Shibaura SP2140
The Shibaura SP2140 is a tractor produced by Shibaura. It is equipped with a 58.2 ci 1.0 L engine. The listed engine power is Diesel (listed): 20.7 hp / 15.4 kW. Transmission: 6 forward and 2 reverse. Operating weight: 1268 lbs 575 kg.
Engine Power
Diesel (listed): 20.7 hp / 15.4 kW
Fuel & Capacities
4.8 gal
18.2 L
Transmission
6 forward and 2 reverse
Operating Weight
1268 lbs
575 kg
Overview
 | SP SeriesCompact Utility tractor |
|---|---|
SP Series | |
Compact Utility tractor | |
Production | |
|---|---|
Manufacturer | Shibaura |
Compact Utility tractor | |
Variants | |
|---|---|
SP2100 | 2WD |
SP2140 | 4WD |
Shibaura SP2140 Engine | |
|---|---|
Shibaura 1.0L 3-cyl diesel | |
Fuel tank | 4.8 gal
18.2 L |
Engine details ...  | |
Shibaura SP2140 Transmission | |
|---|---|
6-speed synchromesh | |
Transmission details ...  |
Shibaura SP2140 Power | |
|---|---|
Engine | 20.7 hp
15.4 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Manual steering | |
Mechanical drum brakes | |
Open operator station. |
Tractor hitch | |
|---|---|
Rear Type | JIS1 |
Control | position control |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540 (1.375) |
Engine RPM | 535@2600 |
806@2600 | |
1053@2600 | |
Dimensions & Tires | |
|---|---|
Wheelbase | 52.4 inches
133 cm |
Weight | 1268 lbs
575 kg |
Front tire | 6-12 |
Rear tire | 9.5-20 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
Battery AH | 65 |
References | |
|---|---|
 | |
SP Series published by Shibaura | |
U.K. Shibaura Catalog published in 1988, by BV Techno-Import |
Engine
Engine Detail — 58.2 ci / 1.0 L Diesel
Manufacturer | Shibaura S753 |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Displacement | 58.2 ci
1.0 L |
Bore/Stroke | 2.95x2.83 inches
75 x 72 mm |
Power | 20.7 hp
15.4 kW |
Rated RPM | 2600 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — 6 forward and 2 reverse synchromesh
Type | synchromesh |
Gears | 6 forward and 2 reverse |
Clutch | dry disc |
 | |
Dimensions
Shibaura SP2140 Tires | |
|---|---|
Standard tires (ag) | Front: 6-12. Rear: 9.5-20 |
Dimensions | |
|---|---|
Wheelbase | 52.4 inches
133 cm |
Length | 98.7 inches
250 cm |
Width | 41.1 inches
104 cm |
Height | 70.7 inches
179 cm |
Weight | 1268 lbs
575 kg |
Ground clearance | 11 inches
27 cm |
Front tread | 29.1 inches
73 cm |
Rear tread | 31.9 inches
81 cm |
Photos
Shibaura SP2140 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Shibaura SP2140 based on its 20.7 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 4 ft (48 in)1.2 m | Light Duty | Pasture clipping and light brush under 1" diameter. |
Rotary TillerSeedbed Prep | 42 to 48 in105 - 120 cm | Light Duty | Covers compact tractor tire width. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Shibaura SP2140.
Estimated Continuous Field Runtime: 4.5 hrs
Approximately 4.5 hours of continuous field operation at ~75% rated power on a full tank (4.8 gal / 18.2 L).
Estimated 75% Load Fuel Burn~1.1 gal/hr (4.1 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Shibaura SP2140 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Shibaura SP2140.
Converted Equivalents:
Horsepower (HP)20.7 hp
Kilowatts (kW)15.4 kW
Metric Horsepower (PS / CV)21 PS
Direct Competitor Comparison
Compare Shibaura SP2140 against same-era industry alternatives in the same horsepower class.
Current Model
Shibaura
Shibaura SP2140
Engine Power:Diesel (listed): 20.7 hp / 15.4 kW
★ Baseline Reference
Related models
Shibaura P17F
- Power:
- 17
Shibaura SP1740
- Power:
- 17
Shibaura SD1800
- Power:
- 17.8
- Production years:
- 1977 - 1980
Shibaura SD1840
- Power:
- 17.8
- Production years:
- 1977 - 1980
Shibaura SP1800
- Power:
- 17.8