Steiger Puma 1000

The Steiger Puma 1000 is a tractor produced by Steiger. It is equipped with a 505 ci 8.3 L engine. The listed engine power is Diesel (gross): 190 hp / 141.7 kW. Transmission: 12 forward and 2 reverse. Operating weight: 17000 lbs 7711 kg.

Engine Power

Diesel (gross): 190 hp / 141.7 kW

Fuel & Capacities

115 gal 435.3 L

Transmission

12 forward and 2 reverse

Operating Weight

17000 lbs 7711 kg

Overview

	1986 - 1988 1000 SeriesFour-wheel Drive (4WD) tractor 1000 Series Four-wheel Drive (4WD) tractor

Production
Manufacturer	Steiger
Four-wheel Drive (4WD) tractor
Built in Fargo, North Dakota, USA

Variants
9110	similar CaseIH model

Steiger Puma 1000 Engine
CDC 8.3L 6-cyl diesel
Engine details ...

Steiger Puma 1000 Transmission
12-speed full power shift
Transmission details ...

Steiger Puma 1000 Power
Engine (gross)	190 hp 141.7 kW
PTO (claimed)	168 hp 125.3 kW

Mechanical
Four-wheel drive
Final drives	inboard planetary
Steering	hydrostatic power for steerable front axle and articulated chassis
Hydraulic disc brakes
Cab standard with air-conditioning.

Capacity
Fuel	115 gal 435.3 L
Hydraulic system	18 gal 68.1 L

Hydraulics
Type	closed center
Capacity	18 gal 68.1 L
Pressure	2500 psi 172.4 bar
Valves	2 to 4
Pump flow	27 gpm 102.2 lpm

Tractor hitch
Rear Type	III OptOptional

Power Take-off (PTO)
Rear PTO	independent OptOptional
Rear PTO Type	1000 (1.75)

Dimensions & Tires
Wheelbase	120.38 inches 305 cm
	124 inches (steerable axle) 314 cm
Weight	17000 lbs 7711 kg
Front tire	18.4-38
Rear tire	18.4-38
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	105
Batteries	2
Battery CCA	625
Battery volts	12

References

Puma 1000 published in 1986, by Steiger
Steiger Tractor, Inc. published in 1986

Engine

Engine Detail — 505 ci / 8.3 L Diesel

Manufacturer	CDC 6CTA
Configuration	turbocharged diesel, 6-cylinder, liquid-cooled inline
Displacement	505 ci 8.3 L
Bore/Stroke	4.49x5.32 inches 114 x 135 mm
Power (gross)	190 hp 141.7 kW
Air cleaner	dry
Rated RPM	2100
Torque	618 lb-ft 838.0 Nm
Torque RPM	1500
Starter volts	12
Coolant capacity	35.2 qts 33.3 L

Transmission

Transmission — 12 forward and 2 reverse full power shift

Type	full power shift
Gears	12 forward and 2 reverse
Clutch	hydraulic wet disc
With 18.4x38 tires.

Dimensions

Steiger Puma 1000 Tires
Ag front	18.4-38
Ag rear	18.4-38

Dimensions
Wheelbase	120.38 inches 305 cm
	124 inches (steerable axle) 314 cm
Length	241.6 inches 613 cm
Height (hood)	82.1 inches 208 cm
Height (cab)	129.55 inches 329 cm
Shipping weight	17000 lbs 7711 kg
Max weight	24000 lbs 10886 kg
Front axle	Bar: 4 by 119.5 inches 101 by 3035 mm
Bar rear axle	4 by 119.5 inches 101 by 3035 mm
Front tread	60 to 130 inches 152 to 330 cm
Rear tread	60 to 130 inches 152 to 330 cm

Photos

Steiger Puma 1000 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Steiger Puma 1000 based on its 190 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	5 to 7 Bottom (18")5 - 7 铧 (45 cm)	Commercial / Field Scale	Large acreage tillage; requires front ballast weights.
Rotary Cutter / MowerMowing & Clearing	15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼	Commercial / Field Scale	Large commercial field and roadside mowing operations.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙	Commercial / Field Scale	Wide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage	Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m)	Commercial / Field Scale	High-capacity commercial forage harvesting (1000 RPM PTO).

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Steiger Puma 1000.

Estimated Continuous Field Runtime: 11.6 hrs

Approximately 11.6 hours of continuous field operation at ~75% rated power on a full tank (115 gal / 435.3 L).

Estimated 75% Load Fuel Burn~9.9 gal/hr (37.4 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours