CaseIH Farmall DX24E

The CaseIH Farmall DX24E is a tractor produced by Caseih. It is equipped with a 61.3 ci 1.0 L engine. The listed engine power is Diesel (gross): 24 hp / 17.9 kW. Transmission: infinite forward and reverse (2-range). Operating weight: 1323 lbs 600 kg.

Engine Power
Diesel (gross): 24 hp / 17.9 kW
Fuel & Capacities
7.9 gal 29.9 L
Transmission
infinite forward and reverse (2-range)
Operating Weight
1323 lbs 600 kg

Overview

CaseIH Farmall DX24E tractor photo
2004 DXE SeriesCompact Utility tractor DXE Series Compact Utility tractor
Production
Manufacturer
CaseIH (a part of CNH)
Compact Utility tractor
Variants
TZ24DA
similar New Holland model
SX24
similar Shibaura model
CaseIH Farmall DX24E Engine
Shibaura 1.0L 3-cyl diesel
Fuel tank
7.9 gal 29.9 L
Engine details ...
CaseIH Farmall DX24E Transmission
hydrostatic
Transmission details ...
CaseIH Farmall DX24E Power
Engine (gross)
24 hp 17.9 kW
PTO (claimed)
18 hp 13.4 kW
Mechanical
Four-wheel drive
Power steering
Two-post ROPS. Canopy and soft cab optional.
Hydraulics
Type
open center
Pump flow
3.75 gpm 14.2 lpm
Total flow
5.5 gpm 20.8 lpm
Steering flow
1.85 gpm 7.0 lpm
Tractor hitch
Rear Type
I
Rear lift (at 24"/610mm)
700 lbs 317 kg
Power Take-off (PTO)
Rear PTO
independent
Rear PTO Type
540 (1.375)
Mid PTO
independent
Mid PTO Type
2200
Dimensions & Tires
Wheelbase
55 inches 139 cm
Weight
1323 lbs 600 kg
Full dimensions and tires ...
Electrical
Ground
negative
Battery volts
12
References
Farmall DX24E references literature
DX Series Farmall Tractors published in 2004, by CaseIH
DX Series Farmall Tractors published in 2003, by CaseIH
DX Series Farmall Tractors and Integrated Implements published in 2004, by CaseIH

Engine

Engine Detail — 61.3 ci / 1.0 L Diesel

Manufacturer
Shibaura S773
Fuel Type
Diesel
Configuration
3-cylinder, liquid-cooled inline
Displacement
61.3 ci 1.0 L
Bore/Stroke
3.03x2.83 inches 77 x 72 mm
Power (gross)
24 hp 17.9 kW
Compression
23:1
Rated RPM
3000
Idle RPM
1300-3225
Firing order
1-2-3
Starter volts
12

Transmission

Transmission — infinite forward and reverse (2-range) hydrostatic

Type
hydrostatic
Gears
infinite forward and reverse (2-range)

Dimensions

CaseIH Farmall DX24E Tires
Dimensions
Wheelbase
55 inches 139 cm
Shipping weight
1323 lbs 600 kg

Attachments

Attachment overview
54" mid-mount mower deck
60" mid-mount mower deck
Snowblower
Blade
Front-end loader

Photos

CaseIH Farmall DX24E

CaseIH Farmall DX24E

Recommended Implements & Sizing Guide

Engineering recommendations for Caseih Farmall DX24E based on its 24 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
1 to 2 Bottom (12")1 - 2 铧 (30 cm)Light DutyIdeal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing
4 ft (48 in)1.2 mLight DutyPasture clipping and light brush under 1" diameter.
Rotary TillerSeedbed Prep
42 to 48 in105 - 120 cmLight DutyCovers compact tractor tire width.
Disc HarrowSecondary Tillage
5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)Light DutySmall acreage soil break-up and secondary aeration.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Caseih Farmall DX24E.

Estimated Continuous Field Runtime: 6.3 hrs

Approximately 6.3 hours of continuous field operation at ~75% rated power on a full tank (7.9 gal / 29.9 L).

Estimated 75% Load Fuel Burn~1.2 gal/hr (4.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Caseih Farmall DX24E Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Caseih Farmall DX24E.

Converted Equivalents:

Horsepower (HP)24 hp
Kilowatts (kW)17.9 kW
Metric Horsepower (PS / CV)24.3 PS

Direct Competitor Comparison

Compare CaseIH Farmall DX24E against same-era industry alternatives in the same horsepower class.

Current Model
Caseih

CaseIH Farmall DX24E

Engine Power:Diesel (gross): 24 hp / 17.9 kW
★ Baseline Reference
KubotaMarket Competitor

Kubota T22

Engine Power:21.6
Production Years:1999 - 1999
Allis ChalmersMarket Competitor

Allis Chalmers C

Engine Power:21.6
Production Years:1940 - 1949
MitsubishiMarket Competitor

Mitsubishi GSK226

Engine Power:21.6
Production Years:2018 - 2026
IsekiMarket Competitor

Iseki RTS22

Engine Power:21.6
Production Years:2016 - 2023