Schluter Compact 1050 V 6

The Schluter Compact 1050 V 6 is a tractor produced by Schluter. It is equipped with a 347.0 ci 5.7 L engine. The listed engine power is Engine Detail — 347.0 ci / 5.7 L (listed): 105 hp / 78.3 kW. Transmission: 12 forward and 5 reverse. Operating weight: 10,143 lbs 4600 kg.

Engine Power

Engine Detail — 347.0 ci / 5.7 L (listed): 105 hp / 78.3 kW

Fuel & Capacities

37.0 gal 140.0 L

Transmission

12 forward and 5 reverse

Operating Weight

10,143 lbs 4600 kg

Overview

	1990 - 1993

Production
Manufacturer	Schluter

Schluter Compact 1050 V 6 Engine
MAN 5.7L 6-cyl
Fuel tank	37.0 gal 140.0 L
Engine details ...

Schluter Compact 1050 V 6 Transmission
12-speed
Transmission details ...

Schluter Compact 1050 V 6 Power
Engine	105 hp 78.3 kW

Mechanical
Four-wheel drive
Steering	hydrostatic power
Drum brakes

Hydraulics
Total flow	14.5 gpm 54.9 lpm

Tractor hitch
Rear lift	8,599.5 lbs 3900 kg
	13,671 lbs (optional) 6201 kg

Power Take-off (PTO)
Rear PTO Type	540/1000

Dimensions & Tires
Wheelbase	99.2 inches 251 cm
Weight	10,143 lbs 4600 kg
Front tire	14.9R28
Rear tire	18.4R38
Full dimensions and tires ...

Engine

Engine Detail — 347.0 ci / 5.7 L

Configuration	6-cylinder
MAN D 0226 ME 51
Displacement	347.0 ci 5.7 L
Bore/Stroke	4.016x4.567 inches 102 x 116 mm
Power	105 hp 78.3 kW
Rated RPM	2200
Torque	295.0 lb-ft 400.0 Nm
Torque RPM	1300

Transmission

Transmission — 12 forward and 5 reverse

Gears

12 forward and 5 reverse

Dimensions

Schluter Compact 1050 V 6 Tires
Ag front	14.9R28
Ag rear	18.4R38

Dimensions
Wheelbase	99.2 inches 251 cm
Length	169.7 inches 431 cm
Height	106.7 inches 271 cm
Weight	10,143 lbs 4600 kg

Photos

Schluter Compact 1050 V 6 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Schluter Compact 1050 V 6 based on its 105 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Schluter Compact 1050 V 6.

Estimated Continuous Field Runtime: 6.8 hrs

Approximately 6.8 hours of continuous field operation at ~75% rated power on a full tank (37 gal / 140.1 L).

Estimated 75% Load Fuel Burn~5.5 gal/hr (20.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours