Snapper NXT 2346
The Snapper NXT 2346 is a tractor produced by Snapper Lawn Tractors. It is equipped with a 724 cc 44.18 ci engine. The listed engine power is Gasoline (gross): 23 hp / 17.2 kW. Transmission: Tuff Torq K46. Operating weight: 688 lbs 312 kg.
Engine Power
Gasoline (gross): 23 hp / 17.2 kW
Fuel & Capacities
3.5 gal
13.2 L
Transmission
Tuff Torq K46
Operating Weight
688 lbs
312 kg
Overview
 | 2010 - 2013
NXT SeriesLawn tractor
NXT Series
Lawn tractor |
|---|
Production | |
|---|---|
Manufacturer | Snapper (a part of Briggs & Stratton) |
Lawn tractor | |
Original price | $2,599 (2011 ) |
$2,799 (2012 ) | |
$2,999 (2014 ) | |
Snapper NXT 2346 Engine | |
|---|---|
23HP Briggs & Stratton 724cc 2-cyl gasoline | |
Fuel tank | 3.5 gal
13.2 L |
Engine details ...  | |
Snapper NXT 2346 Transmission | |
|---|---|
hydrostatic | |
Transmission details ...  |
Mechanical | |
|---|---|
Two-wheel drive | |
Steering | manual |
Open operator station. | |
Power Take-off (PTO) | |
|---|---|
Front PTO | independent |
Clutch | electric |
Dimensions & Tires | |
|---|---|
Wheelbase | 50 inches
127 cm |
Weight | 688 lbs
312 kg |
Front tire | 15x6 |
Rear tire | 20x10 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Battery CCA | 230 |
Battery volts | 12 |
References | |
|---|---|
 | |
Product Catalog published in 2013, by Snapper |
Engine
Engine Detail — 724 cc / 44.18 ci Gasoline
Manufacturer | Briggs & Stratton 44L777 |
Fuel Type | Gasoline |
Configuration | 2-cylinder, air-cooled vertical shaft V-Twin |
Displacement | 724 cc
44.18 ci |
Bore/Stroke | 3.12x2.89 inches
79 x 73 mm |
Power (gross) | 23 hp
17.2 kW |
Starter | electric push button |
Starter volts | 12 |
Transmission
Transmission — Tuff Torq K46
Transmission | Tuff Torq K46 |
Type | belt-driven hydrostatic |
Gears | infinite forward and reverse |
 | |
Dimensions
Snapper NXT 2346 Tires | |
|---|---|
Lawn/turf front | 15x6 |
Lawn/turf rear | 20x10 |
Dimensions | |
|---|---|
Wheelbase | 50 inches
127 cm |
Length | 71 inches
180 cm |
Width | 59 inches
149 cm |
Height | 45 inches
114 cm |
Weight | 688 lbs
312 kg |
Front axle | Cast iron |
Attachments
Attachment overview | |
|---|---|
46" mid-mount mower deck | |
Snowblower | |
Blade |
46" Mower deck | |
|---|---|
Type | mid-mount Snapper |
3-blade with electric lift | |
Cutting width | 46 inches
116 cm |
Cut height | 1.5 to 4 inch
3 to 10 cm |
Cut positions | infinite |
Photos
Snapper NXT 2346 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Snapper Lawn Tractors Snapper NXT 2346 based on its 23 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 4 ft (48 in)1.2 m | Light Duty | Pasture clipping and light brush under 1" diameter. |
Rotary TillerSeedbed Prep | 42 to 48 in105 - 120 cm | Light Duty | Covers compact tractor tire width. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Snapper Lawn Tractors Snapper NXT 2346.
Estimated Continuous Field Runtime: 2.9 hrs
Approximately 2.9 hours of continuous field operation at ~75% rated power on a full tank (3.5 gal / 13.2 L).
Estimated 75% Load Fuel Burn~1.2 gal/hr (4.5 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Snapper Lawn Tractors Snapper NXT 2346 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Snapper Lawn Tractors Snapper NXT 2346.
Converted Equivalents:
Horsepower (HP)23 hp
Kilowatts (kW)17.2 kW
Metric Horsepower (PS / CV)23.3 PS
Direct Competitor Comparison
Compare Snapper NXT 2346 against same-era industry alternatives in the same horsepower class.
Current Model
Snapper Lawn Tractors
Snapper NXT 2346
Engine Power:Gasoline (gross): 23 hp / 17.2 kW
★ Baseline Reference
Related models
Snapper lawn tractors LT18538
- Power:
- 18.5
- Production years:
- 2006 - 2010
Snapper lawn tractors ST1842
- Power:
- 18.5
- Production years:
- 2014 - 2024
Snapper lawn tractors NXT 19542
- Power:
- 19.5
- Production years:
- 2011 - 2011
Snapper lawn tractors GT2048H
- Power:
- 20
- Production years:
- 1998 - 1998
Snapper lawn tractors LT200H48
- Power:
- 20
- Production years:
- 2003 - 2005