John Deere 6415
The John Deere 6415 is a tractor produced by John Deere. It is equipped with a 276 ci 4.5 L engine. The listed engine power is Diesel (listed): 108 hp / 80.5 kW. Transmission: John Deere PowrQuad. Operating weight: 13,230 lbs 6001 kg.
Overview
![]() | 2005 - 2010
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | John Deere |
Utility tractor | |
Built in Montenegro, Brazil | |
John Deere 6415 Engine | |
|---|---|
John Deere 4.5L 4-cyl diesel | |
Engine details ... |
John Deere 6415 Power | |
|---|---|
Engine | 108 hp
80.5 kW |
PTO (claimed) | 90 hp
67.1 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Differential lock | electro-hydraulic |
Steering | hydrostatic power |
Hydraulic wet disc brakes | |
Cab optional. | |
Capacity | |
|---|---|
Fuel | 40.7 gal
154.0 L |
Hydraulic system | 16.4 gal
62.1 L |
Front axle | 8.7 qts
8.2 L |
Front hubs | 0.8 qts (each)
0.8 L |
Hydraulics | |||
|---|---|---|---|
Type | Closed-center gear pump | ||
Capacity | 16.4 gal
62.1 L | ||
Pressure | 2900 psi
200.0 bar | ||
Valves | 2 to 3 | ||
Pump flow | 17.44 gpm
66.0 lpm | ||
SCV flow | 15.85 gpm
60.0 lpm | ||
Oil type | JD Hy-Gard | JD Hy-Gard | |
JD Hy-Gard |
|---|
Tractor hitch | |
|---|---|
Rear Type | II |
Control | electronic lower link |
Rear lift (at ends) | 5,445 lbs
2469 kg |
Rear lift (at 24"/610mm) | 4,762 lbs
2160 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Clutch | electro-hydraulic |
Rear PTO Type | 540 |
540/1000 | |
Dimensions & Tires | |
|---|---|
Wheelbase | 94.5 inches
240 cm |
Front tire | 14.9-26 |
Rear tire | 23.1-30 |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 90 |
Battery volts | 12 |
Battery AH | 100 |
References | |
|---|---|
![]() | |
6415, 6615 & 7515 Tractors published in 2004, by John Deere |
Engine
Engine Detail — 276 ci / 4.5 L Diesel
Manufacturer | John Deere 4045T |
Configuration | turbocharged diesel, 4-cylinder, liquid-cooled |
Displacement | 276 ci
4.5 L |
Bore/Stroke | 4.15x5.00 inches
105 x 127 mm |
Power | 108 hp
80.5 kW |
Rated RPM | 2300 |
Torque | 290 lb-ft
393.2 Nm |
Torque RPM | 1500 |
Starter volts | 12 |
Coolant capacity | 21.1 qts
20.0 L |
Oil capacity | 12.7 qts
12.0 L |
Transmission
Transmission options | |
|---|---|
12-speed fully synchronized | |
16-speed partial power shift |
Transmission — John Deere SyncroPlus
Transmission | John Deere SyncroPlus |
Type | fully synchronized |
Gears | 12 forward and 4 reverse |
Clutch | hydraulic wet disc PermaClutch II |
Oil capacity | 65.5 qts
62.0 L |
Oil type | JD Hy-Gard |
Three synchronized gears (1-3) in four synchronized ranges (A-D). | |
With 18.4x34 R1 rear tires. | |
![]() | |
JD Hy-Gard |
|---|
Transmission — John Deere PowrQuad
Transmission | John Deere PowrQuad |
Type | partial power shift |
Gears | 16 forward and reverse |
Clutch | hydraulic wet disc PermaClutch II |
Oil capacity | 65.5 qts
62.0 L |
Oil type | JD Hy-Gard |
Four power shift gears (1-4) in four synchronized ranges (A-D). | |
With 18.4-34 R1 rear tires. Reverse speeds are 15% faster than forward speeds. | |
![]() | |
JD Hy-Gard |
|---|
Dimensions
John Deere 6415 Tires | |
|---|---|
Standard tires (ag) | Front: 14.9-26. Rear: 23.1-30 |
Dimensions | |
|---|---|
Wheelbase | 94.5 inches
240 cm |
Length | 180 inches
457 cm |
Height | 106.9 inches
271 cm |
Max weight | 13,230 lbs
6001 kg |
Flange rear axle | |
Rack-and-pinion rear axle | |
Front tread | 63.6 to 84.8 inches
161 to 215 cm |
Rear tread | 71.3 inches
181 cm (flange) |
Rear tread | 61.6 to 91.2 inches
156 to 231 cm (bar) |
Rear tread | 64.4 to 75.5 inches
163 to 191 cm (bar with cab) |
Recommended Implements & Sizing Guide
Engineering recommendations for John Deere 6415 based on its 108 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for John Deere 6415.
Estimated Continuous Field Runtime: 7.2 hrs
Approximately 7.2 hours of continuous field operation at ~75% rated power on a full tank (40.7 gal / 154.1 L).
Engine Crankcase Oil
Transmission & Hydraulic System
Engine Cooling System
John Deere 6415 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for John Deere 6415.
Converted Equivalents:
Direct Competitor Comparison
Compare John Deere 6415 against same-era industry alternatives in the same horsepower class.
John Deere 6415
International Harvester A-766
Related models
John Deere 2755
- Power:
- 88
- Production years:
- 1987 - 1992
John Deere 5820
- Power:
- 88
- Production years:
- 2003 - 2008
John Deere 3040
- Power:
- 88.5
- Production years:
- 1980 - 1987
John Deere 2855N
- Power:
- 88.9
- Production years:
- 1987 - 1992
John Deere 4030
- Power:
- 88.9
- Production years:
- 1973 - 1977



