Valmet 604
The Valmet 604 is a tractor produced by Valmet. It is equipped with a 201.4 ci 3.3 L engine. The listed engine power is Diesel (listed): 61 hp / 45.5 kW. Transmission: 6 forward and 2 reverse. Operating weight: 6173 to 6393 pounds.
Engine Power
Diesel (listed): 61 hp / 45.5 kW
Fuel & Capacities
17.2 gal
65.1 L
Transmission
6 forward and 2 reverse
Operating Weight
6173 to 6393 pounds
Overview
 | 1982 - 1985
04 SeriesUtility tractor
04 Series
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Valmet |
Utility tractor | |
Valmet 604 Engine | |
|---|---|
Valmet 3.3L 3-cyl diesel | |
Fuel tank | 17.2 gal
65.1 L |
Engine details ...  | |
Valmet 604 Transmission | |
|---|---|
6-speed partially synchronized | |
Transmission details ...  |
Valmet 604 Power | |
|---|---|
Engine | 61 hp
45.5 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Power steering | |
Cab standard. |
Hydraulics | |
|---|---|
Pump flow | 7.1 gpm
26.9 lpm |
10.2 gpm (optional)
38.6 lpm | |
Tractor hitch | |
|---|---|
Rear lift | 4,189 lbs
1900 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540 |
Dimensions & Tires | |
|---|---|
2WD Wheelbase | 83.2 inches
211 cm |
4WD Wheelbase | 85.8 inches
217 cm |
Weight | 6173 to 6393 pounds |
Front tire | 10.00-16 |
2WD Rear tire | 16.9-30 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 34 |
Charging volts | 13.5 |
Battery volts | 12 |
Battery AH | 130 |
References | |
|---|---|
 | |
Why not buy the best? published in 1985, by Valmet |
Engine
Engine Detail — 201.4 ci / 3.3 L Diesel
Manufacturer | Valmet T33C |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Displacement | 201.4 ci
3.3 L |
Bore/Stroke | 4.252x4.724 inches
108 x 120 mm |
Power | 61 hp
45.5 kW |
Rated RPM | 2300 |
Starter volts | 12 |
Oil capacity | 7.9 qts
7.5 L |
Coolant capacity | 10.6 qts
10.0 L |
Transmission
Transmission — 6 forward and 2 reverse partially synchronized
Type | partially synchronized |
Gears | 6 forward and 2 reverse |
Three gears (1-3) plus reverse (R) in two ranges (low/high). | |
With 13.6-36 rear tires. | |
 | |
Dimensions
Valmet 604 Tires | |
|---|---|
2WD Standard tires (ag) | Front: 10.00-16. Rear: 16.9-30 |
4WD Standard tires (ag) | Front: 11.2-24. Rear: 13.6-36 |
2WD Optional tires (ag) | Front: 10.00-16. Rear: 13.6-36 |
4WD Optional tires (ag) | Front: 11.2-24. Rear: 16.9-30 |
4WD Optional tires (ag) | Front: 10.5-18. Rear: 14.9-24 |
Dimensions | |
|---|---|
2WD Wheelbase | 83.2 inches
211 cm |
4WD Wheelbase | 85.8 inches
217 cm |
2WD Length | 142.4 inches
361 cm |
4WD Length | 146 inches
370 cm |
Width | 78.4 inches
199 cm |
Height | 100.2 inches
254 cm |
2WD Weight | 6173 lbs
2800 kg |
4WD Weight | 6393 lbs
2899 kg |
2WD Ground clearance | 18.5 inches
46 cm |
4WD Ground clearance | 15.8 inches
40 cm |
Photos
Valmet 604 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Valmet 604 based on its 61 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 6 ft (72 in)1.8 m | Medium Duty | Medium pasture clearing; rear slip-clutch recommended. |
Rotary TillerSeedbed Prep | 66 to 72 in165 - 180 cm | Medium Duty | Standard utility tiller; slip clutch protection required. |
Disc HarrowSecondary Tillage | 7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙 | Medium Duty | Field leveling and clod breaking behind plows. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Valmet 604.
Estimated Continuous Field Runtime: 5.4 hrs
Approximately 5.4 hours of continuous field operation at ~75% rated power on a full tank (17.2 gal / 65.1 L).
Estimated 75% Load Fuel Burn~3.2 gal/hr (12 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Valmet 604 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Valmet 604.
Converted Equivalents:
Horsepower (HP)61 hp
Kilowatts (kW)45.5 kW
Metric Horsepower (PS / CV)61.8 PS
Direct Competitor Comparison
Compare Valmet 604 against same-era industry alternatives in the same horsepower class.
Current Model
Valmet
Valmet 604
Engine Power:Diesel (listed): 61 hp / 45.5 kW
★ Baseline Reference
Related models
Valmet 205
- Power:
- 49
- Production years:
- 1989 - 1991
Valmet 504
- Power:
- 49
- Production years:
- 1982 - 1985
Valmet 255
- Power:
- 53
- Production years:
- 1992 - 1994
Valmet 305
- Power:
- 53
- Production years:
- 1985 - 1991
Valmet 500
- Power:
- 54
- Production years:
- 1968 - 1971