Deutz-Fahr Intrac 2005

The Deutz-Fahr Intrac 2005 is a tractor produced by Deutz Fahr. It is equipped with a 287.40 ci 4.7 L engine. The listed engine power is Diesel (gross): 84.8 hp / 63.2 kW. Transmission: infinite forward and reverse (2-range). Drive type: 4x4 4WD. Operating weight: 5512 lbs 2500 kg.

Engine Power

Diesel (gross): 84.8 hp / 63.2 kW

Drive & Traction

4x4 4WD

Fuel & Capacities

37 gal 140.0 L

Transmission

infinite forward and reverse (2-range)

Operating Weight

5512 lbs 2500 kg

Overview

	1974 - 1975 Intrac 2000 SeriesTool Carrier tractor Intrac 2000 Series Tool Carrier tractor

Production
Manufacturer	Deutz-Fahr
Tool Carrier tractor

Deutz-Fahr Intrac 2005 Engine
Deutz 4.7L 5-cyl diesel
Fuel tank	37 gal 140.0 L
Engine details ...

Deutz-Fahr Intrac 2005 Transmission
hydrostatic
Transmission details ...

Deutz-Fahr Intrac 2005 Power
Engine (gross)	84.8 hp 63.2 kW

Mechanical
Drive	4x4 4WD
Power steering
Drum brakes
Cab standard.

Tractor hitch
Rear Type	II
Rear lift	7055 lbs 3200 kg
Front Hitch	I
Front lift	3527 lbs 1599 kg

Power Take-off (PTO)
Rear PTO Type	540/1000 (1.375)
Engine RPM	540@2300
	1000@2300
Front PTO Type	1000 (1.375)
Engine RPM	1000@2300

Dimensions & Tires
Wheelbase	98.4 inches 249 cm
Weight	5512 lbs 2500 kg
Front tire	12.5-20
Rear tire	12.5-20
Full dimensions and tires ...

References

Intrac Sytem 2000 - Intrac 2005 published in 1974, by Deutz

Engine

Engine Detail — 287.40 ci / 4.7 L Diesel

Manufacturer	Deutz F5L912
Fuel Type	Diesel
Configuration	5-cylinder, air-cooled
Displacement	287.40 ci 4.7 L
Bore/Stroke	3.94x4.72 inches 100 x 120 mm
Power (gross)	84.8 hp 63.2 kW
Rated RPM	2500

Transmission

Transmission — infinite forward and reverse (2-range) hydrostatic

Type	hydrostatic
Gears	infinite forward and reverse (2-range)

Dimensions

Deutz-Fahr Intrac 2005 Tires
Ag front	12.5-20
Ag rear	12.5-20
Ag front	9.5/9-30
	11.2/10-28
	13/11.25-24
	14.9/80-24
	14.5-20
	14.5-24
Ag rear	9.5/9-30
	11.2/10-28
	13/11.25-24
	14.9/80-24
	14.5-20
	14.5-24

Dimensions
Wheelbase	98.4 inches 249 cm
Length	173.2 inches 439 cm
Width	86.6 inches 219 cm
Height (cab)	99.4 inches 252 cm
Weight	5512 lbs 2500 kg
Ground clearance	19.7 inches 50 cm

Photos

Deutz-Fahr Intrac 2005 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Deutz Fahr Deutz-Fahr Intrac 2005 based on its 84.8 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Deutz Fahr Deutz-Fahr Intrac 2005.

Estimated Continuous Field Runtime: 8.4 hrs

Approximately 8.4 hours of continuous field operation at ~75% rated power on a full tank (37 gal / 140.1 L).

Estimated 75% Load Fuel Burn~4.4 gal/hr (16.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours

Deutz Fahr Deutz-Fahr Intrac 2005 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Deutz Fahr Deutz-Fahr Intrac 2005.

Enter value:

Unit:

Converted Equivalents:

Horsepower (HP)84.8 hp

Kilowatts (kW)63.2 kW

Metric Horsepower (PS / CV)86 PS

Direct Competitor Comparison

Compare Deutz-Fahr Intrac 2005 against same-era industry alternatives in the same horsepower class.

Current Model

Deutz Fahr