AGCO GT55

The AGCO GT55 is a tractor produced by Agco. It is equipped with a 183 ci 3.0 L engine. The listed engine power is Diesel (listed): 56 hp / 41.8 kW. Transmission: synchro-shuttle. Operating weight: 4982 to 6225 pounds.

Engine Power
Diesel (listed): 56 hp / 41.8 kW
Fuel & Capacities
23.7 gal 89.7 L
Transmission
synchro-shuttle
Operating Weight
4982 to 6225 pounds

Overview

AGCO GT55 tractor photo
2004 - 2007 GT SeriesUtility tractor GT Series Utility tractor
Production
Manufacturer
AGCO
Utility tractor
Built in Italy
AGCO GT55 Engine
SAME Deutz-Fahr 3.0L 3-cyl diesel
Fuel tank
23.7 gal 89.7 L
Engine details ...
AGCO GT55 Transmission
16-speed
Transmission details ...
AGCO GT55 Power
Engine
56 hp 41.8 kW
PTO (claimed)
53 hp 39.5 kW
PTO (tested)
58.89 hp 43.9 kW
Performance test details ...
Mechanical
Two- or four-wheel drive
Final drives
planetary
Differential lock
mechanical rear
Power steering
Wet disc brakes
Two-post folding ROPS. Cab optional with air-conditioning.
Hydraulics
Type
open center
Pump flow
14 gpm 53.0 lpm
Total flow
22.7 gpm 85.9 lpm
Tractor hitch
Rear Type
II
Rear lift (at 24"/610mm)
3520 lbs 1596 kg
Rear Arms
fixed
telescopic OptOptional
Power Take-off (PTO)
Rear PTO
independent
Clutch
electro-hydraulic
Rear PTO Type
540/1000 (1.375)
Engine RPM
540@1967
1000@2043
Dimensions & Tires
2WD Wheelbase
82.9 inches 210 cm
4WD Wheelbase
80.9 inches 205 cm
Weight
4982 to 6225 pounds
Full dimensions and tires ...
Electrical
Ground
negative
Charging system
alternator
Battery volts
12
References
GT55 references literature
GT Series - Rugged Comfort published in 2003, by AGCO
GT Series published in 2003, by AGCO
GT Series published in 2004, by AGCO

Engine

Engine Detail — 183 ci / 3.0 L Diesel

Manufacturer
SAME Deutz-Fahr
Configuration
turbocharged diesel, 3-cylinder, liquid-cooled
Displacement
183 ci 3.0 L
Bore/Stroke
4.134x4.547 inches 105 x 115 mm
Power
56 hp 41.8 kW
Air cleaner
dry element
Compression
16:1
Rated RPM
2200
Torque
185 lb-ft 250.9 Nm
Torque RPM
1349
Starter volts
12

Transmission

Transmission — synchro-shuttle

Transmission
synchro-shuttle
Gears
16 forward and 8 reverse
Clutch
dry disc

Dimensions

AGCO GT55 Tires
Dimensions
2WD Wheelbase
82.9 inches 210 cm
4WD Wheelbase
80.9 inches 205 cm
Length
145.7 inches 370 cm
Width
70.4 inches 178 cm
Height
104.6 inches 265 cm
2WD Front tread
54.6 to 66.4 inches 138 to 168 cm
4WD Front tread
57.5 to 69.1 inches 146 to 175 cm
Rear tread
55.1 to 74.8 inches 139 to 189 cm
AGCO GT55 Weight
2WD ROPS
4982 lbs 2259 kg
4WD ROPS
5467 lbs 2479 kg
2WD Cab
5511 lbs 2499 kg
4WD Cab
5996 lbs 2719 kg
Operating
6225 lbs*Four-wheel drive with cab. 2823 kg

Tests

Nebraska Tractor Test 1849
Diesel 16-speed 4WD May 17 - 26, 2005 Link: Nebraska Tractor Test 1849 file
PTO performance
Power at rated engine speed
58.89 hp 43.9 kW
Fuel use
4.0 gal/hour 15.1 l/hour
Power at rated PTO speed
57.80 hp 43.1 kW
Fuel use
3.8 gal/hour 14.4 l/hour

Photos

AGCO GT55 tractor photo

AGCO GT55 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Agco GT55 based on its 56 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
3 to 4 Bottom (16")3 - 4 铧 (40 cm)Heavy DutySuitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing
6 ft (72 in)1.8 mMedium DutyMedium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep
66 to 72 in165 - 180 cmMedium DutyStandard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage
7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙Medium DutyField leveling and clod breaking behind plows.
Hay BalerHay & Forage
Small Square Baler (14x18")小方捆打捆机 (36x46 cm)Medium DutyClassic 2-string baler for horse and small livestock hay.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Agco GT55.

Estimated Continuous Field Runtime: 8.1 hrs

Approximately 8.1 hours of continuous field operation at ~75% rated power on a full tank (23.7 gal / 89.7 L).

Estimated 75% Load Fuel Burn~2.9 gal/hr (11 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Agco GT55 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Agco GT55.

Converted Equivalents:

Horsepower (HP)56 hp
Kilowatts (kW)41.8 kW
Metric Horsepower (PS / CV)56.8 PS

Direct Competitor Comparison

Compare AGCO GT55 against same-era industry alternatives in the same horsepower class.

Current Model
Agco

AGCO GT55

Engine Power:Diesel (listed): 56 hp / 41.8 kW
★ Baseline Reference
DeereMarket Competitor

Deere 70

Engine Power:50.4
Production Years:1953 - 1956
KubotaMarket Competitor

Kubota M5040

Engine Power:50.5
Production Years:2007 - 2010
Deutz-FahrMarket Competitor

Deutz-Fahr D 5207

Engine Power:51
Production Years:1980 - 1984
FarmallMarket Competitor

Farmall A-514

Engine Power:50.5
Production Years:1962 - 1964
  • AGCO ST60A

    Power:
    46.4
    Production years:
    2007 - 2008
  • AGCO ST47A

    Power:
    47.5
    Production years:
    2005 - 2008
  • AGCO GT45

    Power:
    52
    Production years:
    2004 - 2007
  • AGCO ST52A

    Power:
    52.1
    Production years:
    2005 - 2008
  • AGCO ST55

    Power:
    55.6
    Production years:
    2003 - 2004