AGCO Allis 9690
The AGCO Allis 9690 is a tractor produced by Agco Allis. It is equipped with a 584 ci 9.6 L engine. The listed engine power is 195.63 hp 145.9 kW. Transmission: 18 forward and 9 reverse. Operating weight: 18100 to 19405 pounds.
Engine Power
195.63 hp
145.9 kW
Fuel & Capacities
97 gal
367.1 L
Transmission
18 forward and 9 reverse
Operating Weight
19405 lbs
8802 kg
Overview
 | 1994 - 1995
9600 SeriesRow-Crop tractor
9600 Series
Row-Crop tractor |
|---|
Production | |
|---|---|
Manufacturer | AGCO Allis (a part of AGCO) |
Row-Crop tractor | |
Original price was $107,000 in 1995 | |
AGCO Allis 9690 Engine | |
|---|---|
Deutz 9.6L 6-cyl diesel | |
Fuel tank | 97 gal
367.1 L |
Engine details ...  | |
AGCO Allis 9690 Transmission | |
|---|---|
18-speed full power shift | |
Transmission details ...  |
AGCO Allis 9690 Power | |
|---|---|
PTO (claimed) | 195 hp
145.4 kW |
Drawbar (tested) | 170.56 hp
127.2 kW |
PTO (tested) | 205.49 hp
153.2 kW |
Performance test details ...  | |
Mechanical | |
|---|---|
Four-wheel drive | |
Final drives | inboard planetary |
Differential lock | electro-hydraulic rear |
Power steering | |
Hydraulic wet disc brakes | |
Cab standard with air-conditioning. | |
Hydraulics | |
|---|---|
Type | closed center pressure-compensating |
Pressure | 2500 psi
172.4 bar |
Rear valves | 3 or 4 |
Pump flow | 24 gpm*Advertised. Actual flow during testing was 21.8 GPM.
90.8 lpm |
Tractor hitch | |
|---|---|
Rear Type | III/II |
Control | lower-link draft sensing |
Rear lift (at 24"/610mm) | 9900 lbs*Advertised. Actual tested lift capacity was 8172 pounds.
4490 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Clutch | hydraulic wet disc |
Rear PTO Type | 1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 115 inches
292 cm |
Weight | 18100 to 19405 pounds |
Front tire | 16.9R28 |
Rear tire | 20.8R38 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 105 |
Batteries | 2 |
Battery CCA | 580 |
Battery volts | 12 |
References | |
|---|---|
 | |
9600/9800 Series Tractors published by AGCO | |
9600 Series published in 1991, by AGCO |
Engine
Engine Detail — 584 ci / 9.6 L Diesel
Manufacturer | Deutz BF6L513R |
Configuration | turbocharged diesel, 6-cylinder, air-cooled |
Displacement | 584 ci
9.6 L |
Bore/Stroke | 4.92x5.12 inches
125 x 130 mm |
Pre-heating | ether injection |
Compression | 15.8:1 |
Rated RPM | 2300 |
Starter volts | 12 |
Oil capacity | 24 qts
22.7 L |
Transmission
Transmission — 18 forward and 9 reverse full power shift
Type | full power shift |
Gears | 18 forward and 9 reverse |
Clutch | hydraulic wet disc |
 | |
Dimensions
AGCO Allis 9690 Tires | |
|---|---|
Standard tires (ag) | Front: 16.9R28. Rear: 20.8R38 |
Dimensions | |
|---|---|
Wheelbase | 115 inches
292 cm |
Length | 200 inches
508 cm |
Width | 96 inches
243 cm |
Height (cab) | 120.5 inches
306 cm |
Shipping weight | 18100 lbs
8210 kg |
Operating weight | 19405 lbs
8802 kg |
Clearance (front axle) | 22 inches
55 cm |
Clearance (drawbar) | 17 inches
43 cm |
Bar rear axle | 3.875 by 96 inches
98 by 2438 mm |
Bar rear axle | 3.875 by 115 inches
98 by 2921 mm |
Front tread | 61.2 to 87.2 inches
155 to 221 cm |
Rear tread | 64.1 to 107.1 inches
162 to 272 cm |
Rear tread | 64.1 to 126 inches
162 to 320 cm |
Tests
OCED Tractor Test 1684 | |
|---|---|
Diesel 18-speed 4WD
October 4 - 19, 1994
Link: OCED Tractor Test 1684 file | |
PTO performance | |
Max power | 205.49 hp
153.2 kW |
Fuel use | 12.0 gal/hour
45.4 l/hour |
Power at rated engine speed | 195.63 hp
145.9 kW |
Fuel use | 12.4 gal/hour
46.9 l/hour |
Power at rated PTO speed | 205.49 hp
153.2 kW |
Fuel use | 12.0 gal/hour
45.4 l/hour |
Drawbar performance | |
Max power | 170.56 hp
127.2 kW |
Fuel use | 12.5 gal/hour
47.3 l/hour |
Gear 7 used for power test. | |
Photos
AGCO Allis 9690 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Agco Allis 9690 based on its 195.63 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 5 to 7 Bottom (18")5 - 7 铧 (45 cm) | Commercial / Field Scale | Large acreage tillage; requires front ballast weights. |
Rotary Cutter / MowerMowing & Clearing | 15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼 | Commercial / Field Scale | Large commercial field and roadside mowing operations. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m) | Commercial / Field Scale | High-capacity commercial forage harvesting (1000 RPM PTO). |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Agco Allis 9690.
Estimated Continuous Field Runtime: 9.5 hrs
Approximately 9.5 hours of continuous field operation at ~75% rated power on a full tank (97 gal / 367.2 L).
Estimated 75% Load Fuel Burn~10.2 gal/hr (38.5 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Agco Allis 9690 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Agco Allis 9690.
Converted Equivalents:
Horsepower (HP)195.6 hp
Kilowatts (kW)145.9 kW
Metric Horsepower (PS / CV)198.3 PS
Direct Competitor Comparison
Compare AGCO Allis 9690 against same-era industry alternatives in the same horsepower class.
Current Model
Agco Allis
AGCO Allis 9690
Engine Power:195.63 hp
145.9 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 6588
Engine Power:177
Production Years:1981 - 1984
Related models
AGCO Allis 9745
- Power:
- 161.1
- Production years:
- 1998 - 2001
AGCO Allis 9150
- Power:
- 166.7
- Production years:
- 1991 - 1992
AGCO Allis 9455
- Power:
- 172.2
- Production years:
- 1994 - 1999
AGCO Allis 9650
- Power:
- 172.2
- Production years:
- 1994 - 1995
AGCO Allis 9655
- Power:
- 172.2
- Production years:
- 1994 - 1998