Shibaura S435
The Shibaura S435 is a tractor produced by Shibaura. It is equipped with a 121.7 ci 2.0 L engine. The listed engine power is Diesel (listed): 38 hp / 28.3 kW. Transmission: 12 forward and reverse. Operating weight: 2800 to 3020 pounds.
Engine Power
Diesel (listed): 38 hp / 28.3 kW
Fuel & Capacities
9.8 gal
37.1 L
Transmission
12 forward and reverse
Operating Weight
2800 to 3020 pounds
Overview
 | S SeriesCompact Utility tractor |
|---|---|
S Series | |
Compact Utility tractor | |
Production | |
|---|---|
Manufacturer | Shibaura |
Compact Utility tractor | |
Built in Netherlands | |
Shibaura S435 Engine | |
|---|---|
Shibaura 2.0L 4-cyl diesel | |
Fuel tank | 9.8 gal
37.1 L |
Engine details ...  | |
Shibaura S435 Power | |
|---|---|
Engine | 38 hp
28.3 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Power steering | |
Wet disc brakes | |
Open operator station. |
Tractor hitch | |
|---|---|
Rear Type | I |
Control | position control with available draft control |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540 |
Dimensions & Tires | |
|---|---|
Wheelbase | 69.9 inches
177 cm |
Weight | 2800 to 3020 pounds |
Front tire | 7.5L-15 |
2WD Rear tire | 14.9-24 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
References | |
|---|---|
 | |
S-Series Tractor published by Shibaura | |
U.K. Shibaura Catalog published in 1988, by BV Techno-Import |
Engine
Engine Detail — 121.7 ci / 2.0 L Diesel
Manufacturer | Shibaura N844 |
Configuration | intercooled turbocharged diesel, 4-cylinder, liquid-cooled |
Displacement | 121.7 ci
2.0 L |
Bore/Stroke | 3.31x3.54 inches
84 x 90 mm |
Power | 38 hp
28.3 kW |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission options | |
|---|---|
12-speed | |
12-speed sync shuttle |
Transmission — 12 forward and 4 reverse
Gears | 12 forward and 4 reverse |
Transmission — 12 forward and reverse sync shuttle
Type | sync shuttle |
Gears | 12 forward and reverse |
Dimensions
Shibaura S435 Tires | |
|---|---|
2WD Standard tires (ag) | Front: 7.5L-15. Rear: 14.9-24 |
4WD Standard tires (ag) | Front: 8-16. Rear: 14.9-24 |
Dimensions | |
|---|---|
Wheelbase | 69.9 inches
177 cm |
Length | 126.4 inches
321 cm |
Width | 64 inches
162 cm |
Height | 82.3 inches
209 cm |
2WD Weight | 2800 lbs
1270 kg |
4WD Weight | 3020 lbs
1369 kg |
Ground clearance | 12.6 inches
32 cm |
2WD Front tread | 43.1 inches
109 cm |
4WD Front tread | 45.5 inches
115 cm |
Rear tread | 50.2 inches
127 cm |
Photos
Shibaura S435 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Shibaura S435 based on its 38 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm) | Medium Duty | Standard utility farm tillage. |
Rotary Cutter / MowerMowing & Clearing | 5 ft (60 in)1.5 m | Medium Duty | Pasture maintenance and weeds up to 1.5" diameter. |
Rotary TillerSeedbed Prep | 54 to 60 in135 - 150 cm | Medium Duty | Thorough seedbed preparation in orchards and vegetable plots. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Hay BalerHay & Forage | Small Square Baler (14x18")小方捆打捆机 (36x46 cm) | Medium Duty | Classic 2-string baler for horse and small livestock hay. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Shibaura S435.
Estimated Continuous Field Runtime: 5 hrs
Approximately 5 hours of continuous field operation at ~75% rated power on a full tank (9.8 gal / 37.1 L).
Estimated 75% Load Fuel Burn~2 gal/hr (7.5 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Shibaura S435 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Shibaura S435.
Converted Equivalents:
Horsepower (HP)38 hp
Kilowatts (kW)28.3 kW
Metric Horsepower (PS / CV)38.5 PS
Direct Competitor Comparison
Compare Shibaura S435 against same-era industry alternatives in the same horsepower class.
Current Model
Shibaura
Shibaura S435
Engine Power:Diesel (listed): 38 hp / 28.3 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester TD-6
Engine Power:34.4
Production Years:1940 - 1969
Related models
Shibaura SD3203
- Power:
- 32
- Production years:
- 1980 - 1985
Shibaura SD3243
- Power:
- 32
- Production years:
- 1980 - 1985
Shibaura ST333
- Power:
- 33
- Production years:
- 2016 - 2026
Shibaura SD4000
- Power:
- 38.9
- Production years:
- 1977 - 1980
Shibaura SD3903
- Power:
- 39
- Production years:
- 1980 - 1985