New Holland TL100

The New Holland TL100 is a tractor produced by New Holland. It is equipped with a 238 ci 3.9 L engine. The listed engine power is Diesel (listed): 95 hp / 70.8 kW. Transmission: 20 forward and 12 reverse. Operating weight: 6834 to 8795 pounds.

Engine Power

Diesel (listed): 95 hp / 70.8 kW

Fuel & Capacities

33.5 gal 126.8 L

Transmission

20 forward and 12 reverse

Operating Weight

6834 to 8795 pounds

Overview

	1999 - 2004 TL SeriesUtility tractor TL Series Utility tractor

Production
Manufacturer	New Holland
Utility tractor
Built in Jesi, Italy

New Holland TL100 Engine
Iveco 3.9L 4-cyl diesel
Fuel tank	33.5 gal 126.8 L
Engine details ...

New Holland TL100 Power
Engine	95 hp 70.8 kW
PTO (claimed)	82 hp 61.1 kW
Drawbar (tested)	55.8 hp 41.6 kW
PTO (tested)	83.1 hp 62.0 kW
Performance test details ...

Mechanical
Two- or four-wheel drive
Steering	hydrostatic power
Differential hydraulic wet disc brakes
Two-post folding ROPS. Cab optional with air-conditioning.

Hydraulics
Type	closed
Valves	2 or 3
Pump flow	14.5 gpm 54.9 lpm

Tractor hitch
Rear Type	II
Rear lift	7900 lbs 3583 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/1000

Dimensions & Tires
Wheelbase	92.2 inches (2WD) 234 cm
	91.1 inches (4WD) 231 cm
Weight	6834 to 8795 pounds
Front tire	10.00-16
2WD Rear tire	600/65R-34
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

Engine

Engine Detail — 238 ci / 3.9 L Diesel

Manufacturer	Iveco 8045
Configuration	turbocharged diesel, 4-cylinder, liquid-cooled
Displacement	238 ci 3.9 L
Bore/Stroke	4.094x4.528 inches 104 x 115 mm
Power	95 hp 70.8 kW
Air cleaner	dual paper elements
Compression	16.5:1
Rated RPM	2500
Starter volts	12

Transmission

Transmission options
24-speed
20-speed

Transmission — 24 forward and 12 reverse

Gears	24 forward and 12 reverse
Clutch	dual dry disc

Transmission — 20 forward and 12 reverse

Gears

20 forward and 12 reverse

Dimensions

New Holland TL100 Tires
2WD Standard tires (ag)	Front: 10.00-16. Rear: 600/65R-34
4WD Standard tires (ag)	Front: 480/65R-24. Rear: 600/65R-34

Dimensions
Wheelbase	92.2 inches (2WD) 234 cm
	91.1 inches (4WD) 231 cm
2WD Length	154 inches 391 cm
4WD Length	160.1 inches 406 cm
Height (cab)	109.7 inches 278 cm
Clearance (front axle)	11.8 inches 29 cm
Front tread	55.2 to 85.4 inches 140 to 216 cm
Rear tread	55.9 to 86.8 inches 141 to 220 cm

New Holland TL100 Weight
2WD ROPS Shipping	6834 lbs 3099 kg
4WD ROPS Shipping	7496 lbs 3400 kg
2WD Cab Shipping	7275 lbs 3299 kg
4WD Cab Shipping	7937 lbs 3600 kg
Operating	8,135 lbs (2WD) 3690 kg
	8,795 lbs (4WD) 3989 kg
Ballasted	10,450 lbs 4740 kg

Tests

OCED Tractor Test 1916
Diesel 24-speed 4WD August 1999 - December 1999, Link: OCED Tractor Test 1916 file
PTO performance
Power at rated engine speed	83.1 hp 62.0 kW
Fuel use	5.0 gal/hour 18.9 l/hour
Power at rated PTO speed	81.9 hp 61.1 kW
Fuel use	4.8 gal/hour 18.2 l/hour
Drawbar performance
Max power	55.8 hp 41.6 kW
Fuel use	4.6 gal/hour 17.4 l/hour
Gear 3ML used for power test.
Max pull	9,525 lbs 4320 kg
Gear 1MH used for pull test.

Photos

New Holland TL100 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for New Holland TL100 based on its 95 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for New Holland TL100.

Estimated Continuous Field Runtime: 6.8 hrs

Approximately 6.8 hours of continuous field operation at ~75% rated power on a full tank (33.5 gal / 126.8 L).

Estimated 75% Load Fuel Burn~4.9 gal/hr (18.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours