Ursus 8024 Mido
The Ursus 8024 Mido is a tractor produced by Ursus. It is equipped with a 268.4 ci 4.4 L engine. The listed engine power is Diesel (listed): 108.6 hp / 81.0 kW. Transmission: 8 forward and reverse. Operating weight: 9039 lbs 4100 kg.
Engine Power
Diesel (listed): 108.6 hp / 81.0 kW
Fuel & Capacities
47.6 gal
180.2 L
Transmission
8 forward and reverse
Operating Weight
9039 lbs
4100 kg
Overview
 | 2009 - 2011 |
|---|
Production | |
|---|---|
Manufacturer | Ursus |
Built in Warsaw, Poland | |
Ursus 8024 Engine | |
|---|---|
Perkins 4.4L 4-cyl diesel | |
Fuel tank | 47.6 gal
180.2 L |
Engine details ...  | |
Ursus 8024 Power | |
|---|---|
Engine | 108.6 hp
81.0 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Power steering | |
Cab standard with available air-conditioning. |
Hydraulics | |
|---|---|
Pump flow | 16.4 gpm
62.1 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Rear lift | 9921 lbs
4500 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/1000 |
Dimensions & Tires | |
|---|---|
Weight | 9039 lbs
4100 kg |
Front tire | 380/70R24 |
Rear tire | 480/70R34 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Charging system | alternator |
Charging amps | 55 |
Engine
Engine Detail — 268.4 ci / 4.4 L Diesel
Manufacturer | Perkins 1104D-44TA |
Configuration | turbocharged aftercooled diesel, 4-cylinder, liquid-cooled |
Displacement | 268.4 ci
4.4 L |
Bore/Stroke | 4.252x4.724 inches
108 x 120 mm |
Emissions | Stage IIIA |
Power | 108.6 hp
81.0 kW |
Torque | 306.8 lb-ft
416.0 Nm |
Torque RPM | 1400 |
Starter type | electric |
Transmission
Transmission options | |
|---|---|
12-speed | |
8-speed |
Transmission — 12 forward and 4 reverse
Gears | 12 forward and 4 reverse |
Clutch | dry disc |
Transmission — 8 forward and reverse
Gears | 8 forward and reverse |
Dimensions
Ursus 8024 Tires | |
|---|---|
Standard tires (ag) | Front: 380/70R24. Rear: 480/70R34 |
Dimensions | |
|---|---|
Length | 157.5 inches
400 cm |
Width | 86.6 inches
219 cm |
Height | 108.3 inches
275 cm |
Weight | 9039 lbs
4100 kg |
Photos
Ursus 8024 Mido tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Ursus 8024 Mido based on its 108.6 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Ursus 8024 Mido.
Estimated Continuous Field Runtime: 8.4 hrs
Approximately 8.4 hours of continuous field operation at ~75% rated power on a full tank (47.6 gal / 180.2 L).
Estimated 75% Load Fuel Burn~5.6 gal/hr (21.4 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Ursus 8024 Mido Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Ursus 8024 Mido.
Converted Equivalents:
Horsepower (HP)108.6 hp
Kilowatts (kW)81 kW
Metric Horsepower (PS / CV)110.1 PS
Direct Competitor Comparison
Compare Ursus 8024 Mido against same-era industry alternatives in the same horsepower class.
Current Model
Ursus
Ursus 8024 Mido
Engine Power:Diesel (listed): 108.6 hp / 81.0 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester A-766
Engine Power:98
Production Years:1972 - 1978
Related models
Ursus 6824
- Power:
- 91.2
- Production years:
- 2009 - 2011
Ursus 1132
- Power:
- 94.5
- Production years:
- 1991 - 2009
Ursus 1134
- Power:
- 94.5
- Production years:
- 1991 - 2009
Ursus 1014
- Power:
- 96
- Production years:
- 1984 - 2009
Ursus 1002
- Power:
- 100