AGCO RT100A

The AGCO RT100A is a tractor produced by Agco. It is equipped with a 402 ci 6.6 L engine. The listed engine power is Diesel (listed): 128 hp / 95.4 kW. Transmission: QuadraShift. Operating weight: 15,100 lbs 6849 kg.

Engine Power
Diesel (listed): 128 hp / 95.4 kW
Fuel & Capacities
70 gal 264.9 L
Transmission
QuadraShift
Operating Weight
15,100 lbs 6849 kg

Overview

AGCO RT100A tractor photo
2006 - 2007 RT-A SeriesRow-Crop tractor RT-A Series Row-Crop tractor
Production
Manufacturer
AGCO
Row-Crop tractor
Built in Beauvais, France
AGCO RT100A Engine
Sisu 6.6L 6-cyl diesel
Fuel tank
70 gal 264.9 L
Engine details ...
AGCO RT100A Power
Engine
128 hp 95.4 kW
PTO (claimed)
100 hp 74.6 kW
Drawbar (tested)
89.72 hp 66.9 kW
PTO (tested)
117.73 hp 87.8 kW
Performance test details ...
Mechanical
Two- or four-wheel drive
Steering
hydrostatic power
Hydraulic wet disc brakes
Cab standard.
Hydraulics
Type
closed center PFC
Valves
3 or 4
Pump flow
29 gpm 109.8 lpm
Tractor hitch
Rear Type
II, IIIN
Rear lift
8,500 lbs 3855 kg
10,500 lbs 4762 kg
Power Take-off (PTO)
Rear PTO
independent
Rear PTO Type
540/1000
Dimensions & Tires
Wheelbase
109.5 inches 278 cm
Weight
15,100 lbs 6849 kg
Full dimensions and tires ...
Electrical
Ground
negative
Charging system
alternator
Charging amps
120
Batteries
2
Battery volts
12

Engine

Engine Detail — 402 ci / 6.6 L Diesel

Manufacturer
Sisu
Configuration
intercooled turbocharged diesel, 6-cylinder, liquid-cooled
Displacement
402 ci 6.6 L
Bore/Stroke
4.252x4.724 inches 108 x 120 mm
Power
128 hp 95.4 kW
Air cleaner
dual paper elements
Compression
18.5:1
Rated RPM
2200
Starter volts
12

Transmission

Transmission options
continuously variable transmission
32-speed partial power shift

Transmission — PowerMaxx CVT

Transmission
PowerMaxx CVT
Type
continuously variable transmission
Gears
infinite forward and reverse
RT100A PowerMaxx CVT continuously variable transmission speeds

Transmission — QuadraShift

Transmission
QuadraShift
Type
partial power shift
Gears
32 forward and reverse

Dimensions

AGCO RT100A Tires
Dimensions
Wheelbase
109.5 inches 278 cm
Operating weight
15,100 lbs 6849 kg
Front tread
61.2 to 89.1 inches 155 to 226 cm
Rear tread
63.5 to 110.4 inches 161 to 280 cm

Tests

OCED Tractor Test 569
Diesel CVT 4WD May 30 - June 1, 2007 Link: OCED Tractor Test 569 file
PTO performance
Max power
117.73 hp 87.8 kW
Fuel use
6.7 gal/hour 25.4 l/hour
Power at rated engine speed
107.77 hp 80.4 kW
Fuel use
7.1 gal/hour 26.9 l/hour
Power at rated PTO speed
116.14 hp 86.6 kW
Fuel use
6.9 gal/hour 26.1 l/hour
Drawbar performance
Max power
89.72 hp 66.9 kW
Fuel use
7.1 gal/hour 26.9 l/hour
Pull at 6.71 KPH
Max pull
15,145 lbs 6869 kg
Pull at 2.91 KPH

Photos

AGCO RT100A

AGCO RT100A

Recommended Implements & Sizing Guide

Engineering recommendations for Agco RT100A based on its 128 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)Heavy DutyHeavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing
10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼Heavy DutyWide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep
90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机Commercial / Field ScaleDeep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage
15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙Commercial / Field ScaleWide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage
5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机Heavy DutyHigh density baling; requires minimum 85 PTO HP.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Agco RT100A.

Estimated Continuous Field Runtime: 10.5 hrs

Approximately 10.5 hours of continuous field operation at ~75% rated power on a full tank (70 gal / 265 L).

Estimated 75% Load Fuel Burn~6.7 gal/hr (25.2 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Agco RT100A Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Agco RT100A.

Converted Equivalents:

Horsepower (HP)128 hp
Kilowatts (kW)95.4 kW
Metric Horsepower (PS / CV)129.8 PS

Direct Competitor Comparison

Compare AGCO RT100A against same-era industry alternatives in the same horsepower class.

Current Model
Agco

AGCO RT100A

Engine Power:Diesel (listed): 128 hp / 95.4 kW
★ Baseline Reference
FordMarket Competitor

Ford 8000

Engine Power:115.5
Production Years:1968 - 1972
International HarvesterMarket Competitor

International Harvester Hydro 186

Engine Power:115.6
Production Years:1976 - 1981
Massey FergusonMarket Competitor

Massey Ferguson 4370

Engine Power:116
Production Years:2001 - 2003
Deutz-FahrMarket Competitor

Deutz-Fahr Agrotron 115

Engine Power:116
Production Years:1998 - 2001
  • AGCO LT85A

    Power:
    105
    Production years:
    2008 - 2010
  • AGCO RT95

    Power:
    105.6
    Production years:
    2002 - 2004
  • AGCO LT90

    Power:
    110
    Production years:
    2004 - 2006
  • AGCO LT90A

    Power:
    110
    Production years:
    2006 - 2008
  • AGCO LT95A

    Power:
    115
    Production years:
    2008 - 2010