New Holland TK4060

The New Holland TK4060 is a tractor produced by New Holland. It is equipped with a 274.6 ci 4.5 L engine. The listed engine power is Diesel (gross): 99.2 hp / 74.0 kW. Transmission: 16 forward and 8 reverse. Drive type: crawler. Operating weight: 10803 to 11244 pounds.

Engine Power

Diesel (gross): 99.2 hp / 74.0 kW

Drive & Traction

crawler

Fuel & Capacities

29 gal 109.8 L

Transmission

16 forward and 8 reverse

Operating Weight

10803 to 11244 pounds

Overview

	2009 - 2017 TK4000 SeriesAgricultural Crawler tractor TK4000 Series Agricultural Crawler tractor

Production
Manufacturer	New Holland
Agricultural Crawler tractor
Built in Jesi, Italy

New Holland TK4060 Engine
FPT 4.5L 4-cyl diesel
Fuel tank	29 gal 109.8 L
Engine details ...

New Holland TK4060 Power
Engine (gross)	99.2 hp 74.0 kW
PTO (claimed)	86 hp 64.1 kW

Mechanical
Drive	crawler
Platform with folding ROPS. Cab available.

Hydraulics
Type	open center
Pressure	2,755 psi 190.0 bar
Valves	3 to 4
Pump flow	11.9 gpm 45.0 lpm
Total flow	17.7 gpm 67.0 lpm
Steering flow	5.8 gpm 22.0 lpm

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/540E
	540/1000

Dimensions & Tracks
Weight	10803 to 11244 pounds
17.7-inch tracks
Full dimensions and tracks ...

Electrical
Charging system	alternator
Charging amps	120
Battery CCA	800
Battery volts	12

References

New Holland TK4000 published in 2008
New Holland TK4000 published in 2010
New Holland TK4000 published in 2011

Engine

Engine Detail — 274.6 ci / 4.5 L Diesel

Manufacturer	FPT NEF
Configuration	turbocharged intercooled diesel, 4-cylinder, liquid-cooled
Displacement	274.6 ci 4.5 L
Bore/Stroke	4.094x5.196 inches 104 x 132 mm
Emissions	Tier III
Rated Power (gross)	99.2 hp 74.0 kW
Rated RPM	2500
Torque	302.4 lb-ft 410.1 Nm
Torque RPM	1300
Starter	electric
Starter volts	12

Transmission

Transmission options
8-speed unsynchronized
16-speed creeper

Transmission — 8 forward and reverse unsynchronized

Type	unsynchronized
Gears	8 forward and reverse
Transmission
Type	creeper
Gears	16 forward and 8 reverse

Dimensions

New Holland TK4060 Tracks
Width	17.7 inches 44 cm

Dimensions
Length	135 inches 342 cm
Width	68.9 inches 175 cm
ROPS Weight	10803 lbs 4900 kg
Cab Weight	11244 lbs 5100 kg
Gauge	51.2 inches 130 cm

New Holland TK4060 Height
Steering wheel	40.9 inches 103 cm
ROPS	92.6 inches 235 cm
Cab	76.5 inches 194 cm

Photos

New Holland TK4060 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for New Holland TK4060 based on its 99.2 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for New Holland TK4060.

Estimated Continuous Field Runtime: 5.6 hrs

Approximately 5.6 hours of continuous field operation at ~75% rated power on a full tank (29 gal / 109.8 L).

Estimated 75% Load Fuel Burn~5.2 gal/hr (19.5 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours