Bolens G242

The Bolens G242 is a tractor produced by Bolens. It is equipped with a 72.2 ci 1.2 L engine. The listed engine power is Diesel (listed): 24 hp / 17.9 kW. Transmission: 9 forward and 3 reverse. Operating weight: 600 lbs 272 kg.

Engine Power
Diesel (listed): 24 hp / 17.9 kW
Fuel & Capacities
4.3 gal 16.3 L
Transmission
9 forward and 3 reverse
Operating Weight
600 lbs 272 kg

Overview

No photo available
1979 - 1983 Compact Utility tractorIseki built Compact Utility tractor Iseki built
Production
Distributor
Bolens
Manufacturer
Iseki
Compact Utility tractor
Variants
G242
2WD
G244
4WD
TS2220
similar Iseki model
Bolens G242 Engine
Isuzu 1.2L 2-cyl diesel
Fuel tank
4.3 gal 16.3 L
Engine details ...
Bolens G242 Transmission
9-speed gear
Transmission details ...
Bolens G242 Power
Engine
24 hp 17.9 kW
Mechanical
Two-wheel drive
Differential lock
mechanical rear
Manual steering
Mechanical shoe brakes
Open operator station. Two-post ROPS (#1960) optional with available canopy. Soft-side cab (#19706) optional
Hydraulics
Type
open center
Pressure
2000 psi 137.9 bar
Pump flow
3.1 gpm 11.7 lpm
Tractor hitch
Rear Type
1
Control
Position control
Power Take-off (PTO)
Rear PTO
transmission
Rear PTO Type
540/1000
Dimensions & Tires
Wheelbase
58.3 inches 148 cm
Weight
1672 lbs 758 kg
Front tire
4.00-12
Rear tire
8.3/8-24
Full dimensions and tires ...
Electrical
Ground
negative
Battery volts
12
References
G242 references literature
Equipment Seminar published in 1982
Diesel Tractors published in 1979, by Bolens
Diesel Tractors - The Work Machines published in 1980, by Bolens

Engine

Engine Detail — 72.2 ci / 1.2 L Diesel

Manufacturer
Isuzu 2AB1
Fuel Type
Diesel
Configuration
2-cylinder, liquid-cooled
Displacement
72.2 ci 1.2 L
Power
24 hp 17.9 kW
Pre-heating
glow plugs
Rated RPM
2600
Torque
50 lb-ft 67.8 Nm
Torque RPM
2000
Starter
electric
Starter volts
12

Transmission

Transmission — 9 forward and 3 reverse gear

Type
gear
Gears
9 forward and 3 reverse
Clutch
dry disc
G242  gear speeds

Dimensions

Bolens G242 Tires
Standard tires (ag)
Front: 4.00-12. Rear: 8.3/8-24
Dimensions
Wheelbase
58.3 inches 148 cm
Length
105.5 inches 267 cm
Width
47.6 inches 120 cm
Height
75.4 inches 191 cm
Weight
1672 lbs 758 kg
Ground clearance
11.8 inches 29 cm
Front tread
37.4 inches 94 cm
Rear tread
38 to 48 inches 96 to 121 cm

Attachments

Attachment overview
54" mid-mount mower deck
Snowblower
Blade
Front-end loader
Backhoe
54" Mower deck
Type
mid-mount Bolens 1954
3-blade with hydraulic lift
Cutting width
54 inches 137 cm
Weight
300 lbs 136 kg
Cut height
1 to 5 inch 2 to 12 cm
Bolens 17380 Backhoe
Backhoe type
Bolens 17380 Backhoe
Weight
600 lbs 272 kg
Digging depth
78 inches 198 cm
Reach from pivot
94 inches 238 cm
Loading height
53 inches 134 cm

Recommended Implements & Sizing Guide

Engineering recommendations for Bolens G242 based on its 24 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
1 to 2 Bottom (12")1 - 2 铧 (30 cm)Light DutyIdeal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing
4 ft (48 in)1.2 mLight DutyPasture clipping and light brush under 1" diameter.
Rotary TillerSeedbed Prep
42 to 48 in105 - 120 cmLight DutyCovers compact tractor tire width.
Disc HarrowSecondary Tillage
5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)Light DutySmall acreage soil break-up and secondary aeration.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Bolens G242.

Estimated Continuous Field Runtime: 3.4 hrs

Approximately 3.4 hours of continuous field operation at ~75% rated power on a full tank (4.3 gal / 16.3 L).

Estimated 75% Load Fuel Burn~1.2 gal/hr (4.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Bolens G242 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Bolens G242.

Converted Equivalents:

Horsepower (HP)24 hp
Kilowatts (kW)17.9 kW
Metric Horsepower (PS / CV)24.3 PS

Direct Competitor Comparison

Compare Bolens G242 against same-era industry alternatives in the same horsepower class.

Current Model
Bolens

Bolens G242

Engine Power:Diesel (listed): 24 hp / 17.9 kW
★ Baseline Reference
KubotaMarket Competitor

Kubota T22

Engine Power:21.6
Production Years:1999 - 1999
Allis ChalmersMarket Competitor

Allis Chalmers C

Engine Power:21.6
Production Years:1940 - 1949
MitsubishiMarket Competitor

Mitsubishi GSK226

Engine Power:21.6
Production Years:2018 - 2026
IsekiMarket Competitor

Iseki RTS22

Engine Power:21.6
Production Years:2016 - 2023