Steyr 9095MT
The Steyr 9095MT is a tractor produced by Steyr. It is equipped with a 268.3 ci 4.4 L engine. The listed engine power is Diesel (gross): 92.5 hp / 69.0 kW. Transmission: Power-2. Operating weight: 9215 lbs 4179 kg.
Engine Power
Diesel (gross): 92.5 hp / 69.0 kW
Fuel & Capacities
26.4 gal
99.9 L
Transmission
Power-2
Operating Weight
9215 lbs
4179 kg
Overview
 | 2008 - 2011
9000MT SeriesUtility tractor
9000MT Series
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Steyr |
Utility tractor | |
Steyr 9095MT Engine | |
|---|---|
Sisu 4.4L 4-cyl diesel | |
Fuel tank | 26.4 gal
99.9 L |
Engine details ...  | |
Steyr 9095MT Transmission | |
|---|---|
16-speed | |
Transmission details ...  |
Steyr 9095MT Power | |
|---|---|
Engine (gross) | 92.5 hp
69.0 kW |
Engine (max) | 93 hp
69.4 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Power steering | |
Hydraulic wet disc brakes | |
Trailer brakes | pneumatic OptOptional |
hydraulic OptOptional | |
Cab standard with heater. Available air-conditioning. | |
Hydraulics | |
|---|---|
Pressure | 2538 psi
175.0 bar |
Valves | 2 or 3 |
Pump flow | 13.2 gpm
50.0 lpm |
22.7 gpm*With optional triple pump.
85.9 lpm | |
Steering flow | 9 gpm
34.1 lpm |
Tractor hitch | |
|---|---|
Rear lift | 10803 lbs
4900 kg |
Front lift | 5511 lbs
2499 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 430/540/540E/1000 |
Engine RPM | 430@2130 |
540@2045 | |
540E@1506 | |
1000@2130 | |
Front PTO | independent OptOptional |
Front PTO Type | 1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 97.7 inches
248 cm |
Weight | 9215 lbs
4179 kg |
Front tire | 14.9R24 |
Rear tire | 18.4R34 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Battery volts | 12 |
Engine
Engine Detail — 268.3 ci / 4.4 L Diesel
Manufacturer | Sisu |
Configuration | turbocharged intercooled diesel, 4-cylinder, liquid-cooled |
Displacement | 268.3 ci
4.4 L |
Bore/Stroke | 4.25x4.72 inches
108 x 120 mm |
Emissions | Tier III |
Rated Power (gross) | 92.5 hp
69.0 kW |
Maximum Power (gross) | 93 hp
69.4 kW |
Rated RPM | 2300 |
Torque | 269.2 lb-ft
365.0 Nm |
Torque RPM | 1400 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — Power-2
Transmission | Power-2 |
Gears | 16 forward and 8 reverse |
Dimensions
Steyr 9095MT Tires | |
|---|---|
Standard tires (ag) | Front: 14.9R24. Rear: 18.4R34 |
Dimensions | |
|---|---|
Wheelbase | 97.7 inches
248 cm |
Length | 166 inches
421 cm |
Width | 85.4 inches
216 cm |
Height (cab) | 107.5 inches
273 cm |
Shipping weight | 9215 lbs
4179 kg |
Max weight | 15873 lbs
7199 kg |
Front tread | 66.7 inches
169 cm |
Rear tread | 66.9 inches
169 cm |
Recommended Implements & Sizing Guide
Engineering recommendations for Steyr 9095MT based on its 92.5 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 7 to 8 ft (84-96 in)2.1 - 2.4 m | Heavy Duty | Heavy-duty twin spindle cutter for overgrown acreage. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Steyr 9095MT.
Estimated Continuous Field Runtime: 5.5 hrs
Approximately 5.5 hours of continuous field operation at ~75% rated power on a full tank (26.4 gal / 99.9 L).
Estimated 75% Load Fuel Burn~4.8 gal/hr (18.2 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Steyr 9095MT Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Steyr 9095MT.
Converted Equivalents:
Horsepower (HP)92.5 hp
Kilowatts (kW)69 kW
Metric Horsepower (PS / CV)93.8 PS
Direct Competitor Comparison
Compare Steyr 9095MT against same-era industry alternatives in the same horsepower class.
Current Model
Steyr
Steyr 9095MT
Engine Power:Diesel (gross): 92.5 hp / 69.0 kW
★ Baseline Reference
Related models
Steyr M 975
- Power:
- 75
- Production years:
- 1994 - 2004
Steyr 375
- Power:
- 76
- Production years:
- 2003 - 2008
Steyr 9078
- Power:
- 78
- Production years:
- 1993 - 1995
Steyr M 9078
- Power:
- 78
- Production years:
- 1994 - 2003
Steyr 8090
- Power:
- 80
- Production years:
- 1983 - 1992