John Deere 60C
The John Deere 60C is a tractor produced by John Deere. It is equipped with a 127.1 ci 2.1 L engine. The listed engine power is Diesel (gross): 58 hp / 43.3 kW. Transmission: 8 forward and reverse. Operating weight: 4189 lbs 1900 kg.
Engine Power
Diesel (gross): 58 hp / 43.3 kW
Fuel & Capacities
13.2 gal
50.0 L
Transmission
8 forward and reverse
Operating Weight
4189 lbs
1900 kg
Overview
 | 2005 - 2015
Milenio C SeriesCompact Utility tractorGoldini built
Milenio C Series
Compact Utility tractor
Goldini built |
|---|
Production | |
|---|---|
Distributor | John Deere |
Manufacturer | Goldini |
Compact Utility tractor | |
Built in Italy | |
John Deere 60C Engine | |
|---|---|
VM Motori 2.1L 3-cyl diesel | |
Fuel tank | 13.2 gal
50.0 L |
Engine details ...  | |
John Deere 60C Power | |
|---|---|
Engine (gross) | 58 hp
43.3 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Power steering | |
Mechanical wet disc brakes | |
Two-post mid-mount folding ROPS. Cab optional. |
Hydraulics | |
|---|---|
Pressure | 2611 psi
180.0 bar |
Pump flow | 10.3 gpm
39.0 lpm |
Tractor hitch | |
|---|---|
Rear Type | II/I |
Rear lift (at ends) | 5071 lbs
2300 kg |
Rear lift (at 24"/610mm) | 3197 lbs
1450 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/540E |
Engine RPM | 540@2430 |
540E@1874 | |
Dimensions & Tires | |
|---|---|
Wheelbase | 66.5 inches
168 cm |
Weight | 4189 lbs
1900 kg |
Front tire | 240/70R16 |
Rear tire | 320/70R24 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 55 |
Battery volts | 12 |
References | |
|---|---|
 | |
Serie Milenio published in 2010, by John Deere |
Engine
Engine Detail — 127.1 ci / 2.1 L Diesel
Manufacturer | VM Motori D703T |
Configuration | turbocharged diesel, 3-cylinder, liquid-cooled |
Displacement | 127.1 ci
2.1 L |
Bore/Stroke | 3.70x3.94 inches
94 x 100 mm |
Rated Power (gross) | 58 hp
43.3 kW |
Fuel system | direct injection |
Air cleaner | dry |
Rated RPM | 2600 |
Torque | 145.3 lb-ft
197.0 Nm |
Torque RPM | 1400 |
Starter | electric |
Starter volts | 12 |
Oil capacity | 5.3 qts
5.0 L |
Coolant capacity | 9.5 qts
9.0 L |
Transmission
Transmission options | |
|---|---|
16-speed | |
8-speed |
Transmission — 16 forward and 8 reverse
Gears | 16 forward and 8 reverse |
Clutch | mechanical dry disc |
Oil capacity | 37 qts
35.0 L |
Transmission — 8 forward and reverse
Gears | 8 forward and reverse |
Dimensions
John Deere 60C Tires | |
|---|---|
Standard tires (ag) | Front: 240/70R16. Rear: 320/70R24 |
Dimensions | |
|---|---|
Wheelbase | 66.5 inches
168 cm |
Length | 128 inches
325 cm |
Width | 50.8 inches*Minimum width
129 cm |
Height (ROPS) | 80.7 inches
204 cm |
Height (cab) | 85.4 inches
216 cm |
Weight | 4189 lbs
1900 kg |
Front tread | 39.3 to 58 inches
99 to 147 cm |
Rear tread | 41.1 to 57 inches
104 to 144 cm |
Recommended Implements & Sizing Guide
Engineering recommendations for John Deere 60C based on its 58 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 6 ft (72 in)1.8 m | Medium Duty | Medium pasture clearing; rear slip-clutch recommended. |
Rotary TillerSeedbed Prep | 66 to 72 in165 - 180 cm | Medium Duty | Standard utility tiller; slip clutch protection required. |
Disc HarrowSecondary Tillage | 7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙 | Medium Duty | Field leveling and clod breaking behind plows. |
Hay BalerHay & Forage | Small Square Baler (14x18")小方捆打捆机 (36x46 cm) | Medium Duty | Classic 2-string baler for horse and small livestock hay. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for John Deere 60C.
Estimated Continuous Field Runtime: 4.4 hrs
Approximately 4.4 hours of continuous field operation at ~75% rated power on a full tank (13.2 gal / 50 L).
Estimated 75% Load Fuel Burn~3 gal/hr (11.4 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
John Deere 60C Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for John Deere 60C.
Converted Equivalents:
Horsepower (HP)58 hp
Kilowatts (kW)43.3 kW
Metric Horsepower (PS / CV)58.8 PS
Direct Competitor Comparison
Compare John Deere 60C against same-era industry alternatives in the same horsepower class.
Current Model
John Deere
John Deere 60C
Engine Power:Diesel (gross): 58 hp / 43.3 kW
★ Baseline Reference
Minneapolis-MolineMarket Competitor
Minneapolis-Moline 4 Star
Engine Power:52.2
Production Years:1959 - 1963
Related models
John Deere 5047D
- Power:
- 47
- Production years:
- 2012 - 2022
John Deere 1745F
- Power:
- 47.3
- Production years:
- 1987 - 1990
John Deere 4700
- Power:
- 48
- Production years:
- 2000 - 2001
John Deere 4320
- Power:
- 48.1
- Production years:
- 2005 - 2014
John Deere 1030
- Power:
- 48.3
- Production years:
- 1973 - 1979