TractorData Logo
TractorData

Fendt Farmer 308

The Fendt Farmer 308 is a tractor produced by Fendt. It is equipped with a 253.5 ci 4.2 L engine. The listed engine power is Diesel (listed): 96 hp / 71.6 kW. Transmission: 21 forward and reverse. Operating weight: 9172 lbs 4160 kg.

Engine Power
Diesel (listed): 96 hp / 71.6 kW
Fuel & Capacities
28.3 gal 107.1 L
Transmission
21 forward and reverse
Operating Weight
9172 lbs 4160 kg

Overview

Fendt Farmer 308 tractor photo
1993 - 2000 Farmer 300 SeriesRow-Crop tractor Farmer 300 Series Row-Crop tractor
Production
Manufacturer
Fendt
Row-Crop tractor
Fendt Farmer 308 Engine
MWM 4.2L 4-cyl diesel
Fuel tank
28.3 gal 107.1 L
Engine details ...
Fendt Farmer 308 Transmission
21-speed three-speed power shift
Transmission details ...
Fendt Farmer 308 Power
Engine
96 hp 71.6 kW
Mechanical
Four-wheel drive
Differential lock
electro-hydraulic front and rear
Power steering
Hydraulic disc brakes
Cab standard with air-conditioning.
Hydraulics
Pump flow
19.8 gpm 74.9 lpm
Tractor hitch
Rear lift
9896 lbs 4488 kg
Power Take-off (PTO)
Rear PTO
independent
Clutch
electro-hydraulic
Rear PTO Type
540/750/1000
Front PTO
independent OptOptional
Clutch
electro-hydraulic
Front PTO Type
1000
Dimensions & Tires
Wheelbase
89.8 inches 228 cm
Weight
9172 lbs 4160 kg
Front tire
380/70R24
Rear tire
480/70R34
Full dimensions and tires ...
Electrical
Ground
negative
Charging system
alternator
Charging amps
95
Battery volts
12
Battery AH
110
References
Farmer 308 references literature
Farmer 307 - 308 - 309 - 310 - 311 - 312 published in 1993, by Fendt

Engine

Engine Detail — 253.5 ci / 4.2 L Diesel

Manufacturer
MWM TD226.B4
Configuration
turbocharged diesel, 4-cylinder, liquid-cooled
Displacement
253.5 ci 4.2 L
Bore/Stroke
4.134x4.72 inches 105 x 120 mm
Power
96 hp 71.6 kW
Rated RPM
2250
Torque
260.4 lb-ft 353.1 Nm
Torque RPM
1500
Starter
electric
Starter volts
12
Fendt Farmer 308 Engine
Fendt Farmer 308 engine image

Transmission

Transmission — 21 forward and reverse three-speed power shift

Type
three-speed power shift
Gears
21 forward and reverse
Three gears, in two ranges, with a three-speed power shift. Additional three overdrive gear ranges. The 40 kph overdrive was not available in all markets.
Farmer 308 three-speed power shift speeds

Dimensions

Fendt Farmer 308 Tires
Standard tires (ag)
Front: 380/70R24. Rear: 480/70R34
Optional tires (ag)
Front: 13.6-24. Rear: 13.6R38
Front: 13.6-24. Rear: 14.9R38
Front: 14.9R24. Rear: 18.4R34
Front: 420/70R24. Rear: 520/70R34
Front: 420/70R24. Rear: 480/70R38
Front: 460/70R24. Rear: 540/70R34
Front: 480/65R24. Rear: 600/65R34
Front: 11.2R28. Rear: 11.2R44
Front: 9.5R32. Rear: 9.5R48
Dimensions
Wheelbase
89.8 inches 228 cm
Length
159.1 inches 404 cm
Width
84.3 inches 214 cm
Height (cab)
105.1 inches 266 cm
Weight
9172 lbs 4160 kg
Max weight
16535 lbs 7500 kg
Front tread
67.3 inches 170 cm
Rear tread
65.4 inches 166 cm

Attachments

Attachment overview
Fendt 3/60 loader
Fendt 3S loader

Photos

Fendt Farmer 308 tractor photo

Fendt Farmer 308 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Fendt Farmer 308 based on its 96 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)Heavy DutyHeavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing
10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼Heavy DutyWide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep
78 to 84 in200 - 215 cmHeavy DutyHeavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage
10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙Heavy DutyAggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage
5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机Heavy DutyHigh density baling; requires minimum 85 PTO HP.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Fendt Farmer 308.

Estimated Continuous Field Runtime: 5.7 hrs

Approximately 5.7 hours of continuous field operation at ~75% rated power on a full tank (28.3 gal / 107.1 L).

Estimated 75% Load Fuel Burn~5 gal/hr (18.9 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Fendt Farmer 308 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Fendt Farmer 308.

Converted Equivalents:

Horsepower (HP)96 hp
Kilowatts (kW)71.6 kW
Metric Horsepower (PS / CV)97.3 PS

Direct Competitor Comparison

Compare Fendt Farmer 308 against same-era industry alternatives in the same horsepower class.

Current Model
Fendt

Fendt Farmer 308

Engine Power:Diesel (listed): 96 hp / 71.6 kW
★ Baseline Reference
Massey FergusonMarket Competitor

Massey Ferguson 4445

Engine Power:86.5
Production Years:2004 - 2011
View Full Specs→
International HarvesterMarket Competitor

International Harvester 844-S

Engine Power:87
Production Years:1975 - 1989
View Full Specs→
ClaasMarket Competitor

Claas Axos 320 C

Engine Power:87
Production Years:2008 - 2018
View Full Specs→
New HollandMarket Competitor

New Holland T4040F

Engine Power:87
View Full Specs→

Related models