CaseIH Farmall 120U

The CaseIH Farmall 120U is a tractor produced by Caseih. It is equipped with a 207 ci 3.4 L engine. The listed engine power is Diesel (listed): 117 hp / 87.2 kW. Transmission: Autoshift. Operating weight: 10031 lbs 4550 kg.

Engine Power

Diesel (listed): 117 hp / 87.2 kW

Fuel & Capacities

43.6 gal 165.0 L

Transmission

Autoshift

Operating Weight

10031 lbs 4550 kg

Overview

	2016 - Farmall U SeriesUtility tractor
2016 -
Farmall U Series
Utility tractor

Production
Manufacturer	CaseIH
Utility tractor

CaseIH Farmall 120U Engine
FPT 3.4L 4-cyl diesel
Fuel tank	43.6 gal 165.0 L
Exhaust fluid (DEF)	3.2 gal 12.1 L
Engine details ...

CaseIH Farmall 120U Power
Engine	117 hp 87.2 kW
PTO (claimed)	100 hp 74.6 kW
Drawbar (tested)	76.2 hp 56.8 kW
PTO (tested)	104.6 hp 78.0 kW
Performance test details ...

Mechanical
Four-wheel drive
Final drives	inboard planetary
Power steering
Wet disc brakes
Cab standard with air-conditioning.

Hydraulics
Type	open center
Rear valves	2 or 3
Pump flow	21.1 gpm 79.9 lpm

Tractor hitch
Rear Type	II
Control	electronic draft control
Rear lift (at 24"/610mm)	8809 lbs 3995 kg
Drawbar	Cat. 2

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/1000

Dimensions & Tires
Wheelbase	93.7 inches 237 cm
Weight	10031 lbs 4550 kg
Front tire	14.9R24
Rear tire	460/85R34
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	120
Battery volts	12

References

Utility Farmall U Series Tractors published in 2018, by CaseIH
Farmall Utility Series Tractors published in 2021, by CaseIH

Engine

Engine Detail — 207 ci / 3.4 L Diesel

Manufacturer	FPT
Configuration	turbocharged aftercooled diesel, 4-cylinder, liquid-cooled
Displacement	207 ci 3.4 L
Bore/Stroke	3.90x4.33 inches 99 x 110 mm
Emissions	Tier IV
Power	117 hp 87.2 kW
Fuel system	electronic high-pressure common rail direct injection
Rated RPM	2300
Starter	electric
Starter volts	12

Transmission

Transmission options
16-speed 4-speed power shift
16-speed
32-speed creeper

Transmission — 16 forward and reverse 4-speed power shift

Type	4-speed power shift
Gears	16 forward and reverse
Four power shift gears in four ranges with shuttle.

Transmission — Autoshift

Transmission	Autoshift
Gears	16 forward and reverse
Type	creeper
Gears	32 forward and reverse

Dimensions

CaseIH Farmall 120U Tires
Standard tires (ag)	Front: 14.9R24. Rear: 460/85R34

Dimensions
Wheelbase	93.7 inches 237 cm
Length	165 inches 419 cm
Width	88.5 inches*Width across fenders. 224 cm
Height (cab)	107 inches 271 cm
Flange rear axle

CaseIH Farmall 120U Weight
	10031 lbs 4550 kg
Ballasted	13669 lbs (field) 6200 kg
	17637 lbs (road) 8000 kg

Tests

OCED Tractor Test 2972
Diesel 16-speed 4WD February 2016 - March 2016, Link: OCED Tractor Test 2972 file
PTO performance
Max power	104.6 hp 78.0 kW
Fuel use	5.9 gal/hour 22.3 l/hour
Power at rated engine speed	103.5 hp 77.2 kW
Fuel use	6.1 gal/hour 23.1 l/hour
Power at rated PTO speed	104.6 hp 78.0 kW
Fuel use	5.9 gal/hour 22.3 l/hour
Drawbar performance
Max power	76.2 hp 56.8 kW
Fuel use	6.1 gal/hour 23.1 l/hour
Gear 6L used for power test.
Max pull	9015 lbs 4089 kg
Gear 4L used for pull test.

Attachments

Attachment overview
CaseIH L103 loader
CaseIH L103 MSL loader

Photos

CaseIH Farmall 120U tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Caseih Farmall 120U based on its 117 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Caseih Farmall 120U.

Estimated Continuous Field Runtime: 7.2 hrs

Approximately 7.2 hours of continuous field operation at ~75% rated power on a full tank (43.6 gal / 165 L).

Estimated 75% Load Fuel Burn~6.1 gal/hr (23 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours