AGCO RT155A
The AGCO RT155A is a tractor produced by Agco. It is equipped with a 402.5 ci 6.6 L engine. The listed engine power is Diesel (listed): 185 hp / 138.0 kW. Transmission: PowerMaxx CVT. Operating weight: 14300 to 15100 pounds.
Engine Power
Diesel (listed): 185 hp / 138.0 kW
Fuel & Capacities
100 gal
378.5 L
Transmission
PowerMaxx CVT
Operating Weight
14300 to 15100 pounds
Overview
![]() | 2006 - 2011
RT-A SeriesRow-Crop tractor
RT-A Series
Row-Crop tractor |
|---|
Production | |
|---|---|
Manufacturer | AGCO |
Row-Crop tractor | |
Built in Beauvais, France | |
Original price | $100,881 (2009 Auto-6 2WD ) |
$110,106 (2009 Auto-6 4WD ) | |
$117,104 (2009 CVT 4WD ) | |
The AGCO RT155A is similar to the Massey Ferguson 6495 and 7495. | |
AGCO RT155A Engine | |
|---|---|
SisuDiesel 6.6L 6-cyl diesel | |
Fuel tank | 100 gal
378.5 L |
Engine details ... | |
AGCO RT155A Power | |
|---|---|
Engine | 185 hp
138.0 kW |
PTO (claimed) | 155 hp
115.6 kW |
Drawbar (tested) | 136.0 hp
101.4 kW |
PTO (tested) | 190.0 hp
141.7 kW |
Performance test details ... | |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Differential lock | front and rear |
Steering | hydrostatic power |
Hydraulic wet disc brakes | |
Cab standard. Optional Airmaxx pneumatic cab suspension and automatic climate control. | |
Hydraulics | |
|---|---|
Type | closed center pressure flow compensated (PFC) |
Pressure | 2900 psi
200.0 bar |
Valves | 3 to 5 |
Total flow | 29 gpm
109.8 lpm |
39 gpmOptOptional
147.6 lpm | |
Tractor hitch | |
|---|---|
Rear Type | 3/3N |
Control | electronic position and lower-link draft control |
Rear lift (at 24"/610mm) | 16,500 lbs
7484 kg |
CVT Rear lift (at 24"/610mm) | 16,140 lbs
7321 kg |
Front Hitch | 2/3 OptOptional |
Front lift | 8,800 lbs
3991 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/540E/1000 |
Front PTO | optional |
Front PTO Type | 1000 |
Dimensions & Tires | |
|---|---|
2WD Wheelbase | 118.6 inches
301 cm |
4WD Wheelbase | 117.9 inches
299 cm |
Weight | 14300 to 15100 pounds |
Front tire | 10.00x16 |
Rear tire | 18.4R42 (2WD) |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 120 |
150 OptOptional | |
Batteries | 2 |
Battery CCA | 550 |
Battery volts | 12 |
Engine
Engine Detail — 402.5 ci / 6.6 L Diesel
Manufacturer | SisuDiesel 66CTA |
Configuration | turbocharged intercooled diesel, 6-cylinder 24-valve, liquid-cooled |
Displacement | 402.5 ci
6.6 L |
Bore/Stroke | 4.252x5.274 inches
108 x 134 mm |
Emissions | Tier III |
Power | 185 hp
138.0 kW |
Maximum Power | 210 hp
156.6 kW |
Fuel system | electronic common rail fuel injection |
Air cleaner | dry cartridge |
Pre-heating | grid heater |
Rated RPM | 2200 |
Starter volts | 12 |
Transmission
Transmission options | |
|---|---|
32-speed partial power shift | |
24-speed partial power shift | |
continuously variable transmission |
Transmission — QuadraShift
Transmission | QuadraShift |
Type | partial power shift |
Gears | 32 forward and reverse |
Clutch | wet disc |
Six power shift gears in four synchromesh ranges. Autodrive provides automatic shifting to match load. | |
Transmission — Auto-6
Transmission | Auto-6 |
Type | partial power shift |
Gears | 24 forward and reverse |
Clutch | wet disc |
Six power shift gears in four synchromesh ranges. Autodrive provides automatic shifting to match load. | |
Transmission — PowerMaxx CVT
Transmission | PowerMaxx CVT |
Type | continuously variable transmission |
Gears | infinite forward and reverse (two-range) |
Combination hydrostatic-mechanical CVT transmission. With the suspended front axle a transport speed of 50 KPH is available. Creeper speed available down to 0.03 KPH. | |
![]() | |
Dimensions
AGCO RT155A Tires | |
|---|---|
Standard tires (ag) | Front: 10.00x16. Rear: 18.4R42 (2WD) |
Front: 14.9R30. Rear: 18.4R42 (4WD) | |
Dimensions | |
|---|---|
2WD Wheelbase | 118.6 inches
301 cm |
4WD Wheelbase | 117.9 inches
299 cm |
4WD Length | 196 inches
497 cm |
4WD CVT Length | 187.8 inches
477 cm |
Width | 79.1 inches
200 cm |
Height (cab) | 119 inches
302 cm |
4WD Shipping weight | 14,300 lbs
6486 kg |
CVT Shipping weight | 15,100 lbs
6849 kg |
Bar rear axle | 3.74 by 91.9 inches
94 by 2334 mm |
Bar rear axle | 3.74 by 117.2 inches
94 by 2976 mm |
