Valmet 2105
The Valmet 2105 is a tractor produced by Valmet. It is equipped with a 334.4 ci 5.5 L engine. The listed engine power is Diesel (listed): 163 hp / 121.5 kW. Transmission: 16 forward and 4 reverse. Operating weight: 14,730 lbs 6681 kg.
Engine Power
Diesel (listed): 163 hp / 121.5 kW
Fuel & Capacities
55.48 gal
210.0 L
Transmission
16 forward and 4 reverse
Operating Weight
14,730 lbs
6681 kg
Overview
 | 1986 - 1987
Row-Crop tractor |
|---|
Production | |
|---|---|
Manufacturer | Valmet |
Row-Crop tractor | |
Valmet 2105 Engine | |
|---|---|
Volvo 5.5L 6-cyl diesel | |
Fuel tank | 55.48 gal
210.0 L |
Engine details ...  | |
Valmet 2105 Transmission | |
|---|---|
16-speed two-speed power shift | |
Transmission details ...  |
Valmet 2105 Power | |
|---|---|
Engine | 163 hp
121.5 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Power steering |
Hydraulics | |
|---|---|
Pump flow | 11.36 gpm
43.0 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Rear lift | 11020 lbs
4998 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Clutch | hydraulic dry disc |
Rear PTO Type | 540/1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 112 inches
284 cm |
Weight | 14,730 lbs
6681 kg |
Front tire | 16.9R28 |
Rear tire | 20.8R38 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 90 |
Charging volts | 14 |
Batteries | 2 |
Battery volts | 12 |
Engine
Engine Detail — 334.4 ci / 5.5 L Diesel
Manufacturer | Volvo TD60B |
Configuration | turbocharged diesel, 6-cylinder, liquid-cooled |
Displacement | 334.4 ci
5.5 L |
Bore/Stroke | 3.875x4.724 inches
98 x 120 mm |
Power | 163 hp
121.5 kW |
Compression | 16:1 |
Rated RPM | 2300 |
Starter volts | 12 |
Transmission
Transmission — 16 forward and 4 reverse two-speed power shift
Type | two-speed power shift |
Gears | 16 forward and 4 reverse |
Clutch | 355.6mm dry disc |
Four gears (1-4) plus reverse (R) in two ranges (low/high) with two-speed pushbutton power shift. | |
Dimensions
Valmet 2105 Tires | |
|---|---|
Ag front | 16.9R28 |
Ag rear | 20.8R38 |
Dimensions | |
|---|---|
Wheelbase | 112 inches
284 cm |
Length | 186.1 inches
472 cm |
Height (cab) | 120.5 inches
306 cm |
Height (exhaust) | 133.9 inches
340 cm |
Weight | 14,730 lbs
6681 kg |
Photos
Valmet 2105 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Valmet 2105 based on its 163 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 5 to 7 Bottom (18")5 - 7 铧 (45 cm) | Commercial / Field Scale | Large acreage tillage; requires front ballast weights. |
Rotary Cutter / MowerMowing & Clearing | 15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼 | Commercial / Field Scale | Large commercial field and roadside mowing operations. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m) | Commercial / Field Scale | High-capacity commercial forage harvesting (1000 RPM PTO). |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Valmet 2105.
Estimated Continuous Field Runtime: 6.5 hrs
Approximately 6.5 hours of continuous field operation at ~75% rated power on a full tank (55.5 gal / 210 L).
Estimated 75% Load Fuel Burn~8.5 gal/hr (32.1 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Valmet 2105 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Valmet 2105.
Converted Equivalents:
Horsepower (HP)163 hp
Kilowatts (kW)121.5 kW
Metric Horsepower (PS / CV)165.3 PS
Direct Competitor Comparison
Compare Valmet 2105 against same-era industry alternatives in the same horsepower class.
Current Model
Valmet
Valmet 2105
Engine Power:Diesel (listed): 163 hp / 121.5 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 1466
Engine Power:147.8
Production Years:1971 - 1976
Related models
Valmet 8350
- Power:
- 132.8
- Production years:
- 1998 - 2002
Valmet 1502
- Power:
- 136
- Production years:
- 1975 - 1980
Valmet 8400
- Power:
- 138.1
- Production years:
- 1993 - 2004
Valmet 2005
- Power:
- 140
- Production years:
- 1986 - 1987
Valmet 8300
- Power:
- 140
- Production years:
- 1989 - 1992