Valmet 6800
The Valmet 6800 is a tractor produced by Valmet. It is equipped with a 268.4 ci 4.4 L engine. The listed engine power is Diesel (listed): 114 hp / 85.0 kW. Transmission: Delta Powershift. Operating weight: 9722 lbs 4409 kg.
Engine Power
Diesel (listed): 114 hp / 85.0 kW
Fuel & Capacities
43.6 gal
165.0 L
Transmission
Delta Powershift
Operating Weight
9722 lbs
4409 kg
Overview
 | 1996 - 2001
Mezzo SeriesRow-Crop tractor
Mezzo Series
Row-Crop tractor |
|---|
Production | |
|---|---|
Manufacturer | Valmet |
Row-Crop tractor | |
Valmet 6800 Engine | |
|---|---|
SisuDiesel 4.4L 4-cyl diesel | |
Fuel tank | 43.6 gal
165.0 L |
Engine details ...  | |
Valmet 6800 Transmission | |
|---|---|
36-speed three-speed power shift | |
Transmission details ...  |
Valmet 6800 Power | |
|---|---|
Engine | 114 hp
85.0 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Power steering | |
Wet disc brakes | |
Cab standard with optional air-conditioning. |
Hydraulics | |
|---|---|
Pump flow | 19.3 gpm
73.1 lpm |
Tractor hitch | |
|---|---|
Rear Type | III/II |
Rear lift | 15430 lbs
6999 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/1000 |
Engine RPM | 540@1874 |
1000@2080 | |
Dimensions & Tires | |
|---|---|
Wheelbase | 91.6 inches
232 cm |
Weight | 9722 lbs
4409 kg |
Front tire | 13.6R24 |
Rear tire | 18.4R38 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Battery volts | 12 |
Engine
Engine Detail — 268.4 ci / 4.4 L Diesel
Manufacturer | SisuDiesel 420 DWI |
Configuration | turbocharged diesel, 4-cylinder, liquid-cooled |
Displacement | 268.4 ci
4.4 L |
Bore/Stroke | 4.252x4.724 inches
108 x 120 mm |
Power | 114 hp
85.0 kW |
Compression | 16.5:1 |
Rated RPM | 2225 |
Torque | 324.5 lb-ft
440.0 Nm |
Torque RPM | 1550 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — Delta Powershift
Transmission | Delta Powershift |
Type | three-speed power shift |
Gears | 36 forward and reverse |
Four gears in three ranges with three-speed power shift and shuttle. | |
With 18.4R38 rear tires. | |
 | |
Dimensions
Valmet 6800 Tires | |
|---|---|
Ag front | 13.6R24 |
Ag rear | 18.4R38 |
Dimensions | |
|---|---|
Wheelbase | 91.6 inches
232 cm |
Length | 174.2 inches
442 cm |
Width | 85.8 inches
217 cm |
Height | 109.1 inches
277 cm |
Weight | 9722 lbs
4409 kg |
Recommended Implements & Sizing Guide
Engineering recommendations for Valmet 6800 based on its 114 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Valmet 6800.
Estimated Continuous Field Runtime: 7.4 hrs
Approximately 7.4 hours of continuous field operation at ~75% rated power on a full tank (43.6 gal / 165 L).
Estimated 75% Load Fuel Burn~5.9 gal/hr (22.4 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Valmet 6800 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Valmet 6800.
Converted Equivalents:
Horsepower (HP)114 hp
Kilowatts (kW)85 kW
Metric Horsepower (PS / CV)115.6 PS
Direct Competitor Comparison
Compare Valmet 6800 against same-era industry alternatives in the same horsepower class.
Current Model
Valmet
Valmet 6800
Engine Power:Diesel (listed): 114 hp / 85.0 kW
★ Baseline Reference
Related models
Valmet 8000
- Power:
- 91.6
- Production years:
- 1991 - 1996
Valmet 6400
- Power:
- 93.8
- Production years:
- 1991 - 2003
Valmet 805
- Power:
- 95
- Production years:
- 1982 - 1991
Valmet 903
- Power:
- 95.2
- Production years:
- 1979 - 1983
Valmet 985
- Power:
- 97.8