2WD Front tread | 64.1 to 79.9 inches
162 to 202 cm |
4WD Front tread | 60.9 to 88 inches
154 to 223 cm |
Rear tread | 67.6 to 120 inches
171 to 304 cm |
Tests
Tractor Tests | |
|---|---|
OECD 2202: diesel 32-speed 4WD | |
OECD 2198: diesel CVT 4WD | |
OECD 2517: diesel 24-speed 4WD | |
OECD 2421: diesel CVT 4WD |
OCED Tractor Test 2202 | |
|---|---|
Diesel 32-speed 4WD
March 2004 - June 2004,
Link: OCED Tractor Test 2202 file | |
PTO performance | |
Max power | 166.0 hp
123.8 kW |
Fuel use | 9.1 gal/hour
34.4 l/hour |
Power at rated engine speed | 156.1 hp
116.4 kW |
Fuel use | 9.6 gal/hour
36.3 l/hour |
Power at rated PTO speed | 165.2 hp
123.2 kW |
Fuel use | 9.2 gal/hour
34.8 l/hour |
Drawbar performance | |
Max power | 135.7 hp
101.2 kW |
Fuel use | 9.9 gal/hour
37.5 l/hour |
Gear 2LA used for power test. | |
Max pull | 16,150 lbs
7325 kg |
Gear 2TB used for pull test. | |
OCED Tractor Test 2198 | |
|---|---|
Diesel CVT 4WD
January 2004 - May 2004,
Link: OCED Tractor Test 2198 file | |
PTO performance | |
Max power | 168.6 hp
125.7 kW |
Fuel use | 9.5 gal/hour
36.0 l/hour |
Power at rated engine speed | 157.0 hp
117.1 kW |
Fuel use | 10.2 gal/hour
38.6 l/hour |
Power at rated PTO speed | 166.8 hp
124.4 kW |
Fuel use | 10.0 gal/hour
37.9 l/hour |
Drawbar performance | |
Max power | 125.1 hp
93.3 kW |
Fuel use | 10.1 gal/hour
38.2 l/hour |
Pull at 7.52 KPH | |
Max pull | 16,995 lbs
7708 kg |
Pull at 4.33 KPH | |
OCED Tractor Test 2517 | |
|---|---|
Diesel 24-speed 4WD
January 2009 - April 2009,
Link: OCED Tractor Test 2517 file | |
PTO performance | |
Power at rated engine speed | 165.8 hp
123.6 kW |
Fuel use | 10.1 gal/hour
38.2 l/hour |
Power at rated PTO speed | 196.3 hp
146.4 kW |
Fuel use | 10.5 gal/hour
39.7 l/hour |
Drawbar performance | |
Max power | 136.0 hp
101.4 kW |
Fuel use | 9.5 gal/hour
36.0 l/hour |
Gear 3A used for power test. | |
Max pull | 21,445 lbs
9727 kg |
Gear 1A used for pull test. | |
OCED Tractor Test 2421 | |
|---|---|
Diesel CVT 4WD
June 2007 - September 2007,
Link: OCED Tractor Test 2421 file | |
PTO performance | |
Max power | 190.0 hp
141.7 kW |
Fuel use | 10.3 gal/hour
39.0 l/hour |
Power at rated engine speed | 162.5 hp
121.2 kW |
Fuel use | 9.7 gal/hour
36.7 l/hour |
Power at rated PTO speed | 185.7 hp
138.5 kW |
Fuel use | 10.2 gal/hour
38.6 l/hour |
Drawbar performance | |
Max power | 118.9 hp
88.7 kW |
Fuel use | 9.3 gal/hour
35.2 l/hour |
Pull at 9.51 KPH | |
Max pull | 19,930 lbs
9040 kg |
Pull at 3.13 KPH | |
Photos
Recommended Implements & Sizing Guide
Engineering recommendations for Agco RT155A based on its 185 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 5 to 7 Bottom (18")5 - 7 铧 (45 cm) | Commercial / Field Scale | Large acreage tillage; requires front ballast weights. |
Rotary Cutter / MowerMowing & Clearing | 15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼 | Commercial / Field Scale | Large commercial field and roadside mowing operations. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m) | Commercial / Field Scale | High-capacity commercial forage harvesting (1000 RPM PTO). |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Agco RT155A.
Estimated Continuous Field Runtime: 10.4 hrs
Approximately 10.4 hours of continuous field operation at ~75% rated power on a full tank (100 gal / 378.5 L).
Estimated 75% Load Fuel Burn~9.6 gal/hr (36.4 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Agco RT155A Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Agco RT155A.
Converted Equivalents:
Horsepower (HP)185 hp
Kilowatts (kW)138 kW
Metric Horsepower (PS / CV)187.6 PS
Direct Competitor Comparison
Compare AGCO RT155A against same-era industry alternatives in the same horsepower class.
Current Model
Agco
AGCO RT155A
Engine Power:Diesel (listed): 185 hp / 138.0 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 4186
Engine Power:166.7
Production Years:1976 - 1978
Related models
AGCO RT120
- Power:
- 150
- Production years:
- 2004 - 2005
AGCO RT135
- Power:
- 150
- Production years:
- 2004 - 2005
AGCO RT145
- Power:
- 161.1
- Production years:
- 2002 - 2004
AGCO RT150
- Power:
- 166.7
- Production years:
- 2004 - 2005
AGCO RT140
- Power:
- 170
- Production years:
- 2005 - 2015


