Belarus MTZ-82
The Belarus MTZ-82 is a tractor produced by Belarus. It is equipped with a 289.8 ci 4.7 L engine. The listed engine power is Diesel (listed): 80 hp / 59.7 kW. Transmission: 18 forward and 4 reverse. Operating weight: 8,423 lbs 3820 kg.
Engine Power
Diesel (listed): 80 hp / 59.7 kW
Fuel & Capacities
34.3 gal
129.8 L
Transmission
18 forward and 4 reverse
Operating Weight
8,423 lbs
3820 kg
Overview
 | 1975 - 1977
Row-Crop tractor |
|---|
Production | |
|---|---|
Manufacturer | Belarus |
Row-Crop tractor | |
Built in Minsk, Belarus | |
Variants | |
|---|---|
MTZ-80 | 2WD |
MTZ-82 | 4WD |
Belarus MTZ-82 Engine | |
|---|---|
MTZ 4.7L 4-cyl diesel | |
Engine details ...  |
Belarus MTZ-82 Transmission | |
|---|---|
18-speed | |
Transmission details ...  |
Belarus MTZ-82 Power | |
|---|---|
Engine | 80 hp
59.7 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Steering | power assist |
Disc brakes | |
Cab standard. | |
Capacity | |
|---|---|
Fuel | 34.3 gal
129.8 L |
Hydraulic system | 5.6 gal
21.2 L |
Hydraulics | |
|---|---|
Capacity | 5.6 gal
21.2 L |
Pressure | 2321 psi
160.0 bar |
Total flow | 13.2 gpm
50.0 lpm |
Tractor hitch | |
|---|---|
Rear lift | 4,410 lbs
2000 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540/1000/ground |
Dimensions & Tires | |
|---|---|
Wheelbase | 96.5 inches
245 cm |
Weight | 8,423 lbs
3820 kg |
Front tire | 8.30-20 |
Rear tire | 15.5-38 |
Full dimensions and tires ...  | |
References | |
|---|---|
 | |
Traktor-program published in 1979, by Belarus | |
Z200 Series published in 2019, by Kubota |
Engine
Engine Detail — 289.8 ci / 4.7 L Diesel
Manufacturer | MTZ D240 |
Fuel Type | Diesel |
Configuration | 4-cylinder, liquid-cooled |
Displacement | 289.8 ci
4.7 L |
Bore/Stroke | 4.331x4.921 inches
110 x 125 mm |
Power | 80 hp
59.7 kW |
Air cleaner | oil bath |
Compression | 16:1 |
Rated RPM | 2200 |
Torque | 202.8 lb-ft
275.0 Nm |
Torque RPM | 1400 |
Starter volts | 12 |
Belarus MTZ-82 Engine | |
|---|---|
 | |
Image courtesy of Rolf Ove Rostad |
Transmission
Transmission — 18 forward and 4 reverse
Gears | 18 forward and 4 reverse |
Dimensions
Belarus MTZ-82 Tires | |
|---|---|
Ag front | 8.30-20 |
Ag rear | 15.5-38 |
Dimensions | |
|---|---|
Wheelbase | 96.5 inches
245 cm |
Length | 154.7 inches
392 cm |
Width | 77.6 inches
197 cm |
Height | 97.2 inches
246 cm |
Weight | 8,423 lbs
3820 kg |
Ground clearance | 18.3 inches
46 cm |
Front tread | 47.2 to 70.9 inches
119 to 180 cm |
Rear tread | 53.2 to 82.9 inches
135 to 210 cm |
Photos
MTZ 82.
Recommended Implements & Sizing Guide
Engineering recommendations for Belarus MTZ-82 based on its 80 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 7 to 8 ft (84-96 in)2.1 - 2.4 m | Heavy Duty | Heavy-duty twin spindle cutter for overgrown acreage. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Belarus MTZ-82.
Estimated Continuous Field Runtime: 8.2 hrs
Approximately 8.2 hours of continuous field operation at ~75% rated power on a full tank (34.3 gal / 129.8 L).
Estimated 75% Load Fuel Burn~4.2 gal/hr (15.7 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Belarus MTZ-82 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Belarus MTZ-82.
Converted Equivalents:
Horsepower (HP)80 hp
Kilowatts (kW)59.7 kW
Metric Horsepower (PS / CV)81.1 PS
Direct Competitor Comparison
Compare Belarus MTZ-82 against same-era industry alternatives in the same horsepower class.
Current Model
Belarus
Belarus MTZ-82
Engine Power:Diesel (listed): 80 hp / 59.7 kW
★ Baseline Reference
Related models
Belarus 500
- Power:
- 65
- Production years:
- 1978 - 1981
Belarus 505
- Power:
- 65
- Production years:
- 1983 - 1990
Belarus 506
- Power:
- 65
- Production years:
- 1989 - 1996
Belarus 520
- Power:
- 65
- Production years:
- 1979 - 1991
Belarus 525
- Power:
- 65
- Production years:
- 1983 - 1996