CaseIH Farmall 25A

The CaseIH Farmall 25A is a tractor produced by Caseih. It is equipped with a 80.4 ci 1.3 L engine. The listed engine power is Diesel (gross): 24.6 hp / 18.3 kW. Transmission: infinite forward and reverse (3-range). Operating weight: 2469 lbs 1119 kg.

Engine Power

Diesel (gross): 24.6 hp / 18.3 kW

Fuel & Capacities

7.4 gal 28.0 L

Transmission

infinite forward and reverse (3-range)

Operating Weight

2469 lbs 1119 kg

Overview

	2024 - Compact Utility tractor
2024 -
Compact Utility tractor

Production
Manufacturer	CaseIH
Compact Utility tractor

Variants
Workmaster 25	similar New Holland model

CaseIH Farmall 25A Engine
Mitsubishi 1.3L 3-cyl diesel
Fuel tank	7.4 gal 28.0 L
Engine details ...

CaseIH Farmall 25A Power
Engine (gross)	24.6 hp 18.3 kW
PTO (claimed)	19.2 hp 14.3 kW

Mechanical
Four-wheel drive
Differential lock	mechanical rear
Power steering
Two-post folding ROPS.

Hydraulics
Type	open center
Rear valves	1 OptOptional
Pump flow	7.9 gpm 29.9 lpm

Tractor hitch
Rear Type	I
Rear lift (at 24"/610mm)	1433 lbs 650 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540 (1.375)
Engine RPM	2000

Dimensions & Tires
Wheelbase	65.9 inches 167 cm
Weight	2469 lbs 1119 kg
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Battery volts	12

References

Farmall Compact 25A Specifications published in 2023, by CaseIH

Engine

Engine Detail — 80.4 ci / 1.3 L Diesel

Manufacturer	Mitsubishi
Configuration	turbocharged diesel, 3-cylinder, liquid-cooled
Displacement	80.4 ci 1.3 L
Bore/Stroke	3.07x3.62 inches 78 x 92 mm
Emissions	Tier IV
Power (gross)	24.6 hp 18.3 kW
Rated RPM	2500
Starter	electric
Starter volts	12

Transmission

Transmission options
12-speed sync shuttle
hydrostatic

Transmission — 12 forward and reverse sync shuttle

Type	sync shuttle
Gears	12 forward and reverse
Clutch	dry disc

Transmission — infinite forward and reverse (3-range) hydrostatic

Type	hydrostatic
Gears	infinite forward and reverse (3-range)

Dimensions

CaseIH Farmall 25A Tires

Dimensions
Wheelbase	65.9 inches 167 cm
Length	117.2 inches 297 cm
Height (ROPS)	88.2 inches 224 cm
Height (Folded ROPS)	68.2 inches 173 cm
Weight	2469 lbs 1119 kg

Attachments

Attachment overview
Front-end loader
Backhoe

CaseIH BH80 Backhoe
Backhoe type	CaseIH BH80 Backhoe

Recommended Implements & Sizing Guide

Engineering recommendations for Caseih Farmall 25A based on its 24.6 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	1 to 2 Bottom (12")1 - 2 铧 (30 cm)	Light Duty	Ideal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing	4 ft (48 in)1.2 m	Light Duty	Pasture clipping and light brush under 1" diameter.
Rotary TillerSeedbed Prep	42 to 48 in105 - 120 cm	Light Duty	Covers compact tractor tire width.
Disc HarrowSecondary Tillage	5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)	Light Duty	Small acreage soil break-up and secondary aeration.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Caseih Farmall 25A.

Estimated Continuous Field Runtime: 5.8 hrs

Approximately 5.8 hours of continuous field operation at ~75% rated power on a full tank (7.4 gal / 28 L).

Estimated 75% Load Fuel Burn~1.3 gal/hr (4.8 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours