Steiger Bearcat 1000

The Steiger Bearcat 1000 is a tractor produced by Steiger. It is equipped with a 611 ci 10.0 L engine. The listed engine power is Diesel (listed): 235 hp / 175.2 kW; Diesel (listed): 235 hp / 175.2 kW. Transmission: 12 forward and 2 reverse. Operating weight: 2300 lbs 1043 kg.

Engine Power
Diesel (listed): 235 hp / 175.2 kW; Diesel (listed): 235 hp / 175.2 kW
Fuel & Capacities
170 gal 643.5 L
Transmission
12 forward and 2 reverse
Operating Weight
2300 lbs 1043 kg

Overview

Steiger Bearcat 1000 tractor photo
1986 1000 SeriesFour-wheel Drive (4WD) tractor 1000 Series Four-wheel Drive (4WD) tractor
Production
Manufacturer
Steiger
Four-wheel Drive (4WD) tractor
Built in Fargo, North Dakota, USA
Original price was $80,600 in 1986
Steiger Bearcat 1000 Transmission
12-speed full power shift
Transmission details ...
Steiger Bearcat 1000 Power
Engine
235 hp 175.2 kW
PTO (claimed)
200 hp 149.1 kW
Drawbar (tested)
192.82 hp 143.8 kW
PTO (tested)
218.0 hp 162.6 kW
Performance test details ...
Mechanical
Four-wheel drive
Final drives
inboard planetary
double-reduction outboard planetary OptOptional
Steering
hydrostatic power
Hydraulic disc brakes
Cab standard with air-conditioning.
Capacity
Fuel
170 gal 643.5 L
Hydraulic system
18 gal 68.1 L
Hydraulics
Type
closed center load sensing pressure compensating
Capacity
18 gal 68.1 L
Pressure
2500 psi 172.4 bar
Valves
2 to 4
Pump flow
27 gpm 102.2 lpm
Tractor hitch
Rear Type
III OptOptional
Power Take-off (PTO)
Rear PTO
independent OptOptional
Rear PTO Type
1000 (1.75)
Dimensions & Tires
Wheelbase
130 inches 330 cm
Weight
2300 lbs 1043 kg
Front tire
18.4-38
Rear tire
18.4-38
Full dimensions and tires ...
Electrical
Ground
negative
Charging system
alternator
Charging amps
100
Batteries
3
Battery CCA
625
Battery volts
12
References
Bearcat 1000 references literature
Bearcat 1000 published in 1986, by Steiger
Steiger Tractor, Inc. published in 1986

Engine

Engine options
Caterpillar 10.5L 6-cyl diesel
Cummins 10.0L 6-cyl diesel

Engine Detail — 638 ci / 10.5 L Diesel

Manufacturer
Caterpillar 3306DIT
Configuration
turbocharged diesel, 6-cylinder, liquid-cooled inline
Displacement
638 ci 10.5 L
Bore/Stroke
4.75x6.00 inches 121 x 152 mm
Power
235 hp 175.2 kW
Air cleaner
dry
Compression
15:1
Rated RPM
2100
Torque
764 lb-ft 1036.0 Nm
Torque RPM
1300
Starter volts
12
Coolant capacity
58 qts 54.9 L

Engine Detail — 611 ci / 10.0 L Diesel

Manufacturer
Cummins LT-10
Configuration
turbocharged diesel, 6-cylinder, liquid-cooled
Displacement
611 ci 10.0 L
Bore/Stroke
4.95x5.35 inches 126 x 136 mm
Power
235 hp 175.2 kW
Air cleaner
dry
Rated RPM
2100
Torque
780 lb-ft 1057.7 Nm
Torque RPM
1300
Starter volts
12
Coolant capacity
58 qts 54.9 L

Transmission

Transmission — 12 forward and 2 reverse full power shift

Type
full power shift
Gears
12 forward and 2 reverse
Clutch
hydraulic wet disc
With 18.4x38 tires.
Bearcat 1000  full power shift speeds

Dimensions

Steiger Bearcat 1000 Tires
Ag front
18.4-38
Ag rear
18.4-38
Dimensions
Wheelbase
130 inches 330 cm
Length
272.9 inches 693 cm
Width
36 inches (frame) 91 cm
Height (hood)
86.6 inches 219 cm
Height (exhaust)
143 inches 363 cm
Shipping weight
2300 lbs 1043 kg
Max weight
32000 lbs 14515 kg
Ground clearance
32 inches 81 cm
Front axle
Bar: 4.0 by 120 inches 101 by 3048 mm
Bar rear axle
4.0 by 120 inches 101 by 3048 mm
Front tread
60 to 130 inches 152 to 330 cm
Rear tread
60 to 130 inches 152 to 330 cm

Tests

Nebraska Tractor Test 1592
Caterpillar diesel 12-speed 4WD May 6 - 13, 1986 Link: Nebraska Tractor Test 1592 file
PTO performance
Power at rated engine speed
218.0 hp 162.6 kW
Fuel use
13.1 gal/hour 49.6 l/hour
Drawbar performance
Max power
192.82 hp 143.8 kW
Fuel use
13.1 gal/hour 49.6 l/hour
Gear 7 used for power test.
Max pull
28566 lbs 12957 kg
Gear 2 used for pull test.

Photos

Steiger Bearcat 1000 tractor photo

Steiger Bearcat 1000 tractor photo

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Steiger Bearcat 1000.

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Steiger Bearcat 1000 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Steiger Bearcat 1000.

Converted Equivalents:

Horsepower (HP)0 hp
Kilowatts (kW)0 kW
Metric Horsepower (PS / CV)0 PS

Direct Competitor Comparison

Compare Steiger Bearcat 1000 against same-era industry alternatives in the same horsepower class.

Current Model
Steiger

Steiger Bearcat 1000

Engine Power:Diesel (listed): 235 hp / 175.2 kW; Diesel (listed): 235 hp / 175.2 kW
★ Baseline Reference
DeereMarket Competitor

Deere 6R 215

Engine Power:211.9
Production Years:2022 - 2026
CaseIHMarket Competitor

CaseIH 4494

Engine Power:213
Production Years:1984 - 1987
Massey FergusonMarket Competitor

Massey Ferguson 4780

Engine Power:215
Production Years:1983 - 1993
FendtMarket Competitor

Fendt 922 Vario

Engine Power:215
Production Years:2006 - 2010