Valpadana 9565

The Valpadana 9565 is a tractor produced by Valpadana. It is equipped with a 166.7 ci 2.7 L engine. The listed engine power is Diesel (listed): 64.1 hp / 47.8 kW. Transmission: 36 forward and reverse. Drive type: 4x4 4WD. Operating weight: 4409 to 4630 pounds.

Engine Power
Diesel (listed): 64.1 hp / 47.8 kW
Drive & Traction
4x4 4WD
Fuel & Capacities
13.2 gal 50.0 L
Transmission
36 forward and reverse
Operating Weight
4409 to 4630 pounds

Overview

Valpadana 9565 tractor photo
1999 - 2001 9500 SeriesOrchard/Vineyard tractor 9500 Series Orchard/Vineyard tractor
Production
Manufacturer
Valpadana (a part of Argo)
Orchard/Vineyard tractor
Valpadana 9565 Engine
Deutz 2.7L 4-cyl diesel
Fuel tank
13.2 gal 50.0 L
Engine details ...
Valpadana 9565 Transmission
36-speed mechanical shuttle
Transmission details ...
Valpadana 9565 Power
Engine
64.1 hp 47.8 kW
Mechanical
Drive
4x4 4WD
Differential lock
electro-hydraulic front and rear
Power steering
Mechanical wet disc brakes
Two-post mid-mount folding ROPS or four-post ROPS. Reversible operator station.
Hydraulics
Valves
3
Total flow
13.2 gpm 50.0 lpm
Tractor hitch
Rear Type
II
Control
position control
Rear lift
3307 lbs 1500 kg
Power Take-off (PTO)
Rear PTO
independent
Rear PTO Type
540 (1.375)
Dimensions & Tires
Multitrac Wheelbase
60.2 inches 152 cm
Climber Wheelbase
62 inches 157 cm
Weight
4409 to 4630 pounds
Front tire
320/70-20
Multitrac Rear tire
320/70-20
Full dimensions and tires ...
Electrical
Ground
negative
Battery volts
12
References
9565 references literature
9565 - 9585 Multitrac/Climber published in 2000, by Valpadana

Engine

Engine Detail — 166.7 ci / 2.7 L Diesel

Manufacturer
Deutz
Fuel Type
Diesel
Configuration
4-cylinder, air-cooled
Displacement
166.7 ci 2.7 L
Bore/Stroke
3.58x4.13 inches 91 x 105 mm
Power
64.1 hp 47.8 kW
Compression
18.5:1
Rated RPM
2650
Starter
electric
Starter volts
12

Transmission

Transmission — 36 forward and reverse mechanical shuttle

Type
mechanical shuttle
Gears
36 forward and reverse
Clutch
250mm dry disc

Dimensions

Valpadana 9565 Tires
Multitrac Standard tires (ag)
Front: 320/70-20. Rear: 320/70-20
Climber Standard tires (ag)
Front: 31x15.50-15STG1. Rear: 31x15.50-15STG1
Optional tires (ag)
Front: 300/70-20. Rear: 300/70-20
Front: 360/70-20. Rear: 360/70-20
Front: 400/55-17.5T404. Rear:
Front: 400/55-22.5T404. Rear:
Front: 33x15.50-15T412. Rear:
Dimensions
Multitrac Wheelbase
60.2 inches 152 cm
Climber Wheelbase
62 inches 157 cm
Length
137.8 inches 350 cm
Multitrac Width
57.7 inches 146 cm
Climber Width
72.2 inches 183 cm
Height (ROPS)
83.3 inches (4-post) 211 cm
92.5 inches (2-post) 234 cm
Multitrac Weight
4630 lbs 2100 kg
Climber Weight
4409 lbs 1999 kg
Multitrac Front tread
45.3 to 52.6 inches 115 to 133 cm
Climber Front tread
56.7 inches 144 cm
Multitrac Rear tread
45.3 to 52.6 inches 115 to 133 cm
Climber Rear tread
56.7 inches 144 cm

Photos

Valpadana 9565 tractor photo

Valpadana 9565 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Valpadana 9565 based on its 64.1 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
3 to 4 Bottom (16")3 - 4 铧 (40 cm)Heavy DutySuitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing
6 ft (72 in)1.8 mMedium DutyMedium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep
66 to 72 in165 - 180 cmMedium DutyStandard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage
7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙Medium DutyField leveling and clod breaking behind plows.
Hay BalerHay & Forage
4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机Heavy DutySilage and dry hay; 540 RPM PTO with slip-clutch.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Valpadana 9565.

Estimated Continuous Field Runtime: 4 hrs

Approximately 4 hours of continuous field operation at ~75% rated power on a full tank (13.2 gal / 50 L).

Estimated 75% Load Fuel Burn~3.3 gal/hr (12.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Valpadana 9565 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Valpadana 9565.

Converted Equivalents:

Horsepower (HP)64.1 hp
Kilowatts (kW)47.8 kW
Metric Horsepower (PS / CV)65 PS

Direct Competitor Comparison

Compare Valpadana 9565 against same-era industry alternatives in the same horsepower class.

Current Model
Valpadana

Valpadana 9565

Engine Power:Diesel (listed): 64.1 hp / 47.8 kW
★ Baseline Reference
New HollandMarket Competitor

New Holland 3930

Engine Power:57.8
Production Years:1990 - 2002
International HarvesterMarket Competitor

International Harvester 544

Engine Power:57.8
Production Years:1968 - 1973
KubotaMarket Competitor

Kubota M5660SU

Engine Power:57.9
Production Years:2015 - 2025
Massey FergusonMarket Competitor

Massey Ferguson 363

Engine Power:58
Production Years:1987 - 1994