Antonio Carraro SX 9400S

The Antonio Carraro SX 9400S is a tractor produced by Antonio Carraro. It is equipped with a 181.2 ci 3.0 L engine. The listed engine power is Diesel (gross): 87 hp / 64.9 kW. Transmission: 16 forward and reverse. Operating weight: 4707 lbs (ROPS) 2135 kg.

Engine Power
Diesel (gross): 87 hp / 64.9 kW
Fuel & Capacities
13.2 gal 50.0 L
Transmission
16 forward and reverse
Operating Weight
4707 lbs (ROPS) 2135 kg

Overview

Antonio Carraro SX 9400S tractor photo
Utility tractor
Utility tractor
Production
Manufacturer
Antonio Carraro
Utility tractor
Built in Italy
Antonio Carraro SX 9400S Engine
VM Motori 3.0L 4-cyl diesel
Fuel tank
13.2 gal 50.0 L
Engine details ...
Antonio Carraro SX 9400S Transmission
16-speed
Transmission details ...
Antonio Carraro SX 9400S Power
Engine (gross)
87 hp 64.9 kW
Mechanical
Four-wheel drive
Steering
hydraulic power
Hydraulic wet disc brakes
Two-post foldable ROPS. Optional StarLight cab with air-conditioning.
Tractor hitch
Rear Type
II/I
Rear lift
5335 lbs 2419 kg
Power Take-off (PTO)
Rear PTO
independent
Rear PTO Type
540/540E (1.375)
Dimensions & Tires
Wheelbase
61.8 inches 156 cm
Weight
4707 to 4905 pounds
Front tire
9.5R20
Rear tire
9.5R20
Full dimensions and tires ...
Electrical
Ground
negative
Battery volts
12

Engine

Engine Detail — 181.2 ci / 3.0 L Diesel

Manufacturer
VM Motori D754
Configuration
turbocharged diesel, 4-cylinder, liquid-cooled
Displacement
181.2 ci 3.0 L
Bore/Stroke
3.70x4.213 inches 94 x 107 mm
Emissions
Stage 3A
Rated Power (gross)
87 hp 64.9 kW
Fuel system
direct injection
Rated RPM
2600
Torque
280.3 lb-ft 380.1 Nm
Torque RPM
1000
Firing order
1-3-4-2
Starter
electric
Starter volts
12

Transmission

Transmission — 16 forward and reverse

Gears
16 forward and reverse

Dimensions

Antonio Carraro SX 9400S Tires
Ag front
9.5R20
300/70R20
280/85R20
320/70R20
340/65R18
Ag rear
9.5R20
300/70R20
280/85R20
320/70R20
340/65R18
Dimensions
Wheelbase
61.8 inches 156 cm
Length
136.4 inches 346 cm
Width
41.7 inches (min) 105 cm
Height (ROPS)
93.1 inches 236 cm
Height (cab)
90.4 inches 229 cm
Weight
4707 lbs (ROPS) 2135 kg
4905 lbs (Cab) 2224 kg

Photos

Antonio Carraro SX 9400S tractor photo

Antonio Carraro SX 9400S tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Antonio Carraro SX 9400S based on its 87 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
3 to 4 Bottom (16")3 - 4 铧 (40 cm)Heavy DutySuitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing
7 to 8 ft (84-96 in)2.1 - 2.4 mHeavy DutyHeavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep
78 to 84 in200 - 215 cmHeavy DutyHeavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage
10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙Heavy DutyAggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage
4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机Heavy DutySilage and dry hay; 540 RPM PTO with slip-clutch.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Antonio Carraro SX 9400S.

Estimated Continuous Field Runtime: 2.9 hrs

Approximately 2.9 hours of continuous field operation at ~75% rated power on a full tank (13.2 gal / 50 L).

Estimated 75% Load Fuel Burn~4.5 gal/hr (17.1 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Antonio Carraro SX 9400S Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Antonio Carraro SX 9400S.

Converted Equivalents:

Horsepower (HP)87 hp
Kilowatts (kW)64.9 kW
Metric Horsepower (PS / CV)88.2 PS

Direct Competitor Comparison

Compare Antonio Carraro SX 9400S against same-era industry alternatives in the same horsepower class.

Current Model
Antonio Carraro

Antonio Carraro SX 9400S

Engine Power:Diesel (gross): 87 hp / 64.9 kW
★ Baseline Reference
FordMarket Competitor

Ford 6710

Engine Power:78.5
Production Years:1982 - 1987
DeereMarket Competitor

Deere 3330

Engine Power:78.6
Production Years:1977 - 1980
New HollandMarket Competitor

New Holland 5640

Engine Power:78.7
Production Years:1996 - 1998
Deutz-FahrMarket Competitor

Deutz-Fahr 4080.4E

Engine Power:78.9
Production Years:2018 - 2026