Steiger Panther IV KS-325

The Steiger Panther IV KS-325 is a tractor produced by Steiger. It is equipped with a 855 ci 14.0 L engine. The listed engine power is Diesel (listed): 325 hp / 242.4 kW. Transmission: Allison HT 754CRD. Operating weight: 26994 lbs 12244 kg.

Engine Power

Diesel (listed): 325 hp / 242.4 kW

Fuel & Capacities

225 gal 851.6 L

Transmission

Allison HT 754CRD

Operating Weight

26994 lbs 12244 kg

Overview

	1984 - 1985 IV SeriesFour-wheel Drive (4WD) tractor IV Series Four-wheel Drive (4WD) tractor

Production
Manufacturer	Steiger
Four-wheel Drive (4WD) tractor
Built in Fargo, North Dakota, USA

Variants
CM325	Caterpillar gear shift
CS325	Caterpillar power shift
KM325	Cummins gear shift
KS325	Cummins power shift
SM325	Komatsu gear shift

Steiger Panther IV KS-325 Engine
Cummins 14.0L 6-cyl diesel
Fuel tank	225 gal 851.6 L
Engine details ...

Steiger Panther IV KS-325 Transmission
10-speed power shift
Transmission details ...

Steiger Panther IV KS-325 Power
Engine	325 hp 242.4 kW
Drawbar (claimed)	265 hp 197.6 kW

Mechanical
Four-wheel drive
Final drives	outboard planetary
Articulated power steering
Hydraulic disc brakes
Cab standard with air-conditioning.

Hydraulics
Type	open center
Pressure	2250 psi 155.1 bar
Valves	3 to 5
Pump flow	28.6 gpm 108.3 lpm

Tractor hitch
Rear Type	III OptOptional

Dimensions & Tires
Wheelbase	132.5 inches 336 cm
Weight	26994 lbs 12244 kg
Front tire	20.8-38
Rear tire	20.8-38
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	90
Batteries	4
Battery volts	12

References

Cougar IV/Panter IV Steigermatic published in 1984

Engine

Engine Detail — 855 ci / 14.0 L Diesel

Manufacturer	Cummins NT-855-A325
Configuration	turbocharged diesel, 6-cylinder, liquid-cooled inline
Displacement	855 ci 14.0 L
Bore/Stroke	5.50x6.00 inches 140 x 152 mm
Power	325 hp 242.4 kW
Rated RPM	2100
Torque	1081 lb-ft 1465.8 Nm
Torque RPM	1400
Starter type	electric
Oil capacity	35 qts 33.1 L
Coolant capacity	63 qts 59.6 L

Transmission

Transmission — Allison HT 754CRD

Transmission	Allison HT 754CRD
Type	power shift
Gears	10 forward and 2 reverse

Dimensions

Steiger Panther IV KS-325 Tires
Ag front	20.8-38
Ag rear	20.8-38
Ag front	24.5-32
	30.5-32
	23.1-34
Ag rear	24.5-32
	30.5-32
	23.1-34

Dimensions
Wheelbase	132.5 inches 336 cm
Length	266.2 inches 676 cm
Width	52 inches (cab) 132 cm
	95.7 inches (fenders) 243 cm
Shipping weight	26994 lbs 12244 kg
Max weight	34000 lbs 15422 kg
Front tread	79 to 136.3 inches 200 to 346 cm
Rear tread	79 to 136.3 inches 200 to 346 cm

Steiger Panther IV KS-325 Height
Hood	94.7 inches 240 cm
Cab	134.7 inches 342 cm
Exhaust	155.7 inches 395 cm

Photos

Steiger Panther IV KS-325

Recommended Implements & Sizing Guide

Engineering recommendations for Steiger Panther IV KS-325 based on its 325 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	8+ Bottom On-Land Hitch8+ 铧重型机外牵引犁	Commercial / Field Scale	High horsepower articulated/4WD field plowing.
Rotary Cutter / MowerMowing & Clearing	15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼	Commercial / Field Scale	Large commercial field and roadside mowing operations.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	24 to 36 ft Heavy Duty Field Disc7.3 - 11.0 m 超宽重型整地耙	Commercial / Field Scale	Broad-acre grain tillage for high-drawbar tractors.
Hay BalerHay & Forage	Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m)	Commercial / Field Scale	High-capacity commercial forage harvesting (1000 RPM PTO).

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Steiger Panther IV KS-325.

Estimated Continuous Field Runtime: 13.3 hrs

Approximately 13.3 hours of continuous field operation at ~75% rated power on a full tank (225 gal / 851.7 L).

Estimated 75% Load Fuel Burn~16.9 gal/hr (64 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours