AGCO RT140A
The AGCO RT140A is a tractor produced by Agco. It is equipped with a 402.5 ci 6.6 L engine. The listed engine power is Diesel (listed): 170 hp / 126.8 kW. Transmission: PowerMaxx CVT. Operating weight: 14300 to 15100 pounds.
Engine Power
Diesel (listed): 170 hp / 126.8 kW
Fuel & Capacities
100 gal
378.5 L
Transmission
PowerMaxx CVT
Operating Weight
14300 to 15100 pounds
Overview
![]() | 2006 - 2011
RT-A SeriesRow-Crop tractor
RT-A Series
Row-Crop tractor |
|---|
Production | |
|---|---|
Manufacturer | AGCO |
Row-Crop tractor | |
Built in Beauvais, France | |
Original price | $93,670 (2009 Auto-6 2WD ) |
$102,895 ( Auto-6 4WD ) | |
$109,893 ( CVT 4WD ) | |
AGCO RT140A Engine | |
|---|---|
SisuDiesel 6.6L 6-cyl diesel | |
Fuel tank | 100 gal
378.5 L |
Engine details ... | |
AGCO RT140A Power | |
|---|---|
Engine | 170 hp
126.8 kW |
PTO (claimed) | 140 hp
104.4 kW |
Drawbar (tested) | 127.7 hp
95.2 kW |
PTO (tested) | 179.7 hp
134.0 kW |
Performance test details ... | |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Differential lock | front and rear |
Power steering | |
Hydraulic wet disc brakes | |
Cab standard. Optional Airmaxx pneumatic cab suspension and automatic climate control. | |
Hydraulics | |
|---|---|
Type | closed center pressure flow compensated (PFC) |
Pressure | 2900 psi
200.0 bar |
Valves | 3 to 5 |
Total flow | 29 gpm
109.8 lpm |
39 gpmOptOptional
147.6 lpm | |
Tractor hitch | |
|---|---|
Rear Type | 3/3N |
Control | electronic position and lower-link draft control |
Rear lift | 16,500 lbs
7484 kg |
CVT Rear lift | 16,140 lbs
7321 kg |
Front Hitch | optional |
Front lift | 8,800 lbs
3991 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/540E/1000 |
Front PTO | 2/3 OptOptional |
Front PTO Type | 1000 |
Dimensions & Tires | |
|---|---|
2WD Wheelbase | 118.6 inches
301 cm |
4WD Wheelbase | 117.9 inches
299 cm |
Weight | 14300 to 15100 pounds |
Front tire | 10.00x16 |
2WD Rear tire | 18.4R42 |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 120 |
150 OptOptional | |
Batteries | 2 |
Battery CCA | 550 |
Battery volts | 12 |
Engine
Engine Detail — 402.5 ci / 6.6 L Diesel
Manufacturer | SisuDiesel 66CTA |
Configuration | turbocharged intercooled diesel, 6-cylinder 24-valve, liquid-cooled |
Displacement | 402.5 ci
6.6 L |
Emissions | Tier III |
Power | 170 hp
126.8 kW |
Maximum Power | 200 hp
149.1 kW |
Fuel system | electronic common rail fuel injection |
Air cleaner | dry cartridge |
Pre-heating | grid heater |
Starter volts | 12 |
Transmission
Transmission options | |
|---|---|
32-speed partial power shift | |
24-speed partial power shift | |
continuously variable transmission |
Transmission — QuadraShift
Transmission | QuadraShift |
Type | partial power shift |
Gears | 32 forward and reverse |
Clutch | wet disc |
Six power shift gears in four synchromesh ranges. Autodrive provides automatic shifting to match load. | |
Transmission — Auto-6
Transmission | Auto-6 |
Type | partial power shift |
Gears | 24 forward and reverse |
Clutch | wet disc |
Six power shift gears in four synchromesh ranges. Autodrive provides automatic shifting to match load. | |
Transmission — PowerMaxx CVT
Transmission | PowerMaxx CVT |
Type | continuously variable transmission |
Gears | infinite forward and reverse (two-range) |
Combination hydrostatic-mechanical CVT transmission. With the suspended front axle a transport speed of 50 KPH is available. Creeper speed available down to 0.03 KPH. | |
![]() | |
Dimensions
AGCO RT140A Tires | |
|---|---|
2WD Standard tires (ag) | Front: 10.00x16. Rear: 18.4R42 |
4WD Standard tires (ag) | Front: 14.9R30. Rear: 18.4R42 |
Dimensions | |
|---|---|
2WD Wheelbase | 118.6 inches
301 cm |
4WD Wheelbase | 117.9 inches
299 cm |
4WD Length | 196 inches
497 cm |
4WD CVT Length | 187.8 inches
477 cm |
Width | 79.1 inches
200 cm |
Height (cab) | 119 inches
302 cm |
4WD Shipping weight | 14,300 lbs
6486 kg |
CVT Shipping weight | 15,100 lbs
6849 kg |
Bar rear axle | 3.74 by 91.9 inches
94 by 2334 mm |
Bar rear axle | 3.74 by 117.2 inches
