Valmet 602 Turbo
The Valmet 602 Turbo is a tractor produced by Valmet. It is equipped with a 203 ci 3.3 L engine. The listed engine power is Diesel (listed): 64.4 hp / 48.0 kW. Transmission: 6 forward and 2 reverse. Operating weight: 6217 lbs 2820 kg.
Engine Power
Diesel (listed): 64.4 hp / 48.0 kW
Fuel & Capacities
17.2 gal
65.1 L
Transmission
6 forward and 2 reverse
Operating Weight
6217 lbs
2820 kg
Overview
 | 1980 - 1982
02 SeriesUtility tractor
02 Series
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Valmet |
Utility tractor | |
Valmet 602 Turbo Engine | |
|---|---|
Valmet 3.3L 3-cyl diesel | |
Engine details ...  |
Valmet 602 Turbo Transmission | |
|---|---|
6-speed synchronized | |
Transmission details ...  |
Valmet 602 Turbo Power | |
|---|---|
Engine | 64.4 hp
48.0 kW |
PTO (claimed) | 60.4 hp
45.0 kW |
Mechanical | |
|---|---|
Two-wheel drive | |
Power steering | |
Mechanical disc brakes | |
Cab standard with heater. |
Capacity | |
|---|---|
Fuel | 17.2 gal
65.1 L |
Hydraulic system | 5.3 gal
20.1 L |
Hydraulics | |
|---|---|
Capacity | 5.3 gal
20.1 L |
Pressure | 3045 psi
210.0 bar |
Valves | 1 to 3 |
Pump flow | 7.1 gpm
26.9 lpm |
Tractor hitch | |
|---|---|
Control | position and draft control |
Rear lift | 4189 lbs
1900 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540 (1.375) |
Engine RPM | 540@1720 |
Dimensions & Tires | |
|---|---|
Wheelbase | 83.2 inches
211 cm |
Weight | 6217 lbs
2820 kg |
Front tire | 7.50-16 |
Rear tire | 13.6-36 |
Full dimensions and tires ...  | |
References | |
|---|---|
 | |
Trendsetter published in 1980, by Valmet |
Engine
Engine Detail — 203 ci / 3.3 L Diesel
Manufacturer | Valmet 311 CS |
Configuration | turbocharged diesel, 3-cylinder, liquid-cooled |
Displacement | 203 ci
3.3 L |
Bore/Stroke | 4.25x4.72 inches
108 x 120 mm |
Power | 64.4 hp
48.0 kW |
Fuel system | direct injection |
Rated RPM | 2300 |
Torque | 173 lb-ft
234.6 Nm |
Torque RPM | 1450 |
Starter | electric |
Starter volts | 12 |
Oil capacity | 7.9 qts
7.5 L |
Coolant capacity | 10.6 qts
10.0 L |
Transmission
Transmission — 6 forward and 2 reverse synchronized
Type | synchronized |
Gears | 6 forward and 2 reverse |
Clutch | 280mm dry disc |
With 13.6-36 rear tires. | |
 | |
Dimensions
Valmet 602 Turbo Tires | |
|---|---|
Ag front | 7.50-16 |
Ag rear | 13.6-36 |
Dimensions | |
|---|---|
Wheelbase | 83.2 inches
211 cm |
Length | 136.2 inches
345 cm |
Height (cab) | 98.4 inches
249 cm |
Height (exhaust) | 103.2 inches
262 cm |
Weight | 6217 lbs
2820 kg |
Ground clearance | 17.7 inches
44 cm |
Recommended Implements & Sizing Guide
Engineering recommendations for Valmet 602 Turbo based on its 64.4 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 6 ft (72 in)1.8 m | Medium Duty | Medium pasture clearing; rear slip-clutch recommended. |
Rotary TillerSeedbed Prep | 66 to 72 in165 - 180 cm | Medium Duty | Standard utility tiller; slip clutch protection required. |
Disc HarrowSecondary Tillage | 7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙 | Medium Duty | Field leveling and clod breaking behind plows. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Valmet 602 Turbo.
Estimated Continuous Field Runtime: 5.1 hrs
Approximately 5.1 hours of continuous field operation at ~75% rated power on a full tank (17.2 gal / 65.1 L).
Estimated 75% Load Fuel Burn~3.3 gal/hr (12.7 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Valmet 602 Turbo Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Valmet 602 Turbo.
Converted Equivalents:
Horsepower (HP)64.4 hp
Kilowatts (kW)48 kW
Metric Horsepower (PS / CV)65.3 PS
Direct Competitor Comparison
Compare Valmet 602 Turbo against same-era industry alternatives in the same horsepower class.
Current Model
Valmet
Valmet 602 Turbo
Engine Power:Diesel (listed): 64.4 hp / 48.0 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 624
Engine Power:58
Production Years:1965 - 1972
Related models
Valmet 255
- Power:
- 53
- Production years:
- 1992 - 1994
Valmet 305
- Power:
- 53
- Production years:
- 1985 - 1991
Valmet 500
- Power:
- 54
- Production years:
- 1968 - 1971
Valmet 502
- Power:
- 54
- Production years:
- 1971 - 1982
Valmet 602
- Power:
- 57.7
- Production years:
- 1978 - 1982