allis chalmers 190xt
 | 1964 - 1971
Row-Crop tractor | 1964 - 1971 | Row-Crop tractor |
|---|---|---|---|
1964 - 1971 | |||
Row-Crop tractor | |||
1964 - 1971 | |
|---|---|
Row-Crop tractor |
Production | |
|---|---|
Manufacturer | Allis Chalmers |
Row-Crop tractor | |
Built in West Allis, Wisconsin, USA | |
Total built | 22419 |
Original price | $8,672 |
Allis Chalmers 190XT Engines | |
|---|---|
Allis Chalmers 4.9L 6-cyl gasoline | |
Allis-Chalmers 4.9L 6-cyl diesel | |
Allis-Chalmers 4.9L 6-cyl LP gas | |
Engine details ...  |
Allis Chalmers 190XT Transmission | |
|---|---|
8-speed two-speed power shift | |
Transmission details ...  |
Allis Chalmers 190XT Power | |
|---|---|
Drawbar (tested) | 79.12 hp
59.0 kW |
PTO (tested) | 93.64 hp
69.8 kW |
Performance test details ...  | |
Mechanical | |
|---|---|
Two-wheel drive | |
Power steering | |
Band actuated disc brakes | |
Open operator station. Factory cab available starting in 1965 with optional heat and air-conditioning. |
Photos | |
|---|---|
 | |
Allis Chalmers 190XT photos...  |
Capacity | |
|---|---|
Fuel | 48 gal (gas/diesel)
181.7 L |
| 52 gal (LP gas)
196.8 L |
Hydraulic system | 9 gal
34.1 L |
Hydraulics | |
|---|---|
Type | open center |
Capacity | 9 gal
34.1 L |
Pressure | 2000 psi
137.9 bar |
Pump flow | 12 gpm
45.4 lpm |
Steering flow | 12 gpm
45.4 lpm |
Steering press. | 1500 psi
103.4 bar |
Tractor hitch | |
|---|---|
Rear Type | II |
Type | Allis Snap-Coupler |
Power Take-off (PTO) | |
|---|---|
Rear PTO | live *Continuous PTO, the tractor can be stopped via the Power Director clutch. |
| independent OptOptional |
Rear PTO Type | 540 (1.375) |
| 1000 (1.375) |
Engine RPM | 540@1940 |
| 1000@2136 |
Dimensions & Tires | |
|---|---|
Wheelbase | 105 inches
266 cm |
Weight | 7675 to 7945 pounds |
Front tire | 7.50-16 |
Rear tire | 16.4-34 |
Full dimensions and tires ...  | |
190XT Serial Number Location | |
|---|---|
 | |
Serial number on the left side of the tractor, stamped into the flange where the engine and transmission meet. |
190XT Serial Numbers | |
|---|---|
1964 | 1001 |
1965 | 2485 |
1966 | 8219 |
1967 | 13273 |
1967 | 19001 (Series II) |
1968 | 19262 |
1968 | 23001 (Series III) |
1969 | 23234 |
1970 | 25901 |
1971 | 29136 |
FAQ: How to read a serial number table. | |
Belt Pulley | |
|---|---|
Diameter | 9 inches
22 cm |
Width | 6.6 inches
16 cm |
RPM | 1845 |
Speed | 4347 ft/min
1324.97 meters/min |
Electrical | |
|---|---|
Ground | negative |
Charging system | generator |
Batteries | 1 (gas) |
| 2 (diesel) |
Battery volts | 6 (diesel) |
| 12 (gas/opt) |
Battery AH | 53 (gas) |
| 95 (gas optional) |
| 135 (diesel) |
| 190 (diesel optional) |
References | |
|---|---|
 | |
One-Ninety and One-Ninety XT Tractors published in 1967, by Allis Chalmers | |
One-Ninety and One-Ninety XT Series III Tractors published in 1969, by Allis Chalmers | |
It's here! New One-Ninety XT published in 1965, by Allis Chalmers | |
Allis-Chalmers Farm Equipment 1914-1985 by Norm Swinford | |
 | |
Operator's Manual One-Ninety and One-Ninety XT Tractors (TM-371A) published in 1964 | |
Operator's Manual One-Ninety and One-Ninety XT Tractors (TM-371A) published in 1970 | |
Operator's Manual One-Ninety and One-Ninety XT Series III Tractors (TM-513) published in 1971 |
Recommended Products
Advertisement · Featured Tractor-Related Products
Powtol AM125424 Oil Filter
3" O.D, 2-1/4" long, 3/4"-16 thread, 28 micron filter, 7 to 9 PSI relief, To ensure the optimal performance of your engine, please verify your engine's model and part numbers before ordering the parts.
John Deere Brake and Parts Cleaner
Brake and Parts Cleaner John Deere Brake and Parts Cleaner features a premium, VOC-compliant formula that outperforms the older chlorinated cleaners. It provides high-speed, deep-cleaning action without leaving a sticky residue.
Bright LED Bulbs Cool White compatible
HQRP® 2-Pack BA15S LED Bulbs Replacement; Bulb Type: BA15S Base (Single Contact); Working Voltage:12-24V DC; Lumen: 250-300; Way brighter than regular lights;
Tractor Backhoe Attachment with Mechanical Thumb
The MechMaxx BH660 backhoe is a reliable solution for a wide range of digging and excavation tasks. Designed to fit CAT I 3-point hitch tractors, it requires a minimum of 15 PTO horsepower and a tractor weight of at least 1,500 lbs. This backhoe is ideal for ditching on farms and grazing lands, digging pools, cleaning waterways, as well as assistant excavating work in construction and building roads.
* This page contains affiliate links, purchases may generate revenue for this site