Sonalika DI-730 II

The Sonalika DI-730 II is a tractor produced by Sonalika. It is equipped with a 109.7 ci 1.8 L engine. The listed engine power is Diesel (listed): 30 hp / 22.4 kW. Transmission: Sliding Mesh. Operating weight: 4,046 lbs 1835 kg.

Engine Power

Diesel (listed): 30 hp / 22.4 kW

Fuel & Capacities

14.5 gal 54.9 L

Transmission

Sliding Mesh

Operating Weight

4,046 lbs 1835 kg

Overview

Production
Manufacturer	Sonalika
Built in India

Sonalika DI-730 II Engine
1.8L 2-cyl diesel
Engine details ...

Sonalika DI-730 II Transmission
8-speed
Transmission details ...

Sonalika DI-730 II Power
Engine	30 hp 22.4 kW
PTO (claimed)	24.67 hp 18.4 kW

Mechanical
Two-wheel drive
Steering	Mechanical Steering
Dry Disc Brake brakes

Capacity
Fuel	14.5 gal 54.9 L
Hydraulic system	14.5 gal 54.9 L

Hydraulics
Capacity	14.5 gal 54.9 L
Pump flow	4.6 gpm 17.4 lpm

Tractor hitch
Rear Type	2
Rear lift	2,646 lbs 1200 kg

Power Take-off (PTO)
Rear PTO	live
Rear PTO Type	1000

Dimensions & Tires
Wheelbase	73.4 inches 186 cm
Weight	4,046 lbs 1835 kg
Front tire	6.00x16
Rear tire	12.4x28
Full dimensions and tires ...

Electrical
Charging system	alternator
Charging amps	36
Battery volts	12
Battery AH	75

Engine

Engine Detail — 109.7 ci / 1.8 L Diesel

Manufacturer	2102 F
Fuel Type	Diesel
Configuration	2-cylinder, liquid-cooled
Displacement	109.7 ci 1.8 L
Bore/Stroke	4.016x4.331 inches 102 x 110 mm
Power	30 hp 22.4 kW
Air cleaner	Oil Bath Air Cleaner
Compression	18.5:1
Rated RPM	2100
Torque	77.4 lb-ft 105.0 Nm
Firing order	1-2
Starter volts	12
Oil capacity	8.9 qts 8.4 L

Transmission

Transmission — Sliding Mesh

Transmission	Sliding Mesh
Gears	8 forward and 2 reverse
Oil capacity	58.12 qts 55.0 L

Dimensions

Sonalika DI-730 II Tires
Ag front	6.00x16
Ag rear	12.4x28

Dimensions
Wheelbase	73.4 inches 186 cm
Length	139.9 inches 355 cm
Width	65.2 inches 165 cm
Height	67.3 inches (steering wheel) 170 cm
	90.5 inches (exhaust) 229 cm
Weight	4,046 lbs 1835 kg
Ground clearance	16.1 inches 40 cm

Photos

Sonalika DI-730 II tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Sonalika DI-730 II based on its 30 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm)	Medium Duty	Standard utility farm tillage.
Rotary Cutter / MowerMowing & Clearing	5 ft (60 in)1.5 m	Medium Duty	Pasture maintenance and weeds up to 1.5" diameter.
Rotary TillerSeedbed Prep	54 to 60 in135 - 150 cm	Medium Duty	Thorough seedbed preparation in orchards and vegetable plots.
Disc HarrowSecondary Tillage	5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)	Light Duty	Small acreage soil break-up and secondary aeration.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Sonalika DI-730 II.

Estimated Continuous Field Runtime: 9.3 hrs

Approximately 9.3 hours of continuous field operation at ~75% rated power on a full tank (14.5 gal / 54.9 L).

Estimated 75% Load Fuel Burn~1.6 gal/hr (5.9 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours