Valmet 365
The Valmet 365 is a tractor produced by Valmet. It is equipped with a 201.4 ci 3.3 L engine. The listed engine power is Diesel (listed): 61 hp / 45.5 kW. Transmission: 12 forward and 8 reverse. Operating weight: 6217 to 6702 pounds.
Engine Power
Diesel (listed): 61 hp / 45.5 kW
Fuel & Capacities
19.3 gal
73.1 L
Transmission
12 forward and 8 reverse
Operating Weight
6217 to 6702 pounds
Overview
 | 1994 - 1997
65 SeriesUtility tractor
65 Series
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Valmet |
Utility tractor | |
Valmet 365 Engine | |
|---|---|
Valmet 3.3L 3-cyl diesel | |
Fuel tank | 19.3 gal
73.1 L |
Engine details ...  | |
Valmet 365 Power | |
|---|---|
Engine | 61 hp
45.5 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Power steering | |
Wet disc brakes |
Hydraulics | |
|---|---|
Pump flow | 10.3 gpm
39.0 lpm |
Tractor hitch | |
|---|---|
Rear lift | 5,512 lbs
2500 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540/750 |
Dimensions & Tires | |
|---|---|
2WD Wheelbase | 83.2 inches
211 cm |
4WD Wheelbase | 88.8 inches
225 cm |
Weight | 6217 to 6702 pounds |
Front tire | 10.00-16 |
2WD Rear tire | 16.9-30 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 45 |
Battery volts | 12 |
References | |
|---|---|
 | |
M5 - Mezzo - Mega published in 1995, by Valmet |
Engine
Engine Detail — 201.4 ci / 3.3 L Diesel
Manufacturer | Valmet 320 DS |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Displacement | 201.4 ci
3.3 L |
Bore/Stroke | 4.252x4.724 inches
108 x 120 mm |
Power | 61 hp
45.5 kW |
Compression | 16.5:1 |
Rated RPM | 2350 |
Starter volts | 12 |
Transmission
Transmission options | |
|---|---|
8-speed | |
12-speed creeper |
Transmission — 8 forward and 4 reverse
Gears | 8 forward and 4 reverse |
Four gears (1-4) in two ranges (low/high) plus reverse range. | |
With 16.9R30 rear tires. | |
 | |
Transmission — 12 forward and 8 reverse creeper
Type | creeper |
Gears | 12 forward and 8 reverse |
Creeper option adds an additional four speeds forward and reverse. | |
With 16.9R30 rear tires. | |
 | |
Dimensions
Valmet 365 Tires | |
|---|---|
2WD Standard tires (ag) | Front: 10.00-16. Rear: 16.9-30 |
4WD Standard tires (ag) | Front: 12.4R24. Rear: 19.6R34 |
Dimensions | |
|---|---|
2WD Wheelbase | 83.2 inches
211 cm |
4WD Wheelbase | 88.8 inches
225 cm |
2WD Length | 146.1 inches
371 cm |
4WD Length | 152.4 inches
387 cm |
Width | 79.9 inches
202 cm |
2WD Weight | 6217 lbs
2820 kg |
4WD Weight | 6702 lbs
3040 kg |
2WD Clearance (front axle) | 19.9 inches
50 cm |
4WD Clearance (front axle) | 16 inches
40 cm |
Valmet 365 Height | |
|---|---|
Cab | 97.8 inches
248 cm |
2WD Exhaust | 103 inches
261 cm |
4WD Exhaust | 103.5 inches
262 cm |
Photos
Valmet 365 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Valmet 365 based on its 61 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 6 ft (72 in)1.8 m | Medium Duty | Medium pasture clearing; rear slip-clutch recommended. |
Rotary TillerSeedbed Prep | 66 to 72 in165 - 180 cm | Medium Duty | Standard utility tiller; slip clutch protection required. |
Disc HarrowSecondary Tillage | 7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙 | Medium Duty | Field leveling and clod breaking behind plows. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Valmet 365.
Estimated Continuous Field Runtime: 6.1 hrs
Approximately 6.1 hours of continuous field operation at ~75% rated power on a full tank (19.3 gal / 73.1 L).
Estimated 75% Load Fuel Burn~3.2 gal/hr (12 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Valmet 365 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Valmet 365.
Converted Equivalents:
Horsepower (HP)61 hp
Kilowatts (kW)45.5 kW
Metric Horsepower (PS / CV)61.8 PS
Direct Competitor Comparison
Compare Valmet 365 against same-era industry alternatives in the same horsepower class.
Current Model
Valmet
Valmet 365
Engine Power:Diesel (listed): 61 hp / 45.5 kW
★ Baseline Reference
Related models
Valmet 205
- Power:
- 49
- Production years:
- 1989 - 1991
Valmet 504
- Power:
- 49
- Production years:
- 1982 - 1985
Valmet 255
- Power:
- 53
- Production years:
- 1992 - 1994
Valmet 305
- Power:
- 53
- Production years:
- 1985 - 1991
Valmet 500
- Power:
- 54
- Production years:
- 1968 - 1971