Antonio Carraro TRH 9800

The Antonio Carraro TRH 9800 is a tractor produced by Antonio Carraro. It is equipped with a 202.5 ci 3.3 L engine. The listed engine power is Diesel (gross): 87 hp / 64.9 kW. Transmission: infinite forward and reverse (4-range). Operating weight: 5104 to 5456 pounds.

Engine Power
Diesel (gross): 87 hp / 64.9 kW
Fuel & Capacities
15.9 gal 60.2 L
Transmission
infinite forward and reverse (4-range)
Operating Weight
5104 to 5456 pounds

Overview

Antonio Carraro TRH 9800 tractor photo
Ergit 100 SeriesUtility tractor
Ergit 100 Series
Utility tractor
Production
Manufacturer
Antonio Carraro
Utility tractor
Built in Italy
Antonio Carraro TRH 9800 Engine
Yanmar 3.3L 4-cyl diesel
Fuel tank
15.9 gal 60.2 L
Engine details ...
Antonio Carraro TRH 9800 Transmission
hydrostatic
Transmission details ...
Antonio Carraro TRH 9800 Power
Engine (gross)
87 hp 64.9 kW
Mechanical
Four-wheel drive
Steering
hydraulic power
Hydraulic wet disc brakes
Two-post foldable ROPS. Optional six-post ROPS canopy frame with windscreen. Optional StarLight cab with air-conditioning.
Tractor hitch
Rear Type
II
Rear lift
5291 lbs 2399 kg
Power Take-off (PTO)
Rear PTO
independent
Rear PTO Type
540/540E (1.375)
Dimensions & Tires
Wheelbase
59.2 inches 150 cm
Weight
5104 to 5456 pounds
Front tire
250/80R18
Rear tire
250/80R18
Full dimensions and tires ...
Electrical
Ground
negative
Battery volts
12

Engine

Engine Detail — 202.5 ci / 3.3 L Diesel

Manufacturer
Yanmar
Configuration
turbocharged diesel, 4-cylinder 16-valve, liquid-cooled
Displacement
202.5 ci 3.3 L
Bore/Stroke
3.86x4.33 inches 98 x 110 mm
Emissions
Stage 3A
Rated Power (gross)
87 hp 64.9 kW
Fuel system
direct injection
Rated RPM
2500
Torque
211.5 lb-ft 286.8 Nm
Torque RPM
1850
Starter
electric
Starter volts
12

Transmission

Transmission — infinite forward and reverse (4-range) hydrostatic

Type
hydrostatic
Gears
infinite forward and reverse (4-range)

Dimensions

Antonio Carraro TRH 9800 Tires
Ag front
250/80R18
280/70R18
9.5R20
300/70R20
320/70R20
300/80-15.3
320/65R18
280/85R20
Ag rear
250/80R18
280/70R18
9.5R20
300/70R20
320/70R20
300/80-15.3
320/65R18
280/85R20
Lawn/turf front
31x15.50-15
Lawn/turf rear
31x15.50-15
Dimensions
Wheelbase
59.2 inches 150 cm
Length
138 inches 350 cm
Width
54.3 inches (min) 137 cm
Antonio Carraro TRH 9800 Weight
5104 lbs (ROPS) 2315 kg
5258 lbs (frame) 2385 kg
5456 lbs (cab) 2474 kg
Antonio Carraro TRH 9800 Height
ROPS
91.3 inches 231 cm
Cab
81.3 inches 206 cm
84 inches (StarLight) 213 cm

Photos

Antonio Carraro TRH 9800 tractor photo

Antonio Carraro TRH 9800 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Antonio Carraro TRH 9800 based on its 87 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
3 to 4 Bottom (16")3 - 4 铧 (40 cm)Heavy DutySuitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing
7 to 8 ft (84-96 in)2.1 - 2.4 mHeavy DutyHeavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep
78 to 84 in200 - 215 cmHeavy DutyHeavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage
10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙Heavy DutyAggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage
4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机Heavy DutySilage and dry hay; 540 RPM PTO with slip-clutch.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Antonio Carraro TRH 9800.

Estimated Continuous Field Runtime: 3.5 hrs

Approximately 3.5 hours of continuous field operation at ~75% rated power on a full tank (15.9 gal / 60.2 L).

Estimated 75% Load Fuel Burn~4.5 gal/hr (17.1 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Antonio Carraro TRH 9800 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Antonio Carraro TRH 9800.

Converted Equivalents:

Horsepower (HP)87 hp
Kilowatts (kW)64.9 kW
Metric Horsepower (PS / CV)88.2 PS

Direct Competitor Comparison

Compare Antonio Carraro TRH 9800 against same-era industry alternatives in the same horsepower class.

Current Model
Antonio Carraro

Antonio Carraro TRH 9800

Engine Power:Diesel (gross): 87 hp / 64.9 kW
★ Baseline Reference
FordMarket Competitor

Ford 6710

Engine Power:78.5
Production Years:1982 - 1987
DeereMarket Competitor

Deere 3330

Engine Power:78.6
Production Years:1977 - 1980
New HollandMarket Competitor

New Holland 5640

Engine Power:78.7
Production Years:1996 - 1998
Deutz-FahrMarket Competitor

Deutz-Fahr 4080.4E

Engine Power:78.9
Production Years:2018 - 2026