Valmet 8750
The Valmet 8750 is a tractor produced by Valmet. It is equipped with a 449.6 ci 7.4 L engine. The listed engine power is Diesel (listed): 190 hp / 141.7 kW. Transmission: HiTech. Operating weight: 11490 lbs 5211 kg.
Engine Power
Diesel (listed): 190 hp / 141.7 kW
Fuel & Capacities
43.6 gal
165.0 L
Transmission
HiTech
Operating Weight
11490 lbs
5211 kg
Overview
 | 1995 - 2000
HiTech 8050 SeriesRow-Crop tractor
HiTech 8050 Series
Row-Crop tractor |
|---|
Production | |
|---|---|
Manufacturer | Valmet |
Row-Crop tractor | |
Built in Suolahti, Finland | |
Valmet 8750 Engine | |
|---|---|
SisuDiesel 7.4L 6-cyl diesel | |
Fuel tank | 43.6 gal
165.0 L |
Engine details ...  | |
Valmet 8750 Transmission | |
|---|---|
36-speed three-speed power shift | |
Transmission details ...  |
Valmet 8750 Power | |
|---|---|
Engine | 190 hp
141.7 kW |
PTO (claimed) | 172 hp
128.3 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Power steering | |
Hydraulic wet disc brakes | |
Cab standard. |
Hydraulics | |
|---|---|
Pressure | 2756 psi
190.0 bar |
Pump flow | 19.3 gpm
73.1 lpm |
Tractor hitch | |
|---|---|
Rear Type | III |
Rear lift | 15432 lbs
6999 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 100.7 inches
255 cm |
108.2 inchesOptOptional
274 cm | |
Weight | 11490 lbs
5211 kg |
Front tire | 16.8R28 |
Rear tire | 20.8R38 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Battery volts | 12 |
Engine
Engine Detail — 449.6 ci / 7.4 L Diesel
Manufacturer | SisuDiesel 634 DSRE |
Configuration | turbocharged diesel, 6-cylinder, liquid-cooled |
Displacement | 449.6 ci
7.4 L |
Bore/Stroke | 4.25x5.28 inches
108 x 134 mm |
Power | 190 hp
141.7 kW |
Rated RPM | 2200 |
Torque | 604.8 lb-ft
820.1 Nm |
Torque RPM | 1400 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — HiTech
Transmission | HiTech |
Type | three-speed power shift |
Gears | 36 forward and reverse |
Four gears in three ranges with three-speed power shift and power shuttle. | |
With 20.8R38 rear tires. | |
 | |
Dimensions
Valmet 8750 Tires | |
|---|---|
Ag front | 16.8R28 |
Ag rear | 20.8R38 |
Dimensions | |
|---|---|
Wheelbase | 100.7 inches
255 cm |
108.2 inchesOptOptional
274 cm | |
Length | 194.5 inches
494 cm |
Width | 88.2 inches
224 cm |
Height (cab) | 111.4 inches
282 cm |
Height (exhaust) | 111.8 inches
283 cm |
Weight | 11490 lbs
5211 kg |
Clearance (front axle) | 21.9 inches
55 cm |
Clearance (rear axle) | 21.1 inches
53 cm |
Photos
Valmet 8750 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Valmet 8750 based on its 190 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 5 to 7 Bottom (18")5 - 7 铧 (45 cm) | Commercial / Field Scale | Large acreage tillage; requires front ballast weights. |
Rotary Cutter / MowerMowing & Clearing | 15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼 | Commercial / Field Scale | Large commercial field and roadside mowing operations. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m) | Commercial / Field Scale | High-capacity commercial forage harvesting (1000 RPM PTO). |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Valmet 8750.
Estimated Continuous Field Runtime: 4.4 hrs
Approximately 4.4 hours of continuous field operation at ~75% rated power on a full tank (43.6 gal / 165 L).
Estimated 75% Load Fuel Burn~9.9 gal/hr (37.4 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Valmet 8750 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Valmet 8750.
Converted Equivalents:
Horsepower (HP)190 hp
Kilowatts (kW)141.7 kW
Metric Horsepower (PS / CV)192.6 PS
Direct Competitor Comparison
Compare Valmet 8750 against same-era industry alternatives in the same horsepower class.
Current Model
Valmet
Valmet 8750
Engine Power:Diesel (listed): 190 hp / 141.7 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 1568
Engine Power:172
Production Years:1974 - 1976
Related models
Valmet 8450
- Power:
- 158.2
- Production years:
- 1995 - 2001
Valmet 8550
- Power:
- 158.2
- Production years:
- 1995 - 2002
Valmet 2105
- Power:
- 163
- Production years:
- 1986 - 1987
Valmet 8600
- Power:
- 170
- Production years:
- 1989 - 1994
Valmet 8800
- Power:
- 190
- Production years:
- 1994 - 1996