CaseIH Farmall 105U

The CaseIH Farmall 105U is a tractor produced by Caseih. It is equipped with a 274 ci 4.5 L engine. The listed engine power is Diesel (gross): 105 hp / 78.3 kW. Transmission: 24 forward and reverse. Drive type: 4x2 2WD. Operating weight: 7.275 to 7936 pounds.

Engine Power

Diesel (gross): 105 hp / 78.3 kW

Drive & Traction

4x2 2WD

Fuel & Capacities

33.5 gal 126.8 L

Transmission

24 forward and reverse

Operating Weight

7.275 to 7936 pounds

Overview

	2008 - 2016 Model year 2008-20122013-2016 Farmall U SeriesUtility tractor Farmall U Series Utility tractor

Production
Manufacturer	CaseIH
Utility tractor
Built in Jesi, Italy

CaseIH Farmall 105U Engine
FPT 4.5L 4-cyl diesel
Fuel tank	33.5 gal 126.8 L
Engine details ...

CaseIH Farmall 105U Power
Engine (gross)	105 hp 78.3 kW
PTO (claimed)	90 hp 67.1 kW
PTO (tested)	94.4 hp 70.4 kW
Performance test details ...

Mechanical
Drive	4x2 2WD
	4x4 MFWD 4WD (optional)
Steering	hydrostatic power
Hydraulic wet disc brakes
Straddle deck platform with ROPS; cab optional

Hydraulics
Type	open center
Valves	2 rear, 1 mid (optional)
Pump flow	16.1 gpm 60.9 lpm
Total flow	26.5 gpm 100.3 lpm
Steering flow	10.4 gpm 39.4 lpm

Tractor hitch
Rear Type	2
Control	mechanical lower-link draft control, optional electronic draft control (EDC)
Rear lift (at 24"/610mm)	5,745 lbs 2605 kg
	6,445 lbs (EDC) 2923 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/1000

Dimensions & Tires
Wheelbase	92.2 inches (2WD) 234 cm
	92.5 inches (4WD) 234 cm
Weight	7.275 to 7936 pounds
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	120
Battery CCA	960
Battery volts	12

References

Farmall Series Utility Tractors published in 2008, by CaseIH

Engine

Engine Detail — 274 ci / 4.5 L Diesel

Manufacturer	FPT
Configuration	turbocharged intercooled diesel, 4-cylinder, liquid-cooled
Displacement	274 ci 4.5 L
Bore/Stroke	4.094x5.197 inches 104 x 132 mm
Emissions	Tier 3
Power (gross)	105 hp 78.3 kW
Air cleaner	dual dry elements
Pre-heating	grid heater
Compression	17:1
Rated RPM	2300
Starter	electric
Starter volts	12

Transmission

Transmission options
12-speed mechanical shuttle
20-speed mechanical shuttle with creeper
12-speed power shuttle
24-speed power shuttle with partial power shift

Transmission — 12 forward and reverse mechanical shuttle

Type	mechanical shuttle
Gears	12 forward and reverse
Clutch	dry disc
Three ranges with four gears per range. Left-hand reverser requires use of clutch to change directions

Transmission — 20 forward and 12 reverse mechanical shuttle with creeper

Type	mechanical shuttle with creeper
Gears	20 forward and 12 reverse
Clutch	dry disc

Transmission — 12 forward and reverse power shuttle

Type	power shuttle
Gears	12 forward and reverse
Clutch	dry disc

Transmission — 24 forward and reverse power shuttle with partial power shift

Type	power shuttle with partial power shift
Gears	24 forward and reverse
Clutch	wet disc
12x12 power shuttle with high-low power shift.

Dimensions

CaseIH Farmall 105U Tires

Dimensions
Wheelbase	92.2 inches (2WD) 234 cm
	92.5 inches (4WD) 234 cm

CaseIH Farmall 105U Weight
Shipping	6,834 lbs (2WD ROPS) 3099 kg
	7,496 lbs (4WD ROPS) 3400 kg
	7.275 lbs (2WD cab) 3 kg
	7,936 lbs (4WD cab) 3599 kg

CaseIH Farmall 105U Height
ROPS	108.9 inches 276 cm
Cab	100.8 inches 256 cm
Exhaust	117.5 inches 298 cm

Tests

OCED Tractor Test 2526
Diesel 12-speed 4WD December 2008 - February 2009, Link: OCED Tractor Test 2526 file
PTO performance
Max power	94.4 hp 70.4 kW
Fuel use	5.8 gal/hour 22.0 l/hour
Power at rated engine speed	93.2 hp 69.5 kW
Fuel use	5.9 gal/hour 22.3 l/hour
Power at rated PTO speed	93.7 hp 69.9 kW
Fuel use	5.9 gal/hour 22.3 l/hour

Attachments

Attachment overview
CaseIH L730 loader
CaseIH L740 loader

Photos

Case IH Farmall 105U with cab.

Case IH Farmall 105U with ROPS and front-end loader.

Recommended Implements & Sizing Guide

Engineering recommendations for Caseih Farmall 105U based on its 105 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Caseih Farmall 105U.

Estimated Continuous Field Runtime: 6.1 hrs

Approximately 6.1 hours of continuous field operation at ~75% rated power on a full tank (33.5 gal / 126.8 L).

Estimated 75% Load Fuel Burn~5.5 gal/hr (20.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours