Antonio Carraro Mach 2

The Antonio Carraro Mach 2 is a tractor produced by Antonio Carraro. It is equipped with a 202.5 ci 3.3 L engine. The listed engine power is Diesel (gross): 87 hp / 64.9 kW. Transmission: 16 forward and reverse. Operating weight: 6504 lbs (ROPS) 2950 kg.

Engine Power

Diesel (gross): 87 hp / 64.9 kW

Fuel & Capacities

15.9 gal (ROPS) 60.2 L

Transmission

16 forward and reverse

Operating Weight

6504 lbs (ROPS) 2950 kg

Overview

	Half-track Crawler tractor	Half-track Crawler tractor

Production
Manufacturer	Antonio Carraro
Half-track Crawler tractor
Built in Italy

Variants
Mach 2	articulated half-track
Mach 4	articulated crawler

Antonio Carraro Mach 2 Engine
Yanmar 3.3L 4-cyl diesel
Fuel tank	15.9 gal (ROPS) 60.2 L
	13.2 gal (Cab) 50.0 L
Engine details ...

Antonio Carraro Mach 2 Transmission
16-speed
Transmission details ...

Antonio Carraro Mach 2 Power
Engine (gross)	87 hp 64.9 kW

Mechanical
Four-wheel drive
Differential lock	electro-hydraulic rear
	electro-hydraulic front optional
Steering	hydraulic power
Hydraulic wet disc brakes
Two-post foldable ROPS. Optional StarLight cab with air-conditioning.

Tractor hitch
Rear Type	II
Rear lift	5071 lbs 2300 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	electro-hydraulic
Rear PTO Type	540/540E (1.375)
Front PTO	independent (optional)
Front PTO Type	1000

Dimensions & Tires
Wheelbase	57.7 inches 146 cm
Weight	6504 to 6834 pounds
Front tire	11.2R20
Rear tire	tracks
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

Engine

Engine Detail — 202.5 ci / 3.3 L Diesel

Manufacturer	Yanmar
Configuration	turbocharged intercooled diesel, 4-cylinder 16-valve, liquid-cooled
Displacement	202.5 ci 3.3 L
Bore/Stroke	3.86x4.33 inches 98 x 110 mm
Emissions	Stage 3A
Rated Power (gross)	87 hp 64.9 kW
Fuel system	direct injection
Rated RPM	2500
Torque	211.5 lb-ft 286.8 Nm
Torque RPM	1850
Starter	electric
Starter volts	12

Transmission

Transmission — 16 forward and reverse

Gears

16 forward and reverse

Dimensions

Antonio Carraro Mach 2 Tires
Ag front	11.2R20
Ag rear	tracks

Dimensions
Wheelbase	57.7 inches 146 cm
Length	139.8 inches 355 cm
Width	58.1 inches 147 cm
Height (ROPS)	95.3 inches 242 cm
Height (cab)	86.4 inches 219 cm
Weight	6504 lbs (ROPS) 2950 kg
	6834 lbs (Cab) 3099 kg
Ground clearance	13.2 inches 33 cm

Photos

Antonio Carraro Mach 2 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Antonio Carraro Mach 2 based on its 87 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Antonio Carraro Mach 2.

Estimated Continuous Field Runtime: 3.5 hrs

Approximately 3.5 hours of continuous field operation at ~75% rated power on a full tank (15.9 gal / 60.2 L).

Estimated 75% Load Fuel Burn~4.5 gal/hr (17.1 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours