CaseIH JX1095N
The CaseIH JX1095N is a tractor produced by Caseih. It is equipped with a 238 ci 3.9 L engine. The listed engine power is Diesel (gross): 91 hp / 67.9 kW. Transmission: mechanical shuttle. Operating weight: 5820 to 6107 pounds.
Engine Power
Diesel (gross): 91 hp / 67.9 kW
Fuel & Capacities
15 gal
56.8 L
Transmission
mechanical shuttle
Operating Weight
5820 to 6107 pounds
Overview
 | 2005 - 2008
JXN SeriesOrchard/Vineyard tractor
JXN Series
Orchard/Vineyard tractor |
|---|
Production | |
|---|---|
Manufacturer | CaseIH |
Orchard/Vineyard tractor | |
CaseIH JX1095N Engine | |
|---|---|
Case IH 3.9L 4-cyl diesel | |
Fuel tank | 15 gal
56.8 L |
Engine details ...  | |
CaseIH JX1095N Transmission | |
|---|---|
16-speed | |
Transmission details ...  |
CaseIH JX1095N Power | |
|---|---|
Engine (gross) | 91 hp
67.9 kW |
PTO (claimed) | 80 hp
59.7 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Differential lock | electro-hydraulic rear |
Power steering | |
Hydraulic wet disc brakes | |
Two-post mid-mount foldable ROPS. Cab optional. | |
Hydraulics | |
|---|---|
Type | open center |
Pressure | 2610 psi
180.0 bar |
Rear valves | 2 |
Pump flow | 16.9 gpm
64.0 lpm |
Total flow | 23.4 gpm
88.6 lpm |
Steering flow | 6.5 gpm
24.6 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Control | mechanical lower-link draft sensing |
Rear lift | 3962 lbs
1797 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Clutch | mechanical dry disc |
Rear PTO Type | 540/1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 85.6 inches
217 cm |
Weight | 5820 to 6107 pounds |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 65 |
Battery CCA | 800 |
Battery volts | 12 |
Engine
Engine Detail — 238 ci / 3.9 L Diesel
Manufacturer | Case IH |
Configuration | turbocharged diesel, 4-cylinder, liquid-cooled |
Displacement | 238 ci
3.9 L |
Bore/Stroke | 4.094x4.528 inches
104 x 115 mm |
Emissions | Tier II |
Power (gross) | 91 hp
67.9 kW |
Fuel system | mechanical direct injection |
Rated RPM | 2300 |
Torque | 264 lb-ft
358.0 Nm |
Torque RPM | 1400 |
Starter volts | 12 |
Transmission
Transmission — mechanical shuttle
Transmission | mechanical shuttle |
Gears | 16 forward and reverse |
Four synchronized gears in four ranges with mechanical shuttle. | |
Dimensions
CaseIH JX1095N Tires |
|---|
Dimensions | |
|---|---|
Wheelbase | 85.6 inches
217 cm |
Length | 158 inches
401 cm |
Width | 53.4 inches*Minimum width
135 cm |
Ground clearance | 10.5 inches
26 cm |
CaseIH JX1095N Weight | |
|---|---|
ROPS | 5820 lbs
2639 kg |
Cab | 6107 lbs
2770 kg |
Max front axle | 4409 lbs
1999 kg |
Max rear axle | 6614 lbs
3000 kg |
CaseIH JX1095N Height | |
|---|---|
Hood | 51 inches
129 cm |
ROPS | 91.6 inches
232 cm |
Cab | 90.7 inches
230 cm |
Photos
CaseIH JX1095N tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Caseih JX1095N based on its 91 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 7 to 8 ft (84-96 in)2.1 - 2.4 m | Heavy Duty | Heavy-duty twin spindle cutter for overgrown acreage. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Caseih JX1095N.
Estimated Continuous Field Runtime: 3.2 hrs
Approximately 3.2 hours of continuous field operation at ~75% rated power on a full tank (15 gal / 56.8 L).
Estimated 75% Load Fuel Burn~4.7 gal/hr (17.9 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Caseih JX1095N Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Caseih JX1095N.
Converted Equivalents:
Horsepower (HP)91 hp
Kilowatts (kW)67.9 kW
Metric Horsepower (PS / CV)92.3 PS
Direct Competitor Comparison
Compare CaseIH JX1095N against same-era industry alternatives in the same horsepower class.
Current Model
Caseih
CaseIH JX1095N
Engine Power:Diesel (gross): 91 hp / 67.9 kW
★ Baseline Reference
Related models
CaseIH 685
- Power:
- 73
- Production years:
- 1985 - 1990
CaseIH C70
- Power:
- 73
- Production years:
- 1998 - 2002
CaseIH CX70
- Power:
- 73
- Production years:
- 1998 - 2002
CaseIH Farmall 75A
- Power:
- 74
- Production years:
- 2019 - 2026
CaseIH Farmall 80CL
- Power:
- 74
- Production years:
- 2024 - 2026