Steyr 9094

The Steyr 9094 is a tractor produced by Steyr. It is equipped with a 253.6 ci 4.2 L engine. The listed engine power is Diesel (listed): 94 hp / 70.1 kW. Transmission: Steyr-Power. Operating weight: 8,644 lbs 3920 kg.

Engine Power
Diesel (listed): 94 hp / 70.1 kW
Fuel & Capacities
26.4 gal 99.9 L
Transmission
Steyr-Power
Operating Weight
8,644 lbs 3920 kg

Overview

Steyr 9094 tractor photo
1993 - 1995 9000 SeriesRow-Crop tractor 9000 Series Row-Crop tractor
Production
Manufacturer
Steyr
Row-Crop tractor
Steyr 9094 Engine
MWM 4.2L 4-cyl diesel
Fuel tank
26.4 gal 99.9 L
39.6 gal*Total capacity with optional 50L fuel tank. 149.9 L
Engine details ...
Steyr 9094 Power
Engine
94 hp 70.1 kW
PTO (claimed)
87 hp 64.9 kW
Mechanical
Four-wheel drive
Power steering
Hydraulic wet disc brakes
Trailer brakes
hydraulic OptOptional
pneumatic OptOptional
Cab standard with heat. Air-conditioning optional.
Hydraulics
Pressure
2538 psi 175.0 bar
Pump flow
13.2 gpm 50.0 lpm
25.4 gpmOptOptional 96.1 lpm
Total flow
28.3 gpm 107.1 lpm
40.4 gpmOptOptional 152.9 lpm
Tractor hitch
Rear lift
9922.5 lbs 4500 kg
Power Take-off (PTO)
Rear PTO
independent
Rear PTO Type
540/1000
Engine RPM
390@1933
540@2045
540E@1506
1000@2130
Front PTO
optional
Front PTO Type
1000
Engine RPM
1000@1933
Dimensions & Tires
Wheelbase
97.5 inches 247 cm
Weight
8,644 lbs 3920 kg
Front tire
14.9R24
Rear tire
16.9R38
Full dimensions and tires ...
References
9094 references literature
Steyr 9000 published in 1993

Engine

Engine Detail — 253.6 ci / 4.2 L Diesel

Manufacturer
MWM WD 401.85
Configuration
turbocharged diesel, 4-cylinder, liquid-cooled
Displacement
253.6 ci 4.2 L
Bore/Stroke
4.13x4.72 inches 105 x 120 mm
Power
94 hp 70.1 kW
Rated RPM
2300
Torque
260 lb-ft 352.6 Nm
Torque RPM
1500

Transmission

Transmission options
16-speed synchronized
16-speed

Transmission — 16 forward and 8 reverse synchronized

Type
synchronized
Gears
16 forward and 8 reverse

Transmission — Steyr-Power

Transmission
Steyr-Power
Gears
16 forward and reverse

Dimensions

Steyr 9094 Tires
Standard tires (ag)
Front: 14.9R24. Rear: 16.9R38
Dimensions
Wheelbase
97.5 inches 247 cm
Length
165.2 inches 419 cm
Width
81.2 inches 206 cm
Height
107.5 inches 273 cm
Weight
8,644 lbs 3920 kg
Clearance (front axle)
18.7 inches 47 cm
Front tread
59.4 to 63.3 inches 150 to 160 cm
Rear tread
63 to 67.1 inches 160 to 170 cm

Photos

Steyr 9094 tractor photo

Steyr 9094 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Steyr 9094 based on its 94 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)Heavy DutyHeavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing
7 to 8 ft (84-96 in)2.1 - 2.4 mHeavy DutyHeavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep
78 to 84 in200 - 215 cmHeavy DutyHeavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage
10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙Heavy DutyAggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage
4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机Heavy DutySilage and dry hay; 540 RPM PTO with slip-clutch.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Steyr 9094.

Estimated Continuous Field Runtime: 5.4 hrs

Approximately 5.4 hours of continuous field operation at ~75% rated power on a full tank (26.4 gal / 99.9 L).

Estimated 75% Load Fuel Burn~4.9 gal/hr (18.5 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Steyr 9094 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Steyr 9094.

Converted Equivalents:

Horsepower (HP)94 hp
Kilowatts (kW)70.1 kW
Metric Horsepower (PS / CV)95.3 PS

Direct Competitor Comparison

Compare Steyr 9094 against same-era industry alternatives in the same horsepower class.

Current Model
Steyr

Steyr 9094

Engine Power:Diesel (listed): 94 hp / 70.1 kW
★ Baseline Reference
KubotaMarket Competitor

Kubota M8540

Engine Power:84.6
Production Years:2007 - 2013
Deutz-FahrMarket Competitor

Deutz-Fahr Intrac 2005

Engine Power:84.8
Production Years:1974 - 1975
CaseIHMarket Competitor

CaseIH 1494

Engine Power:85
Production Years:1983 - 1988
DeereMarket Competitor

Deere 3400

Engine Power:85
Production Years:1995 - 1998