AGCO Allis 9650
The AGCO Allis 9650 is a tractor produced by Agco Allis. It is equipped with a 374 ci 6.1 L engine. The listed engine power is 155.93 hp 116.3 kW. Transmission: 18 forward and 9 reverse. Operating weight: 14800 to 17060 pounds.
Engine Power
155.93 hp
116.3 kW
Fuel & Capacities
67 gal
253.6 L
Transmission
18 forward and 9 reverse
Operating Weight
14800 to 17060 pounds
Overview
 | 1994 - 1995
9600 SeriesRow-Crop tractor
9600 Series
Row-Crop tractor |
|---|
Production | |
|---|---|
Manufacturer | AGCO Allis (a part of AGCO) |
Row-Crop tractor | |
Original price was $77,000 in 1995 | |
AGCO Allis 9650 Engine | |
|---|---|
Deutz 6.1L 6-cyl diesel | |
Fuel tank | 67 gal
253.6 L |
Engine details ...  | |
AGCO Allis 9650 Transmission | |
|---|---|
18-speed full power shift | |
Transmission details ...  |
AGCO Allis 9650 Power | |
|---|---|
PTO (claimed) | 155 hp
115.6 kW |
Drawbar (tested) | 138.03 hp
102.9 kW |
PTO (tested) | 159.30 hp
118.8 kW |
Performance test details ...  | |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Final drives | inboard planetary |
Differential lock | electro-hydraulic rear |
Power steering | |
Hydraulic wet disc brakes | |
Cab standard with air-conditioning. | |
Hydraulics | |
|---|---|
Type | closed center pressure-compensating |
Pressure | 2250 psi
155.1 bar |
Rear valves | 3 or 4 |
Pump flow | 24 gpm*Claimed. During testing, actual flow was 22.5 GPM.
90.8 lpm |
Tractor hitch | |
|---|---|
Rear Type | III/II |
Control | lower-link draft sensing |
Rear lift (at 24"/610mm) | 7212 lbs*During testing, actual lift was 5913 pounds.
3271 kg |
8544 lbs*Claimed lift with optional assist cylinder. During testing, actual lift was 6962 pounds.
3875 kg | |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Clutch | hydraulic wet disc |
Rear PTO Type | 540/1000 |
Dimensions & Tires | |
|---|---|
2WD Wheelbase | 124 inches
314 cm |
4WD Wheelbase | 116.5 inches
295 cm |
Weight | 14800 to 17060 pounds |
Front tire | 11.00-16 |
2WD Rear tire | 18.4R38 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 105 |
Batteries | 2 |
Battery CCA | 580 |
Battery volts | 12 |
References | |
|---|---|
 | |
9600/9800 Series Tractors published by AGCO | |
9600 Series published in 1991, by AGCO |
Engine
Engine Detail — 374 ci / 6.1 L Diesel
Manufacturer | Deutz BF6L913C |
Configuration | turbocharged intercooled diesel, 6-cylinder, air-cooled |
Displacement | 374 ci
6.1 L |
Bore/Stroke | 4.02x4.92 inches
102 x 125 mm |
Pre-heating | ether injection |
Compression | 15.5:1 |
Rated RPM | 2400 |
Starter volts | 12 |
Oil capacity | 17 qts
16.1 L |
Transmission
Transmission — 18 forward and 9 reverse full power shift
Type | full power shift |
Gears | 18 forward and 9 reverse |
Clutch | hydraulic wet disc |
 | |
Dimensions
AGCO Allis 9650 Tires | |
|---|---|
2WD Standard tires (ag) | Front: 11.00-16. Rear: 18.4R38 |
4WD Standard tires (ag) | Front: 14.9R28. Rear: 18.4R38 |
Dimensions | |
|---|---|
2WD Wheelbase | 124 inches
314 cm |
4WD Wheelbase | 116.5 inches
295 cm |
2WD Length | 187.5 inches
476 cm |
4WD Length | 196.5 inches
499 cm |
Width | 96 inches
243 cm |
Height (cab) | 119.7 inches
304 cm |
2WD Clearance (front axle) | 23 inches
58 cm |
4WD Clearance (front axle) | 22.3 inches
56 cm |
Clearance (drawbar) | 15.5 inches
39 cm |
Bar rear axle | 3.875 by 96 inches
98 by 2438 mm |
Bar rear axle | 3.875 by 115 inches
98 by 2921 mm |
2WD Front tread | 65 to 89 inches
165 to 226 cm |
4WD Front tread | 59.7 to 91.4 inches
151 to 232 cm |
Rear tread | 62 to 107.1 inches
157 to 272 cm |
Rear tread | 62 to 126 inches
157 to 320 cm |
AGCO Allis 9650 Weight | |
|---|---|
2WD Shipping | 14800 lbs
6713 kg |
4WD Shipping | 16100 lbs
7302 kg |
4WD Operating | 17060 lbs
7738 kg |
Tests
OCED Tractor Test 1675 | |
|---|---|
Diesel 18-speed 4WD
April 6 - 26, 1994
Link: OCED Tractor Test 1675 file | |
PTO performance | |
Max power | 159.30 hp
118.8 kW |
Fuel use | 9.3 gal/hour
35.2 l/hour |
Power at rated engine speed | 155.93 hp
116.3 kW |
Fuel use | 9.7 gal/hour
36.7 l/hour |
Power at rated PTO speed | 159.04 hp
118.6 kW |
Fuel use | 9.4 gal/hour
35.6 l/hour |
Drawbar performance | |
Max power | 138.03 hp
102.9 kW |
Fuel use | 9.6 gal/hour
36.3 l/hour |
Gear 7 used for power test. | |
Max pull | 20068 lbs
9102 kg |
Gear 4 used for pull test. | |
Photos
AGCO Allis 9650 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Agco Allis 9650 based on its 155.93 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 5 to 7 Bottom (18")5 - 7 铧 (45 cm) | Commercial / Field Scale | Large acreage tillage; requires front ballast weights. |
Rotary Cutter / MowerMowing & Clearing | 15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼 | Commercial / Field Scale | Large commercial field and roadside mowing operations. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m) | Commercial / Field Scale | High-capacity commercial forage harvesting (1000 RPM PTO). |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Agco Allis 9650.
Estimated Continuous Field Runtime: 8.3 hrs
Approximately 8.3 hours of continuous field operation at ~75% rated power on a full tank (67 gal / 253.6 L).
Estimated 75% Load Fuel Burn~8.1 gal/hr (30.7 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Agco Allis 9650 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Agco Allis 9650.
Converted Equivalents:
Horsepower (HP)155.9 hp
Kilowatts (kW)116.3 kW
Metric Horsepower (PS / CV)158.1 PS
Direct Competitor Comparison
Compare AGCO Allis 9650 against same-era industry alternatives in the same horsepower class.
Current Model
Agco Allis
AGCO Allis 9650
Engine Power:155.93 hp
116.3 kW
★ Baseline Reference
Related models
AGCO Allis 8630
- Power:
- 132.2
- Production years:
- 1991 - 1997
AGCO Allis 9735
- Power:
- 138.9
- Production years:
- 1998 - 2001
AGCO Allis 7650
- Power:
- 146.7
- Production years:
- 1991 - 1994
AGCO Allis 9130
- Power:
- 150
- Production years:
- 1991 - 1992
AGCO Allis 9435
- Power:
- 150
- Production years:
- 1994 - 1997