Branson 3725H
The Branson 3725H is a tractor produced by Branson. It is equipped with a 127.2 ci 2.1 L engine. The listed engine power is Diesel (net): 37 hp / 27.6 kW. Transmission: infinite forward and reverse (3-range). Operating weight: 1230 lbs 557 kg.
Engine Power
Diesel (net): 37 hp / 27.6 kW
Fuel & Capacities
12 gal
45.4 L
Transmission
infinite forward and reverse (3-range)
Operating Weight
1230 lbs
557 kg
Overview
 | 2017 -
Compact Utility tractor |
|---|---|
2017 - | |
Compact Utility tractor | |
Production | |
|---|---|
Manufacturer | Branson (a part of Kukje) |
Compact Utility tractor | |
Variants | |
|---|---|
3725R | ROPS shuttle |
3725H | ROPS hydrostatic |
3725C | Cab shuttle |
3725CH | Cab hydrostatic |
Branson 3725H Engine | |
|---|---|
Kukje 2.1L 4-cyl diesel | |
Engine details ...  |
Branson 3725H Transmission | |
|---|---|
hydrostatic | |
Transmission details ...  |
Branson 3725H Power | |
|---|---|
Engine (net) | 37 hp
27.6 kW |
PTO (claimed) | 32 hp
23.9 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Differential lock | mechanical rear |
Power steering | |
Wet disc brakes | |
Two-post folding ROPS. | |
Capacity | |
|---|---|
Fuel | 12 gal
45.4 L |
Hydraulic system | 10 gal
37.9 L |
Hydraulics | |
|---|---|
Type | open center |
Capacity | 10 gal
37.9 L |
Pressure | 2100 psi
144.8 bar |
Pump flow | 10.4 gpm
39.4 lpm |
Total flow | 15.4 gpm
58.3 lpm |
Steering flow | 5 gpm
18.9 lpm |
Tractor hitch | |
|---|---|
Rear Type | I |
Control | position control |
Rear lift (at ends) | 3306 lbs
1499 kg |
Rear lift (at 24"/610mm) | 2420 lbs
1097 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Clutch | electro-hydraulic wet disc |
Rear PTO Type | 540/540E (1.375) |
Engine RPM | 540@2500 |
540E@2000 | |
Dimensions & Tires | |
|---|---|
Wheelbase | 71.1 inches
180 cm |
Weight | 4153 lbs
1883 kg |
Front tire | 9.5x16 |
Rear tire | 12.4x28 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 70 |
Battery volts | 12 |
Engine
Engine Detail — 127.2 ci / 2.1 L Diesel
Manufacturer | Kukje A2000N3-UTR4 |
Fuel Type | Diesel |
Configuration | 4-cylinder, liquid-cooled |
Displacement | 127.2 ci
2.1 L |
Bore/Stroke | 3.31x3.70 inches
84 x 94 mm |
Emissions | Tier IV |
Power (net) | 37 hp
27.6 kW |
Air cleaner | dual dry element |
Compression | 22:1 |
Rated RPM | 2600 |
Starter | electric |
Starter volts | 12 |
Oil capacity | 7 qts
6.6 L |
Coolant capacity | 6.4 qts
6.1 L |
Transmission
Transmission — infinite forward and reverse (3-range) hydrostatic
Type | hydrostatic |
Gears | infinite forward and reverse (3-range) |
Oil capacity | 40 qts
37.9 L |
Dimensions
Branson 3725H Tires | |
|---|---|
Standard tires (ag) | Front: 9.5x16. Rear: 12.4x28 |
Industrial front | 10x16.5-6 |
Industrial rear | 420/70x24-6 |
Dimensions | |
|---|---|
Wheelbase | 71.1 inches
180 cm |
Length | 129 inches
327 cm |
Width | 60.2 inches
152 cm |
Height (ROPS) | 96 inches
243 cm |
Shipping weight | 4153 lbs
1883 kg |
Ground clearance | 13.1 inches
33 cm |
Attachments
Attachment overview | |
|---|---|
Front-end loader | |
Backhoe |
Branson BH76 Backhoe | |
|---|---|
Backhoe type | Branson BH76 Backhoe |
Weight | 1340 lbs
607 kg |
Transport height | 85.2 inches
216 cm |
Bucket width | 16 inches
40 cm |
Digging depth | 91.2 inches
231 cm |
Reach from pivot | 123.6 inches
313 cm |
Loading height | 90 inches
228 cm |
Bucket Rotation | 149° |
Swing Arc | 180° |
Bucket force | 4554 lbs
2065 kg |
Dipperstick force | 2530 lbs
1147 kg |
Branson BH86 Backhoe | |
|---|---|
Backhoe type | Branson BH86 Backhoe |
Weight | 1500 lbs
680 kg |
Transport height | 91.2 inches
231 cm |
Bucket width | 16 inches
40 cm |
Digging depth | 103.2 inches
262 cm |
Reach from pivot | 134.4 inches
341 cm |
Loading height | 92.4 inches
234 cm |
Bucket Rotation | 151° |
Swing Arc | 180° |
Bucket force | 4435 lbs
2011 kg |
Dipperstick force | 2694 lbs
1221 kg |
Branson K710 Backhoe | |
|---|---|
Backhoe type | Branson K710 Backhoe |
Weight | 1230 lbs
557 kg |
Transport height | 119 inches
302 cm |
Bucket width | 16 inches
40 cm |
Digging depth | 94 inches
238 cm |
Reach from pivot | 127 inches
322 cm |
Loading height | 51 inches
129 cm |
Bucket Rotation | 175° |
Swing Arc | 180° |
Bucket force | 3190 lbs
1446 kg |
Dipperstick force | 1980 lbs
898 kg |
Photos
Branson 3725H tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Branson 3725H based on its 37 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm) | Medium Duty | Standard utility farm tillage. |
Rotary Cutter / MowerMowing & Clearing | 5 ft (60 in)1.5 m | Medium Duty | Pasture maintenance and weeds up to 1.5" diameter. |
Rotary TillerSeedbed Prep | 54 to 60 in135 - 150 cm | Medium Duty | Thorough seedbed preparation in orchards and vegetable plots. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Hay BalerHay & Forage | Small Square Baler (14x18")小方捆打捆机 (36x46 cm) | Medium Duty | Classic 2-string baler for horse and small livestock hay. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Branson 3725H.
Estimated Continuous Field Runtime: 6.2 hrs
Approximately 6.2 hours of continuous field operation at ~75% rated power on a full tank (12 gal / 45.4 L).
Estimated 75% Load Fuel Burn~1.9 gal/hr (7.3 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Branson 3725H Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Branson 3725H.
Converted Equivalents:
Horsepower (HP)37 hp
Kilowatts (kW)27.6 kW
Metric Horsepower (PS / CV)37.5 PS
Direct Competitor Comparison
Compare Branson 3725H against same-era industry alternatives in the same horsepower class.
Current Model
Branson
Branson 3725H
Engine Power:Diesel (net): 37 hp / 27.6 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 15-30
Engine Power:33.3
Production Years:1917 - 1921
McCormick-DeeringMarket Competitor
McCormick-Deering 15-30
Engine Power:33.3
Production Years:1923 - 1929
Related models
Branson 3015H
- Power:
- 30
- Production years:
- 2016 - 2023
Branson 3015R
- Power:
- 30
- Production years:
- 2015 - 2023
Branson 3110i
- Power:
- 31
- Production years:
- 2008 - 2018
Branson 3120R
- Power:
- 31
- Production years:
- 2011 - 2015
Branson 3510
- Power:
- 35
- Production years:
- 2002 - 2005