AGCO LT90
The AGCO LT90 is a tractor produced by Agco. It is equipped with a 269 ci 4.4 L engine. The listed engine power is Diesel (listed): 110 hp / 82.0 kW. Transmission: 16 forward and reverse. Operating weight: 8620 to 9500 pounds.
Engine Power
Diesel (listed): 110 hp / 82.0 kW
Fuel & Capacities
39 gal
147.6 L
Transmission
16 forward and reverse
Operating Weight
8620 to 9500 pounds
Overview
 | 2004 - 2006
LT SeriesUtility tractor
LT Series
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | AGCO |
Utility tractor | |
Built in Beauvais, France | |
AGCO LT90 Engine | |
|---|---|
Cummins 4.4L 4-cyl diesel | |
Fuel tank | 39 gal
147.6 L |
54 gal*With 57L optional tank.
204.4 L | |
Engine details ...  | |
AGCO LT90 Transmission | |
|---|---|
16-speed two-speed power shift | |
Transmission details ...  |
AGCO LT90 Power | |
|---|---|
Engine | 110 hp
82.0 kW |
PTO (claimed) | 85 hp
63.4 kW |
PTO (tested) | 87.70 hp
65.4 kW |
Performance test details ...  | |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Final drives | inboard planetary |
Wet disc brakes | |
Two-post ROPS. Cab optional with air-conditioning. | |
Hydraulics | |
|---|---|
Type | open center |
Valves | 2 or 4 |
Pump flow | 15 gpm
56.8 lpm |
26 gpmOptOptional
98.4 lpm | |
Tractor hitch | |
|---|---|
Rear Type | II |
Rear lift | 7710 lbs
3497 kg |
8885 lbsOptOptional
4030 kg | |
Rear Arms | telescopic link ends |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Clutch | electro-hydraulic |
Rear PTO Type | 540/1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 97 inches
246 cm |
Weight | 8620 to 9500 pounds |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Battery volts | 12 |
Engine
Engine Detail — 269 ci / 4.4 L Diesel
Manufacturer | Cummins |
Configuration | turbocharged diesel, 4-cylinder, liquid-cooled |
Displacement | 269 ci
4.4 L |
Bore/Stroke | 4.094x5.197 inches
104 x 132 mm |
Power | 110 hp
82.0 kW |
Compression | 17.5:1 |
Rated RPM | 2200 |
Torque | 322 lb-ft
436.6 Nm |
Torque RPM | 1251 |
Starter volts | 12 |
Transmission
Transmission — 16 forward and reverse two-speed power shift
Type | two-speed power shift |
Gears | 16 forward and reverse |
Clutch | electro-hydraulic wet disc |
 | |
Dimensions
AGCO LT90 Tires |
|---|
Dimensions | |
|---|---|
Wheelbase | 97 inches
246 cm |
Length | 165.5 inches
420 cm |
Height | 110 inches
279 cm |
AGCO LT90 Weight | |
|---|---|
2WD ROPS | 8620 lbs
3910 kg |
4WD ROPS | 9140 lbs
4145 kg |
2WD Cab | 8980 lbs
4073 kg |
4WD Cab | 9500 lbs
4309 kg |
Tests
Nebraska Tractor Test 1841 | |
|---|---|
Diesel 16-speed 4WD
October 13 - 22, 2004
Link: Nebraska Tractor Test 1841 file | |
PTO performance | |
Max power | 87.70 hp
65.4 kW |
Fuel use | 6.0 gal/hour
22.7 l/hour |
Power at rated PTO speed | 87.70 hp
65.4 kW |
Fuel use | 6.0 gal/hour
22.7 l/hour |
Photos
AGCO LT90 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Agco LT90 based on its 110 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Agco LT90.
Estimated Continuous Field Runtime: 6.8 hrs
Approximately 6.8 hours of continuous field operation at ~75% rated power on a full tank (39 gal / 147.6 L).
Estimated 75% Load Fuel Burn~5.7 gal/hr (21.7 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Agco LT90 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Agco LT90.
Converted Equivalents:
Horsepower (HP)110 hp
Kilowatts (kW)82 kW
Metric Horsepower (PS / CV)111.5 PS
Direct Competitor Comparison
Compare AGCO LT90 against same-era industry alternatives in the same horsepower class.
Current Model
Agco
AGCO LT90
Engine Power:Diesel (listed): 110 hp / 82.0 kW
★ Baseline Reference
Related models
AGCO LT85
- Power:
- 94.4
- Production years:
- 2002 - 2004
AGCO LT75
- Power:
- 100
- Production years:
- 2004 - 2006
AGCO LT75A
- Power:
- 100
- Production years:
- 2006 - 2008
AGCO LT85A
- Power:
- 105
- Production years:
- 2008 - 2010
AGCO RT95
- Power:
- 105.6
- Production years:
- 2002 - 2004