New Holland TK4020

The New Holland TK4020 is a tractor produced by New Holland. It is equipped with a 195 ci 3.2 L engine. The listed engine power is Diesel (gross): 64.4 hp / 48.0 kW. Transmission: 16 forward and 8 reverse. Drive type: crawler. Operating weight: 7209 to 7363 pounds.

Engine Power

Diesel (gross): 64.4 hp / 48.0 kW

Drive & Traction

crawler

Fuel & Capacities

21.9 gal 82.9 L

Transmission

16 forward and 8 reverse

Operating Weight

7209 to 7363 pounds

Overview

	2009 - 2017 TK4000 SeriesAgricultural Crawler tractor TK4000 Series Agricultural Crawler tractor

Production
Manufacturer	New Holland
Agricultural Crawler tractor
Built in Jesi, Italy

Variants
TK4020F	narrow chassis
TK4020V	ultra-narrow chassis

New Holland TK4020 Engine
FPT 3.2L 4-cyl diesel
Fuel tank	21.9 gal 82.9 L
Engine details ...

New Holland TK4020 Power
Engine (gross)	64.4 hp 48.0 kW

Mechanical
Drive	crawler
Two-post mid-mount folding ROPS.

Hydraulics
Type	open center
Pump flow	9.4 gpm 35.6 lpm

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/540E

Dimensions & Tracks
Weight	7209 to 7363 pounds
9.8-inch tracks
Full dimensions and tracks ...

Electrical
Charging system	alternator
Battery volts	12

References

Farmer 250V 260V 270V 280V 280P published in 1996, by Fendt
New Holland TK4000 published in 2008
New Holland TK4000 published in 2010

Engine

Engine Detail — 195 ci / 3.2 L Diesel

Manufacturer	FPT F5C
Configuration	turbocharged intercooled diesel, 4-cylinder, liquid-cooled
Displacement	195 ci 3.2 L
Bore/Stroke	3.898x4.094 inches 99 x 104 mm
Emissions	Tier III
Rated Power (gross)	64.4 hp 48.0 kW
Rated RPM	2300
Torque	213.9 lb-ft 290.0 Nm
Torque RPM	1300
Starter	electric
Starter volts	12

Transmission

Transmission options
8-speed
16-speed creeper

Transmission — 8 forward and reverse

Gears	8 forward and reverse
Transmission
Type	creeper
Gears	16 forward and 8 reverse

Dimensions

New Holland TK4020 Tracks
TK4020V width	9.8 inches 24 cm
TK4020F width	11.8 inches 29 cm
TK4020F width	10.6 inches 26 cm
TK4020F width	12.2 inches 30 cm

Dimensions
Length	124.9 inches 317 cm
TK4020V Width	45.3 inches 115 cm
TK4020V Width	51.2 inches 130 cm
Height (steering wheel)	38.6 inches 98 cm
Height (ROPS)	81.9 inches 208 cm
TK4020V Weight	7209 lbs 3270 kg
TK4020F Weight	7363 lbs 3339 kg
TK4020V Gauge	35.4 inches 89 cm
TK4020F Gauge	39.4 inches 100 cm

Photos

New Holland TK4020 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for New Holland TK4020 based on its 64.4 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	6 ft (72 in)1.8 m	Medium Duty	Medium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep	66 to 72 in165 - 180 cm	Medium Duty	Standard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for New Holland TK4020.

Estimated Continuous Field Runtime: 6.5 hrs

Approximately 6.5 hours of continuous field operation at ~75% rated power on a full tank (21.9 gal / 82.9 L).

Estimated 75% Load Fuel Burn~3.3 gal/hr (12.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours