Schluter Super 950

The Schluter Super 950 is a tractor produced by Schluter. It is equipped with a 403.9 ci 6.6 L engine. The listed engine power is Engine Detail — 403.9 ci / 6.6 L (listed): 95 hp / 70.8 kW. Transmission: 12 forward and 6 reverse. Operating weight: 9161 to 10110 pounds.

Engine Power

Engine Detail — 403.9 ci / 6.6 L (listed): 95 hp / 70.8 kW

Fuel & Capacities

33.0 gal 124.9 L

Transmission

12 forward and 6 reverse

Operating Weight

9161 to 10110 pounds

Overview

	1971 - 1974

Production
Manufacturer	Schluter

Schluter Super 950 Engine
6.6L 6-cyl
Fuel tank	33.0 gal 124.9 L
Engine details ...

Schluter Super 950 Transmission
12-speed
Transmission details ...

Schluter Super 950 Power
Engine	95 hp 70.8 kW

Mechanical
Two- or four-wheel drive
Steering	power assist
Drum brakes

Hydraulics
Total flow	6.9 gpm 26.1 lpm

Tractor hitch
Rear lift	7056 lbs 3200 kg
	9922 lbsOptOptional 4500 kg

Power Take-off (PTO)
Rear PTO Type	540/1000

Dimensions & Tires
Wheelbase	103.9 inches 263 cm
Weight	9161 to 10110 pounds
Front tire	6.50-20
2WD Rear tire	16.9-34
Full dimensions and tires ...

Engine

Engine Detail — 403.9 ci / 6.6 L

Manufacturer	SDM 106 W 6
Configuration	6-cylinder
Displacement	403.9 ci 6.6 L
Bore/Stroke	4.173x4.921 inches 106 x 125 mm
Power	95 hp 70.8 kW
Rated RPM	1800

Transmission

Transmission — 12 forward and 6 reverse

Gears

12 forward and 6 reverse

Dimensions

Schluter Super 950 Tires
2WD Standard tires (ag)	Front: 6.50-20. Rear: 16.9-34
4WD Standard tires (ag)	Front: 11.2-24. Rear: 16.9-34

Dimensions
Wheelbase	103.9 inches 263 cm
Length	171.7 inches 436 cm
Height	97.6 inches 247 cm
2WD Weight	9161 lbs 4155 kg
4WD Weight	10110 lbs 4585 kg

Photos

Schluter Super 950

Recommended Implements & Sizing Guide

Engineering recommendations for Schluter Super 950 based on its 95 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Schluter Super 950.

Estimated Continuous Field Runtime: 6.7 hrs

Approximately 6.7 hours of continuous field operation at ~75% rated power on a full tank (33 gal / 124.9 L).

Estimated 75% Load Fuel Burn~4.9 gal/hr (18.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours