Poulan PB20H46LT

The Poulan PB20H46LT is a tractor produced by Poulan Lawn Tractors. The listed engine power is Gasoline (gross): 20 hp / 14.9 kW. Transmission: infinite forward and reverse.

Engine Power

Gasoline (gross): 20 hp / 14.9 kW

Fuel & Capacities

1.5 gal 5.7 L

Transmission

infinite forward and reverse

Overview

	2007 300 SeriesLawn tractor 300 Series Lawn tractor

Production
Manufacturer	Poulan (a part of Husqvarna)
Lawn tractor

Poulan PB20H46LT Engine
20HP Briggs & Stratton gasoline
Fuel tank	1.5 gal 5.7 L
Engine details ...

Poulan PB20H46LT Transmission
hydrostatic
Transmission details ...

Mechanical
Two-wheel drive
Steering	manual
Open operator station.

Dimensions & Tires
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

Engine

Engine Detail — Gasoline

Manufacturer	Briggs & Stratton
Fuel Type	Gasoline
Configuration	air-cooled
Power (gross)	20 hp 14.9 kW
Starter volts	12

Transmission

Transmission — infinite forward and reverse belt-driven hydrostatic

Type	belt-driven hydrostatic
Gears	infinite forward and reverse

Dimensions

Poulan PB20H46LT Tires

Dimensions

Attachments

46" Mower deck
Type	mid-mount Poulan
Cutting width	46 inches 116 cm

Recommended Implements & Sizing Guide

Engineering recommendations for Poulan Lawn Tractors Poulan PB20H46LT based on its 20 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	1 to 2 Bottom (12")1 - 2 铧 (30 cm)	Light Duty	Ideal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing	4 ft (48 in)1.2 m	Light Duty	Pasture clipping and light brush under 1" diameter.
Rotary TillerSeedbed Prep	42 to 48 in105 - 120 cm	Light Duty	Covers compact tractor tire width.
Disc HarrowSecondary Tillage	5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)	Light Duty	Small acreage soil break-up and secondary aeration.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Poulan Lawn Tractors Poulan PB20H46LT.

Estimated Continuous Field Runtime: 1.4 hrs

Approximately 1.4 hours of continuous field operation at ~75% rated power on a full tank (1.5 gal / 5.7 L).

Estimated 75% Load Fuel Burn~1 gal/hr (3.9 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours

Poulan Lawn Tractors Poulan PB20H46LT Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Poulan Lawn Tractors Poulan PB20H46LT.

Enter value:

Unit:

Converted Equivalents:

Horsepower (HP)20 hp

Kilowatts (kW)14.9 kW

Metric Horsepower (PS / CV)20.3 PS

Direct Competitor Comparison

Compare Poulan PB20H46LT against same-era industry alternatives in the same horsepower class.

Current Model

Poulan Lawn Tractors