Snapper LT160H42CBV2

The Snapper LT160H42CBV2 is a tractor produced by Snapper Lawn Tractors. It is equipped with a 480 cc 29.3 ci engine. The listed engine power is Gasoline (listed): 16 hp / 11.9 kW. Transmission: Tuff Torq K50.

Engine Power

Gasoline (listed): 16 hp / 11.9 kW

Fuel & Capacities

Gasoline

Transmission

Tuff Torq K50

Overview

	1996 Lawn tractor

Production
Manufacturer	Snapper
Lawn tractor

Snapper LT160H42CBV2 Engine
16HP Briggs & Stratton 480cc 2-cyl gasoline
Engine details ...

Snapper LT160H42CBV2 Transmission
hydrostatic
Transmission details ...

Mechanical
Two-wheel drive
Manual steering
Open operator station.

Power Take-off (PTO)
Mid PTO	independent
Clutch	electric

Dimensions & Tires
Front tire	15x6.00-6
Rear tire	20x10.00-8
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

Engine

Engine Detail — 480 cc / 29.3 ci Gasoline

Manufacturer	Briggs & Stratton 303777
Fuel Type	Gasoline
Configuration	2-cylinder, air-cooled vertical-shaft V-Twin
Displacement	480 cc 29.3 ci
Bore/Stroke	2.68x2.60 inches 68 x 66 mm
Power	16 hp 11.9 kW
Starter	electric
Starter volts	12

Transmission

Transmission — Tuff Torq K50

Transmission	Tuff Torq K50
Type	belt-driven hydrostatic
Gears	infinite forward and reverse

Dimensions

Snapper LT160H42CBV2 Tires
Lawn/turf front	15x6.00-6
Lawn/turf rear	20x10.00-8

Dimensions

Attachments

42" Mower deck
Type	mid-mount Snapper
	2-blade
Cutting width	42 inches 106 cm

Recommended Implements & Sizing Guide

Engineering recommendations for Snapper Lawn Tractors Snapper LT160H42CBV2 based on its 16 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	1 to 2 Bottom (12")1 - 2 铧 (30 cm)	Light Duty	Ideal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing	4 ft (48 in)1.2 m	Light Duty	Pasture clipping and light brush under 1" diameter.
Rotary TillerSeedbed Prep	42 to 48 in105 - 120 cm	Light Duty	Covers compact tractor tire width.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Snapper Lawn Tractors Snapper LT160H42CBV2.

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours

Snapper Lawn Tractors Snapper LT160H42CBV2 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Snapper Lawn Tractors Snapper LT160H42CBV2.

Enter value:

Unit:

Converted Equivalents:

Horsepower (HP)16 hp

Kilowatts (kW)11.9 kW

Metric Horsepower (PS / CV)16.2 PS

Direct Competitor Comparison

Compare Snapper LT160H42CBV2 against same-era industry alternatives in the same horsepower class.

Current Model

Snapper Lawn Tractors