Schluter Super 1050

The Schluter Super 1050 is a tractor produced by Schluter. It is equipped with a 419.3 ci 6.9 L engine. The listed engine power is Engine Detail — 419.3 ci / 6.9 L (listed): 100 hp / 74.6 kW. Transmission: 12 forward and 6 reverse. Operating weight: 10,109 lbs 4585 kg.

Engine Power

Engine Detail — 419.3 ci / 6.9 L (listed): 100 hp / 74.6 kW

Fuel & Capacities

33.0 gal 124.9 L

Transmission

12 forward and 6 reverse

Operating Weight

10,109 lbs 4585 kg

Overview

	1974 - 1976

Production
Manufacturer	Schluter

Schluter Super 1050 Engine
6.9L 6-cyl
Fuel tank	33.0 gal 124.9 L
Engine details ...

Schluter Super 1050 Transmission
12-speed
Transmission details ...

Schluter Super 1050 Power
Engine	100 hp 74.6 kW

Mechanical
Four-wheel drive
Steering	power assist
Drum brakes

Hydraulics
Total flow	6.9 gpm 26.1 lpm

Tractor hitch
Rear lift	7,056 lbs 3200 kg
	9,922 lbs (optional) 4500 kg

Power Take-off (PTO)
Rear PTO Type	540/1000

Dimensions & Tires
Wheelbase	107.1 inches (2WD) 272 cm
	103.9 inches (4WD) 263 cm
Weight	10,109 lbs 4585 kg
Front tire	11.2-24
Rear tire	16.9-34
Full dimensions and tires ...

Engine

Engine Detail — 419.3 ci / 6.9 L

Manufacturer	SDM 108 W 6
Configuration	6-cylinder
Displacement	419.3 ci 6.9 L
Bore/Stroke	4.252x4.921 inches 108 x 125 mm
Power	100 hp 74.6 kW
Rated RPM	1800
Torque	318.6 lb-ft 432.0 Nm
Torque RPM	1300

Transmission

Transmission — 12 forward and 6 reverse

Gears

12 forward and 6 reverse

Dimensions

Schluter Super 1050 Tires
Ag front	11.2-24
Ag rear	16.9-34

Dimensions
Wheelbase	107.1 inches (2WD) 272 cm
	103.9 inches (4WD) 263 cm
Length	180.7 inches 458 cm
Height	98.8 inches 250 cm
Weight	10,109 lbs 4585 kg

Recommended Implements & Sizing Guide

Engineering recommendations for Schluter Super 1050 based on its 100 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Schluter Super 1050.

Estimated Continuous Field Runtime: 6.3 hrs

Approximately 6.3 hours of continuous field operation at ~75% rated power on a full tank (33 gal / 124.9 L).

Estimated 75% Load Fuel Burn~5.2 gal/hr (19.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours