Antonio Carraro TTR 9800

The Antonio Carraro TTR 9800 is a tractor produced by Antonio Carraro. It is equipped with a 202.5 ci 3.3 L engine. The listed engine power is Diesel (gross): 87 hp / 64.9 kW. Transmission: 32 forward and reverse. Operating weight: 5159 lbs (ROPS) 2340 kg.

Engine Power

Diesel (gross): 87 hp / 64.9 kW

Fuel & Capacities

15.9 gal 60.2 L

Transmission

32 forward and reverse

Operating Weight

5159 lbs (ROPS) 2340 kg

Overview

	Ergit 100 SeriesUtility tractor
Ergit 100 Series
Utility tractor

Production
Manufacturer	Antonio Carraro
Utility tractor
Built in Italy

Antonio Carraro TTR 9800 Engine
Yanmar 3.3L 4-cyl diesel
Fuel tank	15.9 gal 60.2 L
Engine details ...

Antonio Carraro TTR 9800 Power
Engine (gross)	87 hp 64.9 kW

Mechanical
Four-wheel drive
Steering	hydraulic power
Hydraulic wet disc brakes
Six-post ROPS canopy with windscreen. Optional cab with air-conditioning.

Tractor hitch
Rear Type	II
Rear lift	5291 lbs 2399 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/540E (1.375)
Front PTO	independent (optional)
Front PTO Type	1000

Dimensions & Tires
Wheelbase	60.2 inches 152 cm
Weight	5159 to 5445 pounds
Front tire	31x15.50-15
Rear tire	31x15.50-15
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

Engine

Engine Detail — 202.5 ci / 3.3 L Diesel

Manufacturer	Yanmar
Configuration	turbocharged diesel, 4-cylinder 16-valve, liquid-cooled
Displacement	202.5 ci 3.3 L
Bore/Stroke	3.86x4.33 inches 98 x 110 mm
Emissions	Stage 3A
Rated Power (gross)	87 hp 64.9 kW
Fuel system	direct injection
Rated RPM	2500
Torque	211.5 lb-ft 286.8 Nm
Torque RPM	1850
Starter	electric
Starter volts	12

Transmission

Transmission options
16-speed
32-speed

Transmission — 16 forward and reverse

Gears

16 forward and reverse

Transmission — 32 forward and reverse

Gears

32 forward and reverse

Dimensions

Antonio Carraro TTR 9800 Tires
Ag front	31x15.50-15
	300/80-15.3
	340/65R18
	425/55R17
Ag rear	31x15.50-15
	300/80-15.3
	340/65R18
	425/55R17
Lawn/turf front	31x15.50-15
Lawn/turf rear	31x15.50-15

Dimensions
Wheelbase	60.2 inches 152 cm
Length	137.8 inches 350 cm
Width	51.6 inches (min) 131 cm
Height (cab)	87.2 inches 221 cm
Weight	5159 lbs (ROPS) 2340 kg
	5445 lbs (Cab) 2469 kg

Photos

Antonio Carraro TTR 9800 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Antonio Carraro TTR 9800 based on its 87 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Antonio Carraro TTR 9800.

Estimated Continuous Field Runtime: 3.5 hrs

Approximately 3.5 hours of continuous field operation at ~75% rated power on a full tank (15.9 gal / 60.2 L).

Estimated 75% Load Fuel Burn~4.5 gal/hr (17.1 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours