New Holland row-crop TM120
The New Holland row-crop TM120 is a tractor produced by New Holland. It is equipped with a 456 ci 7.5 L engine. The listed engine power is Diesel (listed): 120 hp / 89.5 kW. Transmission: Range Command. Operating weight: 11283 to 11859 pounds.
Engine Power
Diesel (listed): 120 hp / 89.5 kW
Fuel & Capacities
75.3 gal
285.0 L
Transmission
Range Command
Operating Weight
11283 to 11859 pounds
Overview
 | 2002 - 2007
TM Series |
|---|
Production | |
|---|---|
Manufacturer | New Holland |
Built in Basildon, England | |
New Holland TM120 Engine | |
|---|---|
New Holland 7.5L 6-cyl diesel | |
Engine details ...  |
New Holland TM120 Power | |
|---|---|
Engine | 120 hp
89.5 kW |
PTO (claimed) | 95 hp
70.8 kW |
Drawbar (tested) | 83.0 hp
61.9 kW |
PTO (tested) | 104.9 hp
78.2 kW |
Performance test details ...  | |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Power steering | |
Differential hydraulic wet disc brakes | |
Cab standard with heat and air-conditioning. Optional heated air-ride seat. |
Capacity | |
|---|---|
Fuel | 75.3 gal
285.0 L |
Hydraulic system | 5.95 gal
22.5 L |
Hydraulics | |
|---|---|
Type | closed center load sensing (CCLS) |
Capacity | 5.95 gal
22.5 L |
Pressure | 2750 psi
189.6 bar |
Rear valves | 4 |
Mid valves | 2 to 4 |
Pump flow | 28 gpm
106.0 lpm |
Total flow | 44 gpm
166.5 lpm |
Steering flow | 16 gpm
60.6 lpm |
Tractor hitch | |
|---|---|
Rear Type | 2 |
Control | electronic lower-link draft control |
Rear lift (at 24"/610mm) | 7,441 lbs
3375 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Clutch | electro-hydraulic wet disc |
Rear PTO Type | 540/1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 107.2 inches
272 cm |
Weight | 11283 to 11859 pounds |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 120 |
Battery CCA | 1300 |
Battery volts | 12 |
Engine
Engine Detail — 456 ci / 7.5 L Diesel
Manufacturer | New Holland |
Configuration | turbocharged diesel, 6-cylinder, liquid-cooled |
Displacement | 456 ci
7.5 L |
Bore/Stroke | 4.40x5.00 inches
112 x 127 mm |
Power | 120 hp
89.5 kW |
Air cleaner | dual paper elements with aspirator |
Compression | 17.0:1 |
Rated RPM | 2200 |
Torque RPM | 1400 |
Starter volts | 12 |
Oil capacity | 20 qts
18.9 L |
Coolant capacity | 26.8 qts
25.4 L |
Transmission
Transmission options | |
|---|---|
17-speed full power shift | |
18-speed full power shift | |
17-speed partial power shift | |
18-speed partial power shift |
Transmission — Power Command
Transmission | Power Command |
Type | full power shift |
Gears | 17 forward and 6 reverse |
Transmission — Power Command
Transmission | Power Command |
Type | full power shift |
Gears | 18 forward and 6 reverse |
Transmission — Range Command
Transmission | Range Command |
Type | partial power shift |
Gears | 17 forward and 6 reverse |
Transmission — Range Command
Transmission | Range Command |
Type | partial power shift |
Gears | 18 forward and 6 reverse |
Dimensions
New Holland TM120 Tires |
|---|
Dimensions | |
|---|---|
Wheelbase | 107.2 inches
272 cm |
Length | 185.7 inches
471 cm |
Height | 111.4 inches
282 cm |
Ground clearance | 16 inches
40 cm |
Front axle | 2WD |
Front axle | 4WD |
Front axle | SuperSteer 4WD |
Front axle | TerraGlide suspension |
Flange rear axle | |
Bar rear axle | 98 inch length
2489 mm |
Bar rear axle | 112 inch length
2844 mm |
2WD Front tread | 60.9 to 88.9 inches
154 to 225 cm |
4WD Front tread | 61.1 to 89.3 inches
155 to 226 cm |
Flange Rear tread | 60 to 87.9 inches
152 to 223 cm |
Rear tread | 60 to 96 inches
152 to 243 cm |
Rear tread | 60 to 100 inches
152 to 254 cm |
New Holland TM120 Weight | |
|---|---|
Shipping | 11,283 lbs (2WD)
5117 kg |
11,859 lbs (4WD)
5379 kg | |
Operating | 11,830 lbs
5366 kg |
Tests
OCED Tractor Test 2085 | |
|---|---|
Diesel Range Command 4WD
December 1, 2002 - March 1, 2003
Link: OCED Tractor Test 2085 file | |
PTO performance | |
Max power | 104.9 hp
78.2 kW |
Fuel use | 6.4 gal/hour
24.2 l/hour |
Power at rated engine speed | 100.7 hp
75.1 kW |
Fuel use | 6.8 gal/hour
25.7 l/hour |
Power at rated PTO speed | 104.1 hp
77.6 kW |
Fuel use | 6.7 gal/hour
25.4 l/hour |
Drawbar performance | |
Max power | 83.0 hp
61.9 kW |
Fuel use | 6.8 gal/hour
25.7 l/hour |
Gear 9 used for power test. | |
Max pull | 12,320 lbs
5588 kg |
Gear 1 used for pull test. | |
Photos
New Holland row-crop TM120
Recommended Implements & Sizing Guide
Engineering recommendations for New Holland row-crop TM120 based on its 120 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for New Holland row-crop TM120.
Estimated Continuous Field Runtime: 12.1 hrs
Approximately 12.1 hours of continuous field operation at ~75% rated power on a full tank (75.3 gal / 285 L).
Estimated 75% Load Fuel Burn~6.2 gal/hr (23.6 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
New Holland row-crop TM120 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for New Holland row-crop TM120.
Converted Equivalents:
Horsepower (HP)120 hp
Kilowatts (kW)89.5 kW
Metric Horsepower (PS / CV)121.7 PS
Direct Competitor Comparison
Compare New Holland row-crop TM120 against same-era industry alternatives in the same horsepower class.
Current Model
New Holland
New Holland row-crop TM120
Engine Power:Diesel (listed): 120 hp / 89.5 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 1046
Engine Power:108.5
Production Years:1971 - 1978
Related models
New Holland Workmaster 95
- Power:
- 97
- Production years:
- 2019 - 2026
New Holland T4.95
- Power:
- 98
- Production years:
- 2013 - 2014
New Holland T5.95
- Power:
- 98
- Production years:
- 2013 - 2016
New Holland TK4.100
- Power:
- 98
- Production years:
- 2018 - 2026
New Holland TK4.100M
- Power:
- 98
- Production years:
- 2018 - 2026