94 by 2976 mm |
2WD Front tread | 64.1 to 79.9 inches
162 to 202 cm |
4WD Front tread | 60.9 to 88 inches
154 to 223 cm |
Rear tread | 67.6 to 120 inches
171 to 304 cm |
Tests
Tractor Tests | |
|---|---|
OECD 2200: diesel 32-speed 4WD | |
OECD 2197: diesel CVT 4WD | |
OECD 2395: diesel 24-speed 4WD | |
OECD 2420: diesel CVT 4WD |
OCED Tractor Test 2200 | |
|---|---|
Diesel 32-speed 4WD
March 2004 - June 2004,
Link: OCED Tractor Test 2200 file | |
PTO performance | |
Power at rated engine speed | 140.7 hp
104.9 kW |
Fuel use | 8.7 gal/hour
32.9 l/hour |
Power at rated PTO speed | 145.2 hp
108.3 kW |
Fuel use | 8.2 gal/hour
31.0 l/hour |
Drawbar performance | |
Max power | 121.5 hp
90.6 kW |
Fuel use | 8.6 gal/hour
32.6 l/hour |
Gear 4TA used for power test. | |
Max pull | 16,455 lbs
7463 kg |
Gear 1TD used for pull test. | |
OCED Tractor Test 2197 | |
|---|---|
Diesel CVT 4WD
December 2003 - May 2004,
Link: OCED Tractor Test 2197 file | |
PTO performance | |
Max power | 154.4 hp
115.1 kW |
Fuel use | 8.8 gal/hour
33.3 l/hour |
Power at rated engine speed | 143.2 hp
106.8 kW |
Fuel use | 9.4 gal/hour
35.6 l/hour |
Power at rated PTO speed | 153.1 hp
114.2 kW |
Fuel use | 9.1 gal/hour
34.4 l/hour |
Drawbar performance | |
Max power | 115.1 hp
85.8 kW |
Fuel use | 9.3 gal/hour
35.2 l/hour |
Pull at 7.70 KPH | |
Max pull | 16,690 lbs
7570 kg |
Pull at 3.85 KPH | |
OCED Tractor Test 2395 | |
|---|---|
Diesel 24-speed 4WD
August 2007 - October 2007,
Link: OCED Tractor Test 2395 file | |
PTO performance | |
Power at rated engine speed | 153.8 hp
114.7 kW |
Fuel use | 9.5 gal/hour
36.0 l/hour |
Power at rated PTO speed | 180.4 hp
134.5 kW |
Fuel use | 10.1 gal/hour
38.2 l/hour |
Drawbar performance | |
Max power | 127.7 hp
95.2 kW |
Fuel use | 8.9 gal/hour
33.7 l/hour |
Pull at 10.50 KPH | |
Max pull | 19,920 lbs
9035 kg |
Pull at 2.11 KPH | |
OCED Tractor Test 2420 | |
|---|---|
Diesel CVT 4WD
June 2007 - September 2007,
Link: OCED Tractor Test 2420 file | |
PTO performance | |
Max power | 179.7 hp
134.0 kW |
Fuel use | 9.7 gal/hour
36.7 l/hour |
Power at rated engine speed | 153.8 hp
114.7 kW |
Fuel use | 9.2 gal/hour
34.8 l/hour |
Power at rated PTO speed | 174.3 hp
130.0 kW |
Fuel use | 9.7 gal/hour
36.7 l/hour |
Drawbar performance | |
Max power | 111.4 hp
83.1 kW |
Fuel use | 8.4 gal/hour
31.8 l/hour |
Pull at 8.21 KPH | |
Max pull | 19,490 lbs
8840 kg |
Pull at 2.45 KPH | |
Photos
Recommended Implements & Sizing Guide
Engineering recommendations for Agco RT140A based on its 170 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 5 to 7 Bottom (18")5 - 7 铧 (45 cm) | Commercial / Field Scale | Large acreage tillage; requires front ballast weights. |
Rotary Cutter / MowerMowing & Clearing | 15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼 | Commercial / Field Scale | Large commercial field and roadside mowing operations. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m) | Commercial / Field Scale | High-capacity commercial forage harvesting (1000 RPM PTO). |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Agco RT140A.
Estimated Continuous Field Runtime: 11.3 hrs
Approximately 11.3 hours of continuous field operation at ~75% rated power on a full tank (100 gal / 378.5 L).
Estimated 75% Load Fuel Burn~8.8 gal/hr (33.5 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Agco RT140A Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Agco RT140A.
Converted Equivalents:
Horsepower (HP)170 hp
Kilowatts (kW)126.8 kW
Metric Horsepower (PS / CV)172.4 PS
Direct Competitor Comparison
Compare AGCO RT140A against same-era industry alternatives in the same horsepower class.
Current Model
Agco
AGCO RT140A
Engine Power:Diesel (listed): 170 hp / 126.8 kW
★ Baseline Reference
Related models
AGCO RT130
- Power:
- 144.4
- Production years:
- 2002 - 2004
AGCO RT120A
- Power:
- 145
- Production years:
- 2006 - 2011
AGCO RT120
- Power:
- 150
- Production years:
- 2004 - 2005
AGCO RT135
- Power:
- 150
- Production years:
- 2004 - 2005
AGCO RT145
- Power:
- 161.1
- Production years:
- 2002 - 2004


